Why Steam Engine Simulator IS a Good Game 

how?

@@NoNameAtAll2 put it in demon mode, add some water and max fire. Gater some pressure and when ready let it in the engine getting some speed. When only a little water remains fully shut off the engine valve and wait for the last little bit to boil. Wait until you have 100+ pressure then fully open the water input. It won't flow because of too high pressure. Wait for max temp then slowly open the valve to the engine (it should already be going quite fast from earlier) to about 40% open. Then pressure will drop but when it reaches 100 water will be added. The water will instantly boil providing pressure. Then slowly open the engine valve to around 54% or 55%. Then wait until it reaches max speed. If you open the engine valve or reduce pressure too much in any way the temp will also drop so water can not instantly boil meaning water pools and rapidly decreases temp creating a vacuum which stops the engine.

i got 4753 rpm once@@Man_of_Cheese

@@TalksWithNoise Ok thank you

@@Raphael-vh1wv and to exit the mode either type sorry or click the youtube link

It is referred as daemon mode by the dev.

You have bothered the dev mode

it doesnt work for me@@TalksWithNoise

exactly what i was thinking

He is what we all pretend to be

@@andresmartinezramos7513 this is actually so true wtf

@@TalksWithNoise yes, slowly add throttle, I reached up to 3950 rpm

I got up to 4687.3 rpm, with 60% throttle, just enough water getting in the tank to keep 50-60 psi at 150°C. You can press the "?" button on the bottom left corner to see the parameters more clearly. And lower the quality of the simulation to it's minimum by pressing "N" and scrolling down.

I can sustain 3650 with a constant flow of water, max throttle, and max fire. I kept it just barely overflowing

You can disable the pressure blow off valve (i think demon mode automaticaly does that). The water input pressure maxes out at 100psi so you can't just add more all the time.

What I mean is the pressure will stay at 100 because you supplying a never ending chain of water

@@nerfgodbigguy1405 the issue is that 100psi isn't really enough to go really fast. yes it will go forever but the force it has will not reach the peak.

Ah understood

@@MascottDeepfriar also adding more water will cool down the temperature

theres a ICE engine simulator from the same developer

Rockets have a nozzle for the same reason; a little high energy exhaust is more efficient than a lot of low energy exhaust.

This simulator was released June 2023. What the fuck are you on about?

@@TalksWithNoise by make it run smoothly at 2~3 % throttle (looks at the controls) and the slowly opening it more and more (photo here: drive.google.com/file/d/1z2u1o4qqk-JIqAv2unpl1tNmaEnHUfS7/view?usp=sharing )

If conway's game of life already gets called a game, then this is 100% A game.