Why Go Wireless Lighting? Venue Tetra Control 2 and Venue Link - a fun and affordable solution!

Подписаться 6 тыс.

Просмотров 1,9 тыс.

50% 1

A few reasons you should be using wireless lighting and an overview of the Venue Tetra Control 2 and Venue Link.
Tetra Control 2 - dmx controller
guitar-center....
Venue Link -
guitar-center....
Venue Products - Guitar Center
guitar-center....
Mic Used
amzn.to/459tH68
O-Clamps for hanging lights (I use these for other lights and for attaching lights to speaker poles)
amzn.to/3Jhyg5r
American DJ Lighting Stand I Use
amzn.to/35g6QtK
Hazer
amzn.to/3m2rFOO
My next totems
amzn.to/3LcYCX3
Wireless Lapel mic MOVO
amzn.to/3eSbnu3
Zoom f2 Compact recorde - lavalier
amzn.to/3J2vC36
Camera Light from SANDMARC -Battery Operated LED
bit.ly/3Ej9TR4
Editing Software used is Cyberlink Power Director 20
amzn.to/3wpN5y3
Batteries of Choice for Wireless Gear
amzn.to/3bbbWtF
Camera Light
amzn.to/3gtqQxp
ZOMEi 14" Dimmable Ring Light
amzn.to/2SiVQX4
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@Mdnesseptx 2 дня назад

i have the first one and i use wireless dongle transmitter to rockville wireless wedges and best 60 lighting. Works great!! nice vid brother!

@KrisSzanto 2 дня назад

@@Mdnesseptx Thanks. I had done a video of the first one a few years ago. Solid. 🤘

@carlosem6498 День назад

Just got my controller today. Here is a short video of how the wireless dongle works with any light 🙌 thanks again ! ru-vid.comnTOTeEBdc2A?si=9KY-QO7QKGoMKO3X

@KrisSzanto День назад

@carlosem6498 Nice work. Just an FYI- it does not work with any wireless light. The wireless signal is the same, but you have to be able to limit the channels to where the profile does not have a master dimmer or strobe. I have similar light to yours that are fine because I can set them to a channel mode that is rgb or rgbaw. I have been fielding questions on this for years after I did the Tetra 1. Happy it works.with yours!

@discodoug55 8 дней назад

How is that proprietary interface .... looks like a BNC connector ... better unless you purchase ALL Venue Lighting units. If you have ANY DMX lighting today, it is all XLR and that controller can not work with it UNLESS (I believe you said it in the video) you use the Tetra controller for one unit and then daisy-chain, using XLR (microphone) cables? Do they have a receiver that has the XLR connector?

@KrisSzanto 8 дней назад

@discodoug55 All of the lights and the controller have regular dmx ins and outs as well. The Tetra Link sends and receives a regular 2.4g dmx signal just like most wireless dmx. The Controller is compatible withe some other wash light but not moving lights. Have to refer to controller manual and other fixture manuals to see if the profiles and ch selections will work. (I've mentioned this in my first tetra video a few tears ago) I hope this answers your question. Thanks for watching. More video info to come.

@djdannybhtx 9 дней назад

Love this! Would love to check this out!!!

@KrisSzanto 9 дней назад

@@djdannybhtx Cool system. Works well together.

@davemelvin5331 7 дней назад

Kris,I own the gen 1 version of this controller. Besides the wireless, what does the new unit off above the original. Nothing out there that defines what the button for movers does. Can you do a full review breaking down the functions please?

@KrisSzanto 6 дней назад

Thanks for watching. As mentioned in the video, the movements for the select VENUE movers (not for OTHER MOVING FIXTURES) has been pre made. There are a number of different movements that will be affected by which chase selection you choose. Some are of a figure 8 movement, some triangle, up down, circle etc.. They are all pre programmed. You can turn them on/off - the speed is affected by speed control which will change speed of everything. A long press will flip the dual movers to use other side of dual sided heads. This is for very simplified control. This unit will NOT work for other moving fixtures.

@davemelvin5331 6 дней назад

@@KrisSzanto thank you Kris

@carlosem6498 2 дня назад

Hi Kris, I own the first generation of this controller. Love the ease and flexibility of it. Is the wireless dongle capable of send DMX signal to other transmitters like my wireless uplights ? What would be awesome!

@KrisSzanto 2 дня назад

@carlosem6498 The Venue Link transmits and or receives a standard 2.4g signal just like most wireless lights. So if you have lights that work with the tetra control now that are wireless, venue link can also be used.

@carlosem6498 2 дня назад

@@KrisSzanto Great news and it’s hard to believe that such an inexpensive controller packs all this features, the best is to have the whole echo system. Thanks man!

@angelmarley2253 5 дней назад

Did you get 2 new double headed moving lights? Looks like the Derby light on one side and a 4 point par can light on the other.

@KrisSzanto 5 дней назад

@angelmarley2253 that was a venue revolver wash and a venue revolver laser

@KrisSzanto 9 дней назад

The links should be good now. Thanks for watching and commenting/chatting. - Kris

@GordonDeere 3 дня назад

Does it work with different lights

@KrisSzanto 3 дня назад

@GordonDeere This will work with other wash lights only if they have the correct profile and channel settings. (Some do, some don't - my first Tetra vid explains this a bit. It was a couple years ago) This will not work with other movers or effect lights.

@Aero-ko5ex 5 дней назад

Hey Kris, What moving heads should I use for a Huge gym with a stage in front? the gym is as big as a soccer field

@KrisSzanto 5 дней назад

@Aero-ko5ex Hey, thanks for watching. What are you lighting? The stage, the gym floor?

@Aero-ko5ex 3 дня назад

@@KrisSzanto the stage but I also want some beams coming out I plan to have 4 on the ceiling.

@tipitip1637 9 дней назад

i hope it s something afforrdable

@bennyben1955 4 дня назад

Can you connect other lighting to this controller? Example any color key lighting.

@KrisSzanto 3 дня назад

@bennyben1955 This will work with other wash lights only if they have the correct profile and channel settings. (Some do, some don't - my first Tetra vid explains this a bit. It was a couple years ago) This will not work with other movers or effect lights.

@bullpuppy689 9 дней назад

hey i have the older tetra controller can the venue link be used on it??

@KrisSzanto 9 дней назад

@bullpuppy689 unfortunately it can not. It is a specially designed small four pin. It does however send and or receive normal 2.4g signal like most wireless lighting. So you could use a different wireless transmitter and still receive with venue link on its newer lights.