Why two watertanks? - How we installed a pelton wheel for hydro power

Подписаться 10 тыс.

Просмотров 6 тыс.

50% 1

Many of you were asking why we built those two water tanks. In this video are some answers for you guys.
We installed a small pelton turnbine, to generate some hydro power for our off grid electrical system. For this we use the water from the upper watertank.
Also we wanted to collect water from a spring at the lower watertank and make if available up at the house. So we installed a pump here.
Enjoy.

Опубликовано:

23 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@runs_through_the_forest 9 дней назад

for some top info on the turbine check kris harbour natural living, from what i saw in his experiments with optimizing such a generator the most serious "flaw" might be the material choice, metal is much more durable and the plastics from nozzle and scoops will get reduced into micro plastics in the water and cause serious contamination.. also horizontal setup makes for a batter drainage so the splashing water doesn't create unwanted drag slowing the turbine.. sorry for the lengthy remarks, at least you guys are doing it, trying and working towards a bright future in what looks like a very cool and wild place in nature... cheers and keep at it, all the best to you!!!

@kdenyer1 7 дней назад

Good idea to. Prototype with plastic but as others have mentioned I would monitor for brake down of the plastic into micro-plastics.😊

@vale.do.salgueiro 11 часов назад

Thanks for the great suggestions, will experiment more with this wheel and try to learn what works best for our set up. Some time will consider to get a metal version!

@LVH994 День назад

Great work!!!

@D-B-Cooper 4 дня назад

It would be interesting to see how much difference it would make to mount the wheel horizontally with a less turbulent exit. I didn’t get the details of the pump up to the house but seems like a ram pump might work that would get rid of the necessity for electricity.

@IrenESorius 9 дней назад

Serious stupid to house a Pelton-wheel in such a small box. Always mount the wheel horisontal, not vertical, so the "used" water does,nt hit the wheel and slows it down. Cheers from Sweden,, 🍻😎👍‍

@marivilas801 8 дней назад

What a beautiful place! 💚

@mp7986 9 дней назад

If you increase the size of the hole the mass flow rate is not going to increase...it's always the same, because of the mass conservation law, greater area means lower exit speed but always the same mfr

@vale.do.salgueiro 11 часов назад

Well probably you are right in theory, I can tell you though, that the generated power increased significantly when we increased the diameter of the opening. Probably the opening initially was simply too small. When the opening is fully closed, you get no water flowing, right? When the opening is a hair thin, then you will get some water sprinkling out, but it will not be as much as when the opening is the diameter of the pipe. So probably we were in this regime where the whole was almost "closed" in comparison to the pipe diameter and increasing the nozzle diameter helped quite a bit to reduce friction.

@mp7986 9 часов назад

@@vale.do.salgueiro yes for sure there is a range of diameters in which the viscosity effect on the walls that appears as friction is predominant, what you say makes perfectly sense, thanks for sharing this example🤙