Why won't my DJI FPV Controller 2 work with the Caddx Vista backwards compatibility firmware?

Подписаться 4,5 тыс.

Просмотров 36 тыс.

50% 1

Looks like a number of folks are having challenges getting their DJI FPV Controller 2 working with the new Vista backwards compatibility firmware that released on December 8th. Here are some troubleshooting steps you can follow to hopefully get you up are running!
=========================
Items suggested in this video
=========================
My Favorite Screwdrivers (Wiha Slotted & Phillips):
Amazon US: amzn.to/3tq15Eu
Amazon Canada: amzn.to/3E1Ph02
DJI FPV Remote Controller 2
Amazon US: amzn.to/3EPa8oJ
Amazon Canada: amzn.to/3XJRZ4w
DJI FPV Goggle V2:
Amazon US: amzn.to/3H9FGZk
Amazon Canada: amzn.to/3VLHQlY
DJI O3 Air Unit:
Amazon US: amzn.to/3WZnupK
Amazon Canada: amzn.to/3jJszUR
GetFPV: bit.ly/3ioEE1s
XING2 1404 4600kv Motors:
Banggood: www.banggood.com/custlink/mG3...
GetFPV: bit.ly/3GQa7mz
iFlight 20x20mm F7 Flight Stack:
Banggood: www.banggood.com/custlink/3vK...
GetFPV: bit.ly/3vLrWx3
XING2 2207 Motors:
Banggood: www.banggood.com/custlink/3D3...
GetFPV: bit.ly/3XiAvuR
iFlight 30x30mm F7 Flight Stack:
Banggood: www.banggood.com/custlink/vKv...
GetFPV: bit.ly/3H0THbr
============================
Videos you may want to check out
============================
Playlist: DJI O3 Digital FPV System | Reviews, Guides, & How Tos
• DJI O3 Digital FPV Sys...
#djifpv #fpv #drones
Mandatory Disclaimer: I participant in the Amazon Services LLC Associates Program, which is an affiliate advertising program designed to provide a means to earn fees by linking to Amazon.com and affiliated sites. Item suggestion links above are affiliate links and I will receive compensation if you choose to use them. There is no cost to you to use these links and any compensation received goes right back into the channel

Наука

Опубликовано:

16 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 438

@hoangnguyen-dk7tv Год назад

Thank you very very much sir. You are the only one out there making this video to fix this problem. I have asked other RU-vidrs and none have done it. Thank you very much. ❤

@Mangorille Год назад

Welcome, happy flying!

@JennaCee 11 месяцев назад

Just want to say a big thank you for making this video! It helped me a lot with my controller and the 'new' Nazgul I have with the caddex vista system in it. Yes it's from last year.

@Mangorille 11 месяцев назад

Welcome. Happy flying!

@barraca1393 Год назад

Finally, searched everywhere, tried everything but the cli commands. Thank you for that!

@Mangorille Год назад

No problem, happy flying!

@devthethird2644 Год назад

Thanks man, that betaflight trick at the end fixed my problem.

@Mangorille Год назад

Glad it helped!

@dmsigp66 Год назад

Thanks...this applies to my DJI O3 and remote controller 2 as well. Big like👍👍👍

@emanuelgiraudo_ Год назад

Did you have the sbus disabled from betaflight?

@amycreighton Год назад

Thankyou so much! You saved my life! Couldnt find this anywhere! My sbus was set to off!!!! thanks so much!!!!!!!!!!!!!!!!!!😍

@rocraz01 3 месяца назад

Great. I was trying to make my RC2 connect to my Caddx Polar, but I couldn't because of the FAST SBUS. Great job. You now have another subscriber! Thanks!

@Mangorille 3 месяца назад

Welcome! Happy flying!

@BloggerCMartinez Год назад

I have had problems with the connection of the gray radio I will try those steps thank you very much you are the best✨️🤝

@nicolassantibanez182 Год назад

Te resolvió el problema?

@emanuelgarcia6827 Год назад

Helpful video bro thanks 🙏🏾

@Mangorille Год назад

No problem 👍 Happy flying

@Kakboon88 Год назад

Dude, thank you very much. After a lot of errors, finding out why my rc2 wont connect in betaflight, the "set sbus_baud_fast = off" was the turnaround! You got a new subscriber!

@verodyne4963 Год назад

AlfRalf... Which tab is this setting on?

@Kakboon88 Год назад

@@verodyne4963 just type it into CLI. Type in "set sbus_baud_fast" to see if its on or off, if its off, activate it via "set sbus_baud_fast = on"

@Mangorille Год назад

Glad to hear that it helped, welcome to the channel! Ya, that baud fast gets a lot of people as you can only see it in the Betaflight CLI and of course everyone turns it on in the goggles when they see baud fast not realizing you need to manually turn it on in the CLI ;)

@verodyne4963 Год назад

@@Kakboon88 Thank you for the advice. It was off and I corrected it, but mine is still not connecting properly. I can bind and see the camera through the goggles. I can also bind the controller 2 but I can't get it to start the drone.

@Kakboon88 Год назад

@@verodyne4963 Did you change the settings in the goggles according to Mangorilles Video?

@sergeygrishin2794 Год назад

Thank you so much!

@Mangorille Год назад

Welcome. Happy flying!

@brent2327 Год назад

This really helped me out !!! My controller worked when I set it on “standard”

@Mangorille Год назад

Great! You can use the DJI HDL (BAUD Fast) but you need to make sure you have the goggles set to that mode and you run the CLI command in this video.

@Jsvids85 Год назад

@@Mangorille I’ve been looking everywhere. What is the difference between the 2 settings and can u use the same one on the vista and O3? Thank you soooo much! Lastly if u use Tbs or elrs does it even matter what this is set to in betaflight?

@Mangorille Год назад

@@Jsvids85 The sbus_baud_fast is the DJI HDL protocol which is "supposed" to be a lower latency link with a 7mn latency. You can use both the regular sbus or sbus_baud_fast with the vista and O3. TBS or ELRS will not use this as they use the crossfire communication protocol.

@Jsvids85 Год назад

@@Mangorille thank you!! Love the vids, they are so helpful! Appreciate your feedback :)

@jklst1000 Год назад

Thank you for your help. that worked for me. specially for the CLI command resolved the issue. Now, I have to find which buttons are Aux 1,2,3...

@Mangorille Год назад

Glad it helped, happy flying!

@user-wz3fz5lq7n 9 месяцев назад

This is only tutorial that explains very clear and not some of RU-vidrs are fast thinking all newbie like me can get it right away Thank you for making this happen looking forward for more beginners tutorials 🍻👏👌🤝

@Mangorille 9 месяцев назад

Thanks buddy, happy flying

@luisvela7975 Год назад

Thank you so much, made my day way easier. but can you do a video on how to configure the controller on betaflight

@RedCornStudios Год назад

Thank you!!

@davicoperformance5146 Год назад

¡Gracias! Fue de mucha utilidad! No estaba pudiendo vincular mi caddx vista con el remote controller 2 y con tu vídeo tutorial lo logré, saludos desde Uruguay!

@Mangorille Год назад

Glad that the video was helpful and thanks for the super thanks!

@davicoperformance5146 Год назад

@@Mangorille fue de mucha utilidad! Es la primera vez que tengo un dron con la caddx vista y no podía enlazar mi control de DJI, muchas gracias por ayudar a la comunidad de los drones con información tan útil, saludos a la distancia!

@scomparin796 3 месяца назад

I have a goggles v2 and an rc2, can anyone tell me if I can connect?

@yssgsg4865 10 месяцев назад

Hi thanks for making this video as I thought that the Runcam Link couldn’t bind properly with the RC2 and that I needed a separate RX on my GEPRC Crown. I was after the clean look which was why I bought the Crown eons ago and tried to digitalise it. Tried umpteen times till I came across the SBUS BOTS bIt!!!!

@Mangorille 10 месяцев назад

Welcome. The RC2 will work with the Link/Vista when used with a Goggles 2/Integra only. Happy flying!

@richmiller540 Год назад

Thank you so much for this, i've been pulling my hair out trying to get this dam thing working. I've watched other tutorials but none of them show the cli command. (subscribed)

@Mangorille Год назад

Welcome, glad you found it helpful.

@pikratfpvdoudoumadou 6 месяцев назад

Thanks a lot..... 🔥🔥🔥

@Mangorille 6 месяцев назад

No problem. Happy flying.

@nunohp0150 6 месяцев назад

fixed all my problem. awesome video THANK YOU VERY MUCH

@Mangorille 6 месяцев назад

Great news. Happy flying!

@mathiasg4982 6 месяцев назад

thnx very much, solved my problem with the last point 🙂

@Mangorille 6 месяцев назад

Great, happy flying!

@AndersPrintz Год назад

Great vid!😀

@Mangorille Год назад

Thanks! Happy flying!

@brandan_fpv Год назад

Thank you!!!!! Cli commands for the win!

@Mangorille Год назад

Great, happy flying!

@stevenstringer8467 Год назад

spot on, works now.

@berroncho360 4 месяца назад

Hola amigo. Tú crees que esto funcionará con las goggles v1 enlazar con dji controller 2??? Gracias saludos

@dannysdrone4160 11 месяцев назад

It would be very convenient to bind to the dji controller and vista directly without a special receiver. Thank you for the video

@Mangorille 11 месяцев назад

Welcome, happy flying.

@josea.izq.2081 Год назад

You are the Number 1...thanks veryyyyy..much!!!.

@josea.izq.2081 Год назад

Now I have only the problem to OSD on googles 2..I have texted in CL the requirements, but in my drone show error..any advice?

@LukeMegBiking 10 месяцев назад

Thank you so so much. Dude you saved my ass, I really appreciate your help. Big Up 👌

@Mangorille 10 месяцев назад

Welcome. Happy flying buddy!

@samavella8831 11 месяцев назад

Thanks for the video. It’s exactly what I was looking for. WRT Buttons mode settings, and PIDS and Rates, do you set these in BetaFlight or in the Goggles 2?

@Mangorille 11 месяцев назад

Welcome. Those are all done through betaflight. You can also use the MSP Canvas mode overlay menu in the goggles. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QII7nDGDd8s.html

@chadwilson6550 10 месяцев назад

UPDATE I got it would have never happened with out your video. Thanks so much. I give up. Two days of trying to get this to work is way to long already. Wish it would just work with the black controller like it did before the update.

@Mangorille 10 месяцев назад

Weclome! Happy flying!

@PhillyDroneLife 11 месяцев назад

Thank you buddy. New sub From philly. I need all the be smart guys i can get around me.. Lol. ETA flight almost killed me a couple years ago which led me back to Camera Drones but here I am again back in beta flight and back with THEDemibot 5inch RIPPER...WEEEEEEEE MIKEY

@Mangorille 11 месяцев назад

Hey Mikey. Welcome to the channel. Stay safe out there, those 5 inch props can do some damage!

@PhillyDroneLife 11 месяцев назад

@@Mangorille 👊👊💙💙👍 Mikey

@petersongold7612 7 месяцев назад

Sensacional! Passei a tarde toda vendo vídeos e procurando uma solução! Esse vídeo resolveu meu problema! Parabéns pelo conteúdo!!! Ganhou mais um inscrito.

@Mangorille 7 месяцев назад

Thank you, glad it was helpful. Happy flying!

@black_knife4582 7 месяцев назад

Is it also possible to connect the Dji Goggles V1 and the Controller 2 at the same time to the original Air Unit?

@Mangorille 7 месяцев назад

No, the controller 2 only works with the o3 on goggles v2/goggles 2/goggles integra or the old generation air unit and goggles 2/goggles integra.

@hknight007 Год назад

Thank you for this great video, the previous remote 1 ran out of signal before de Goggles V2. Using the new Update with the Remote 2, allows you to at least match the Goggles 2 signal? Thank you

@Mangorille Год назад

Welcome. I never had the remote 1 run out of signal before the video. It was always video long before the remote. The remote 2 works a bit differently and it will drop as soon as you lose video. Stay tuned for a video...

@hknight007 Год назад

@@Mangorille thank you so much! I chose Crossfire from the start because I saw tons of comments of people claiming that the Remote 1 loses signal way before the Goggles. I've always wanted to use my Remote 2 and if works great with the Goggles 2, then I'll switch to full DJI cause Crossfire gives failsafe near Cell Towers (the DJI signal is unafected by the Towers). Thank you so much for your help, I'll stay tuned for your next video 👍👍👍

@Mangorille Год назад

@@hknight007 I wonder if that is because the regions weren't set correctly. For example, my TBS Tango 2 came set with 868mhz (wrong for my region and conflicts with the cell system here). I changed it to USA/CAN which is 915mhz and now it shouldn't conflict.

@hknight007 Год назад

@@Mangorille Thank you for your reply and help, I use 915mhz and 1W for power. I think I'll switch Crossfire (In 1 Quad) to the old DJI FPV System (Goggle V2 / Remote 1) and see how it performs, again very grateful for your help 👍

@Mangorille Год назад

@@hknight007 No problem, let me know what you find. I did a quick range test on the crossfire and remote controller 2 yesterday. Will upload tomorrow.

@Life_a_bike 7 месяцев назад

What’s the difference between the standard protocol vs the sbus baud fast?

@Mangorille 7 месяцев назад

The Baud Fast (which is really the DJI HDL protocol) is supposed to be lower latency at ~7ms. You probably won't notice any difference either way when the video link itself has a 20-40ms latency.

@IconicProps 9 месяцев назад

There is a DJI Standard preset that will help if this doesnt. I have followed a couple of these. And everything looked right but until I ran that, it didnt work (Dji standard or dji sbus fast) both run some cli commands that link things up. I remember finding a video the first time I did this that had two commands. This preset must run those.

@Mangorille 9 месяцев назад

You can use the preset, this will work without the preset if you check the correct settings outlined in the video. Remember that you need to type save after you make CLI changes.

@Life_a_bike 8 месяцев назад

Do I have to rebind if I switch from Vista to O3 ?

@Mangorille 8 месяцев назад

On which goggles?

@ActionArtsDigital Год назад

I am looking at the Flywoo Venom H20 2" Mini Hexacopter Drone - DJI HD w/ Naked Vista + Polar Nano (F4). Would this work for me, and if it does would I be able to switch back and forth like you did in the video between systems and still fly the dji fpv no problem? I am new so maybe this is a dumb question but I really don't want to buy the $300 mode 2 when I have the really nice small dji fpv controller.

@Mangorille Год назад

Not sure I completely understand the question. Are you asking if you can use your Goggles 2 (not Goggles V2) on both the Vista and the O3 system (switching between them)? If so, yes, but each time you switch you need to rebind the air unit (bug in the current firmware). The remote controller 2 (gray remote) will work with the O3 air unit and the Vista. For the Vista, you need to be on the backwards compatibility firmware (Dec 8th), which only works with the Goggles 2.

@jameshall592 4 месяца назад

Thank you for posting this! I have tried all of your trouble shooting tips but it’s still not working for me. The drone and beta flight respond to the buttons and switches but neither joystick works. The controller works perfectly in the simulator. Any other ideas?

@Mangorille 4 месяца назад

Never seen that before. If the buttons respond then it sounds like some sort of mapping issue. Double check your channel map is connect on the receiver tab.

@alexeikonev8020 Год назад

шthank you so much for this video! so i got what is my problem, yellow wire not connected to vista sbus

@Mangorille Год назад

Awesome that would be a big problem. :) The yellow wire is what is used to carry the receiver signal so you'd need that to use the DJI controller. Connect that to an available UART on your flight controller and then follow the steps in this video to set it up. Happy flying!

@alexeikonev8020 Год назад

@@Mangorille thank you!

@sketchpv3080 Год назад

Any idea how DJI Baud Fast compares to ELRS 250hz in terms of latency and jitter? I know these’s been some testing done and there were issues at first but has this latest firmware ironed it out?

@Mangorille Год назад

I’ll let someone else reply. Don’t have experience with ELRS.

@Eroc556 Год назад

Yes its been fixed in latest firmware

@cdramafpv Год назад

@@Eroc556 ???

@mrmoon_fpv 8 месяцев назад

have an issue with it but it's my guess at this point that I maybe fried the sbus port because I plugged it in before I realized the pinout was backwards. upon resoldering everything the VTX works perfectly but no response on the controller :/

@Mangorille 8 месяцев назад

Hmm, what did you connect the air unit SBUS wire to? If it was a 5v pad then it is possible that you fried the diode or another component in the air unit.

@mrmoon_fpv 7 месяцев назад

@@Mangorille The HD port on the FC was inverted to what the standard layout is set to so more than likely yeah I fried the SBUS. I contacted CADDX and they told them to either send it in or remove that diode for the SBUS to "fix" the situation. I may just install an ELRS transmitter to it and use that instead though. purchased another caddx vista and wired it properly the first time and bam everything works perfectly.

@TinChozZz Год назад

Thanks man, i do all the things on the video but still dont have any response from the sticks. I use to fly a Protek35HD with the vista, and know change it for the o3 unit.

@Mangorille Год назад

If you'd like, email me some pictures of each of those steps and I'll take a look if anything looks out of place.

@TinChozZz Год назад

@@Mangorille Thanks for all, i already sent it.

@AnthonyDupre Год назад

@@TinChozZz Hello there! Trying to configure a Protek25 HD and same results. I am able to bind the controller, but can't get any response from my sticks. Any other tips would be awesome

@TinChozZz Год назад

@@AnthonyDupre I ended up cutting all the wires and welding them to the FC free Receiver pads, and get stick response on betaflight, but on my first flight I noticed I didn't have Drone Voltage on the goggles soo i take another look to the FC and notice the R1 on the Diagram was the R3 on the FC. I changed the R and T on betaflight and got the Voltage. I recommend you to watch closely the R on the FC with the magnifying glass before cutting any cables.

@berroncho360 4 месяца назад

Hola amigo. Las goggles v1 se pueden vincular con dji controller 2?? Gracias un saludo

@Mangorille 4 месяца назад

Hey. No, only the v2 with the o3 or the goggles 2/integra with the vista or o3.

@epoweredrc 7 месяцев назад

So You have to have the newer Googles 2 for the Gray PS looking remote your using to link to the vista system? I have the DJI FPV goggles and remove and can get video from the vista system but can't get my remote to bind up to it.

@Mangorille 7 месяцев назад

Sounds like you have the Goggles V1? If you want to continue using your Vista and want to add the Gray remote, you'd need the Goggles 2 or Goggles Integra.

@epoweredrc 7 месяцев назад

@@MangorilleI have the V2 bigger goggles that come with the DJI FPV like $1000 combo kit.

@Mangorille 7 месяцев назад

@@epoweredrc Got it. You'd need the o3 air unit to use the gray remote with your Goggles V2. DJI gave us some backwards compatibility but not fully. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P7GkbQ2UKHU.html

@thomasgilbert6924 Год назад

Can I use the goggels v2 and air unit and vista to the remote 2

@Mangorille Год назад

No. Only goggles 2.

@proxemiafpv5746 11 месяцев назад

I hope it helps me. I too am bound see video feed. But no radio input on receiver tab. I had it set up the same for the DJI v1 controller. It should be using same uarts. I hope I fix it when I get home.

@Mangorille 11 месяцев назад

The setup and wiring is the same as the black DJI controller. Make sure you have the latest firmware on all components of the system (goggles, controller, and air unit). Also, make sure that the "Baud Fast" matches between your betaflight settings and goggles settings.

@proxemiafpv5746 11 месяцев назад

@@Mangorille thank you so very much! That was it! I set up fast settings and it worked beautifully! I think I like this controller a lot! I wish it had momentary switches but can’t have it all!

@Mangorille 11 месяцев назад

@@proxemiafpv5746 Welcome. Do a few range tests before you get too comfortable with that controller. I had issues with it back when the O3 first released. I know they've made firmware enhancements since.

@proxemiafpv5746 11 месяцев назад

@@Mangorille thanks. I like it. Feels good. Compact and convenient. I bound a bunch more older air units. Unfortunate that it doesn’t have multi bind. Had I known I had to rebind each time I switched drones, I would had let it alone. I may downgrade all the firmware and go back to using the older v1 radio. It’s just too big and clunky.

@Mangorille 11 месяцев назад

@@proxemiafpv5746 I found it had too many compromises for the features. It's a good choice if you already have it because of an Avata or something. Otherwise, a Tango 2 pro with the internal ELRS mod gives you the same footprint without the loss of features and only a bit more wiring on the drone side.

@philippekakine8435 8 месяцев назад

Hi its possible ton bind with dji googles v2 caddx vista and dji controller 2 ??

@Mangorille 7 месяцев назад

Not currently. With the goggles v2, you need an o3. If you have a googles 2 or goggles integra, you can do this with the vista.

@after8_FPV 2 месяца назад

thanks dude, saved me a lot of time ! it was the cli SBUS BAUD FAST for me

@Mangorille 2 месяца назад

No problem. Happy flying!

@steve30b 8 месяцев назад

Thanks for the video. Some good info here. Can you help me with my vista and controller 2, i have soldered all wires from the vista to the plug including the yellow as my flight controller wire diagram shows the yellow from the vista to the flight controller to be subs. So i have not took the yellow wire like you to another point,goggles and controller bind no problem, but i can’t get a response from the controller in beta flight.flight controller is a FLASHHOBBY F405 MPU600, Hope you can help. Thankyou.

@Mangorille 8 месяцев назад

Did you make sure to check the SBUS Baud Fast configuration is the same between the goggles and betaflight? That’s the usual issue. I’d suggest turning it off on both for your first test and see if that resolves the issue.

@steve30b 8 месяцев назад

thanks for the reply, my problem was i needed to download the dji sbus fast profile for beataflight, soon as i save this profile i got my dji controller 2 to show the inputs in beatflight, all good now its flying fine. thanks again. @@Mangorille

@zonartfpv 9 месяцев назад

What's the difference between sbus baud fast and standard? Why would you chose one versus the other?

@Mangorille 9 месяцев назад

Baud Fast is supposed to use the DJI HDL protocol which is lower latency. I suspect most won't feel any difference.

@zonartfpv 9 месяцев назад

@@Mangorille thanks a lot for the crystal clear explanation

@Mangorille 9 месяцев назад

@@zonartfpv No problem, happy flying!

@nikolaspetrouu Год назад

Hey guys, so I recently switched from the amazing TBS Tango 2 crossfire link to the DJI controller 2 sbus link, so I can fly it with the DJI AVATA and my DIY drones.The reason was so I don't have to carry two separate controllers around with me and because i wanted to new GOGGLES 2. I'm having a big problem with the DJI control I get micro failsafe very close to me and I get a failsafe around 50 meters away from me. I've tried SBus fast and standard in the DJI controller and still, I get the same performance. I am using the CADEX VISTA with the new update that allows it to connect to the googles 2 and work with the controller. Not sure if this is a bug but is anyone having these problems? Also, the google feed is excellent but the RC is not stable.

@hknight007 Год назад

I wanted to do the same so I can use the remote 2 only, so sad to hear about this problem :( Please let me know if you find a way to fix this issue, thank you! Best regards

@CappaGTC Год назад

Are the goggles, air unit and rc in the same firmware version?

@anthony.xavier Год назад

Appreciate the video but for some reason after all the steps, I’m still unable to get it to show up in BF. I’m working on the flywoo firefly 4s 1.6. It shows the fc connected to vista on RX4/TX4 but using UART4 still doesn’t do anything.

@Mangorille Год назад

Did you trace the yellow wire to see exactly where it is connected?

@christophermori1967 Год назад

I’m having the same issue. Any luck figuring this out?

@mamoshimiloni9559 Год назад

I have the googles v 2 and they have been working fine with diatone cinem that they came with. But the drone was really noisy that is why I removed it to a new flight controller 30.5*30.5mm HAKRC F722 DJI Stack 45A F7 3-6S Flight Controller and in that the connection from dji goes to the uart 6 on flight controller. I can see that the googles bind to the caddx viasta, but I do not have any image....:( do you have any idea maybe that can help me? Thank you

@Mangorille Год назад

If you have no image, this shouldn’t be caused by the flight controller as the air unit is self contained when it comes to image transmission. I’d check to make sure that the wiring looks okay, the air unit is getting power within specs, and then look closely at the camera cable. If everything looks okay, disconnect all vista wires from your flight controller except for the red and black (power) and see if the issue goes away. All else fails, do a firmware refresh on both the vista and goggles.

@KK-ol5ov Год назад

If you have multiple vista drones do you have to rebind each time you switch vista drones?

@Mangorille Год назад

Yes you do. The remote (at least on the prior software, not sure about the software that released yesterday) seems to only bind to one quad at a time.

@p.hda500f5 7 месяцев назад

muito bom!! salve do Brasil... eu consigo usar o goggles v2 e o controller 2 na air unit cadxx vista?

@Mangorille 7 месяцев назад

No, with the vista you need the goggles 2 or goggles integra to use the controller 2.

@bozzyxx6028 Год назад

Is this update also for the Caddx vista nano?

@Mangorille Год назад

Yes, this update works with all the prior system air units... Vista, Air Unit Lite, Link, etc... Note that once you do this update, currently your air unit will only work with the Goggles 2!

@11agila Год назад

Pero funciona con las v2 y el remote control 2 ?

@Mangorille Год назад

On the Vista or the O3 air unit?

@dondupuis4007 Год назад

everything seems to bind, updated sbus and receiver seem to work, but cant get motors to engage?

@Mangorille Год назад

Do you see the channel bars on the receiver tab move when you connect the quad to betaflight and move the sticks on the controller?

@saiyanfpv5358 Год назад

I have two different quads I have updated the vistas to the newest firmware, so they are compatible with the goggles 2 and the controller 2. The goggles and controller are also updated to the latest firmware. I have made sure that I have sbus baud fast turned on through CLI and I hit save, and it’s turned on in the goggles. I am using the wiring harness to connect to the flight controller and the Sbus goes to rx1 using that wiring harness my ports tab in betaflight has RX set to uart 1. When I power on the quad, the goggles and the radio everything connects. It’s just when I have the quad hooked up to beta flight. I get no stick movements in the receiver tab. I have tried unhooking sbus wire from the harness and soldering it to multiple different RX pads and changing the port in betaflight to the uarts I connected it too and that still didn’t work.

@Mangorille Год назад

Try turning sbus baud fast off, some have reported that they couldn't get that working (which is very suspect). Make sure you are typing save into the CLI after turning sbus baud fast on or off otherwise it won't take effect.

@saiyanfpv5358 Год назад

@@Mangorille I just tried this again. I went to cli changed it to set sbus_baud_fast = off then save. Still didn’t work. Made sure it was changed to standard In The goggles and still nothing. Then changed it all back to sbus on and nothing. The remote connects to the vista. It shows rc in the goggles Just betaflight won’t recognize it. This is 2 different quads with 2 different flight controllers I’m trying this on.

@Mangorille Год назад

@@saiyanfpv5358 Hmm. What you are seeing is usually a sign that the wiring is not correct for the yellow wire or you have the ports tab configuration incorrectly (sbus on the wrong port). But since you have checked all that, not sure what else you can try.

@mikegriego3671 5 месяцев назад

Will it also work with goggles V2?

@Mangorille 5 месяцев назад

Which air unit do you have? With the Goggles V2, you need the O3 to make this work.

@gonzarb93 Год назад

hello mangorille. Can i use the V2 googles and dji controller 2, can i use both with cadx vista?

@Mangorille Год назад

Hey. No you can’t. To use the controller 2 with the vista you need the goggles 2 or goggles integra.

@naveennishad Год назад

Can vista be connected with goggle v2 and controller 2 at time

@Mangorille Год назад

Not currently with the firmware we have. It only works with the goggles 2.

@aytacdiyaroglu1diyaroglu119 10 месяцев назад

Dji goggles and runcam are only bind in vista vtx version 6 and I want to add dji controller 2 to it but I can't bind because the controller is in the newest version and older versions are not available in the program. Dji assistant (dji fpv series)

@Mangorille 10 месяцев назад

The remote controller 2 only works with the vista and goggles 2/integra or the o3 and goggles v2/2/integra.

@aytacdiyaroglu1diyaroglu119 10 месяцев назад

@@Mangorille ı dont understand i have runcam caddx vista. it doesn't bind. so should i buy o3 unit?

@aytacdiyaroglu1diyaroglu119 10 месяцев назад

In short, I have dji controller 2, runcam caddx vista, goggles v2. How do I connect them together?

@Mangorille 10 месяцев назад

@@aytacdiyaroglu1diyaroglu119 Can't, You'd need to get a Goggles 2 / Integra.

@dnafpv 11 месяцев назад

This is such a great and clear video except mine will not bind under any circumstances no matter how many times I do exactly as the video shows. Im Already bound to my Caddx vista with my goggles 2 so I know my firmwares are correct on those 2. Im on 2.07 the latest radio firmware but it just won’t bind. Not sure how I can screw up holding down the power button until the lights scroll to put the radio in bind mode and pressing the bind button on the vista but apparently I am. Maybe i need to downgrade to the 2.04 you used…

@Mangorille 11 месяцев назад

I don't have this remote anymore so can't confirm with the latest firmware but you do want to try to get the later firmware working as DJI made updates to how this remote works and removed some of the items that actually made me give it up.

@dnafpv 11 месяцев назад

@@Mangorille thanks man my issue was the throttle not being all the way at zero

@YILDIZ1990 Год назад

Hei, can you tell the code/number of update like 1.6××× that worked for you? Thanks for effort.

@Mangorille Год назад

The backwards compatibility version from Dec 8th (V02.00.04.00) outlined here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P7GkbQ2UKHU.html

@mimarfpv 6 месяцев назад

I have Googgles V2, vista unit and controller 2. can i bind these three devices?

@Mangorille 6 месяцев назад

No. With the vista you’ll need the goggles 2 or goggles integra.

@TheStewish Год назад

Hey Mangorille! Any idea if it would be possible to use the DJI Controller 2 in conjunction with the DJI Goggles V2 and Caddx Vista? I figured given the relase notes, no, but is there a workaround?

@Mangorille Год назад

Not right now and I don’t know of any workaround. Hopefully in the future we get goggles v2 compatibility.

@ChasebirdFPV Год назад

@@Mangorille I read the realease notes and as see it the Goggle v2 can be used with dji fpv contoller 2, but no luck getting bound here on my side as well.

@Mangorille Год назад

@@ChasebirdFPV Are you looking at the Dec 8th release notes? It says that the Goggles V2 are not supported: "After updating, the air unit will not support DJI FPV Goggles V2, DJI FPV Goggles V1 and the DJI FPV remote controller. "

@ChasebirdFPV Год назад

@@Mangorille no, but you are correct, I read that FPV controller at the end thinking they were talking about the FPV controller (2)”. I didn’t know they were calling the first DJI black remote a fpv remote.

@Mangorille Год назад

@@ChasebirdFPV The naming confuses everyone, especially the goggles (come on, Goggles V2 and Goggles 2?!?!). The black remote is the FPV Remote Controller 1. :)

@IMHOvideochannel 9 месяцев назад

Looks like it doesn't work anymore after the last driver update. Won't brind to the V2 goggles. I don't even have the "FPV air unit" device option...

@Mangorille 9 месяцев назад

I don't have my V2 goggles anymore but that doesn't sound right. This remote never worked with the V2 and FPV Air Unit anyway. With the V2, you'd need the O3 air unit for this remote to work.

@IMHOvideochannel 9 месяцев назад

@@Mangorille Yes, now I know what happened. The last driver's update kill compatibility Caddx with DJI v2 Goggles. But I've got Integra, and with it (and goggles 2) Caddx is working fine. Your video helped me with Betaflight settings a lot, thanks!

@Mangorille 9 месяцев назад

@@IMHOvideochannel That is correct, if you go with the firmware from December (what I call the backwards compatibility firmware), then you can no longer use your Vista with the V2 and it only works with the Goggles 2 and Integra. Happy flying.

@johnhoover1982 Год назад

Having trouble switching my beta flight to s bus baudfast. I can only get it to work in standard. What is the difference between standard and S bus baudfast? Thanks in advance.

@Mangorille Год назад

They say that the baudfast is lower latency, I want to say 7ms if memory serves. You need to use the CLI command to turn it on in betaflight (make sure you send a save command afterwards) and then turn it on in the goggles menu.

@Cinoo90 Год назад

So if I have dji goggle v2 and nazgul. Evoque with caddax vista and grey remote control so it's mean I can bind and use 😮

@Mangorille Год назад

No, you need the Goggles 2 to make it work right now or the O3 and Goggles V2.

@YorkyPoo_UAV Год назад

I know these gimbals are small but how well would it still work for Cinematic drones?

@Mangorille Год назад

I'm sure you can get used to it with practice but would be easier to have the range of motion and precision of a full size controller.

@SkyLabsMiami Год назад

gamepad style remotes dont have full stick input therefore have less resolution when applying maneuvers to your thumbsticks. the longer the stick the more resolution which means you can be more precise

@josephlu0816 Год назад

Have you experienced remote 2 loses binding issue while you switch between New O3 AU & Old AU(Vista)?

@Mangorille Год назад

Yes, I suspect the remote controller 2 can only be bound to one device at a time. I had the same when I was testing between the Goggles V2 and Goggles 2, I'd need to rebind the Remote Controller 2 each time I switched. The same happens when using the Goggles 2 between the O3 and Vista (backwards compatibility firmware).

@josephlu0816 Год назад

Thx for your prompt reply 👍

@ferox1338 Год назад

so if i see it right, if i have the goggles v2 and the fpv controller 2 i´m not able to bind both of them? because with the new firmware i can connect the controller but not the goggles and the older firmware i can connect the goggles but not the controller?

@Mangorille Год назад

The goggles v2 and the controller 2 only work together with the o3 air unit. Otherwise you’ll need the goggles 2 or goggles integra to make it work with the vista.

@LehtusBphree2flyFPV 11 месяцев назад

Does this remote work with the V2 goggles and 03AU

@Mangorille 11 месяцев назад

Yes it does!

@gandaulf_fpv6925 Год назад

If the update is installed can I still use my V1 black transmitter as well?

@Mangorille Год назад

No the backwards compatibility firmware (Dec 8th firmware) makes the vista only work with the goggles 2 and the fpv controller 2. Check out the video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P7GkbQ2UKHU.html

@gandaulf_fpv6925 Год назад

@@Mangorille Can I use Goggles v2 vista and grey remote as a set up or do I have to have the Goggles 2? Thanks man.

@Mangorille Год назад

@@gandaulf_fpv6925 Only the goggles 2 works with the new firmware that supports the grey remote.

@gandaulf_fpv6925 Год назад

@@Mangorille Thank you for the info. I appreciate you!

@peppemo2430 Год назад

HI. can i use the fpv drone with caddx vista + goggles ''V2'' + remote control 2 ? (instead of goggless 2?)

@Mangorille Год назад

Not currently with the firmware that has been released by DJI. The Controller 2 only works with the Vista with the Goggles 2.

@janpeter7739 Год назад

Does it work with the goggles 1?

@Mangorille Год назад

No, currently only works with the O3/Goggles V2 or Goggles 2 or the Vista/Goggles 2.

@hdhdhdyshsh4277 7 месяцев назад

Good afternoon. Please tell me is it possible to link caddxvista with a remote control from DJI inspire 1?

@Mangorille 7 месяцев назад

No it is not, you can only use the DJI Remote Controller 1 (the black one) if you have the Goggles V1 or V2. Or you can use the DJI Remote Controller 2 (the gray one) if you have the Goggles 2/Goggles Integra.

@hdhdhdyshsh4277 7 месяцев назад

understood thanks... And what remotes can be connected to caddx vista without using glasses?

@Mangorille 7 месяцев назад

@@hdhdhdyshsh4277 The old school black DJI remote controller but given that it's discontinued, I'd suggest a stand alone control link, such as ELRS or Crossfire. The ELRS receiver are ~0.5-2 grams depending on which you go for. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-f8kZDjcRTOc.html

@Unknown-sl1qr Год назад

Thanks very much my bro can I use it with my dji air unit too?

@Mangorille Год назад

No problem. Need more details before answering. Which air unit and which goggles do you have?

@Unknown-sl1qr Год назад

@@Mangorille thanks I use dji goggle v1 and dji air unit and Caddx polar and I have dji controller v1 mode2. Can I use them ?

@Mangorille Год назад

@@Unknown-sl1qr No, right now the controller v2 is only compatible with the O3 air unit and Goggles 2/V2 or the old air unit with the Goggles 2.

@Unknown-sl1qr Год назад

@@Mangorille ah thanks 😊 so can I use old goggle and air unit/ Caddx polar and old v1 controller?

@Mangorille Год назад

@@Unknown-sl1qr Yes the Controller V1 works with the old Air Unit and Goggles V1/V2.

@sahil_kreates 4 месяца назад

hey i am having Dji v2 and RC2 and just baught runcam wasp but RC2 won't bind . when they are going to fix it or should I buy a new controller? thanks ......

@Mangorille 4 месяца назад

That combination is not compatible and I don't expect DJI to ever fix that. The Goggles v2 is the prior generation so DJI did the minimum of allowing you to use those goggles with the O3. If you want to use the RC2 you'll need either the Goggles 2/Integra with that Wasp or you'll need your Goggles v2 with an O3.

@sahil_kreates 4 месяца назад

@@Mangorille I thought staying in the DJI system is hasslefree. But Dji created mess in their ecosystem .

@Mangorille 4 месяца назад

@@sahil_kreates I went with a stand alone control link (ELRS) because of this.

@sahil_kreates 4 месяца назад

@@Mangorille Dji v2 + RC2 works fine with O3 but not with old air units hahaha dji screwed on this totally.

@extremevision8280 11 месяцев назад

I can't bind my DJI Controller 2 to my vista after doing all what I see in your video... Im using DJI goggles V2, DJI Controller 2 and Caddx vista

@Mangorille 11 месяцев назад

You need the Goggles 2 or Goggles Integra to use the Controller 2 with a Vista.

@DronieBoy Год назад

What firmware do you need on the controller for this to work?

@Mangorille Год назад

Date: 2022.12.08 Air Unit Firmware: v01.01.00.00 DJI Goggles 2 Firmware: v01.03.00.00 DJI FPV Remote Controller 2 Firmware: v02.00.04.00 DJI Assistant 2 (Consumer Drones Series): v2.1.15 I have a video about it here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P7GkbQ2UKHU.html

@outboxfpv4360 Год назад

wow. What about the range? Will it match with CRSF?

@nikolaspetrouu Год назад

Nope i get like 50 meters and i get fail safes.

@Mangorille Год назад

I'll test today and let you know. I don't expect the same range as crossfire just from the frequency it uses (915mhz for crossfire and 2.4 ghz for DJI remote). Usually the lower the frequency, the better it is at range and penetration.

@Mangorille Год назад

@@nikolaspetrouu You mean line of sight or behind obstacles?

@nikolaspetrouu Год назад

@@Mangorille I got failsafe whenever I go behind an obstacle and obstacle could be 50 m away and I get micro failsafes with line of sight

@Mangorille Год назад

@@nikolaspetrouu What exactly happens when it micro fail safes? Do you see the RC signal lines in the goggle drop? Do the green lights on the remote flash and the remote make that beeping sound?

@dronepilot260rc Год назад

If I bind my controller to say my air unit. Will it work on my v2 goggles or is this only for goggles 2?

@Mangorille Год назад

If you have the O3 then it works with both the Goggles V2 and Goggles 2. If you have the Vista, it only works with the Goggles 2.

@ZachManner Год назад

Do you have to use the goggles 2 to be able to use the remote 2 or can you use it when using the v2 goggles as well?

@YILDIZ1990 Год назад

As far as i understand is upgrading to use it with controller 2, lets lost connection between googles v2- air unit (fucking dji always does this to sell their stuff) FUCKKK

@Mangorille Год назад

Which air unit do you have? If you have the O3 air unit, you can use the FPV Controller 2 with both the Goggles 2 and the Goggles V2. If you have the old air unit/vista, you need the Goggles 2.

@YILDIZ1990 Год назад

@@Mangorille i have own build fpv with caddx nebula pro vista and also have dji fpv combo. My diy drone´s cheap chinese receiver is fried after half hour fly time. So i have to replace it or buy caddx vista compatible dji controller 1 which is over 398 euro in eu, or buy a new google with 800+ euro. Right?

@Mangorille Год назад

@@YILDIZ1990 Depends on how important it is for you to use the FPV Controller 2 and how comfortable you are with that thing. If you love that remote, you can get yourself the new Goggles Integra. Otherwise, go and buy yourself a nice ExpressLRS or Crossfire remote and be done with it. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QRpH3c9G-Y4.html

@dphotodrone Год назад

Heloo is posible bind the caddx vista with the remote 2 and goggles v2? Not te neu goggles??

@Mangorille Год назад

No, at least not right now. Hopefully DJI decides to release a firmware that will allow that.

@SimonaDrone 4 месяца назад

Очень круто, это замечательный обзор!!!

@Mangorille 3 месяца назад

Thanks!

@region2129 Месяц назад

Hello, I have the same problem, I set everything up, but when I turn on the drone a little, I raise the gas, it immediately turns over, and no matter what I did, I can’t understand why

@Mangorille Месяц назад

Flipping over right when it starts to get airborne is most likely not a remote control problem, but rather a motor or flight controller issue. Things to check: 1. In Betaflight, does the little quad graphic move in the correct direction when you move the quad? For example, if you tilt the quad right does the quad graphic also tilt right? 2. Are you sure all the motors are spinning in the correct direction? 3. Are you sure all the props are on correctly?

@emanuelgiraudo_ Год назад

Hello, I did everything as you did, but it still doesn't work, I have a 03. Any more ideas?

@Mangorille Год назад

Did you make sure to type save in the CLI after you made the changes? All all the devices on the latest DJI firmware including the controller?

@cdramafpv Год назад

So let me make sure I have this understood correctly. If I get DJI GOOGLES #2, I can then utilize my CADDX Vista or DJI AU #1 with the DJI FPV REMOTE CONTROLLER 2?

@Mangorille Год назад

Correct. Goggles 2 is the one you need (NOT Goggles V2).

@cdramafpv Год назад

@@Mangorille What's your thoughts about the future? I'm really hoping they make the Remote 2 compatible with AU 1/Vistas or is it technically not possible spec wise?

@cdramafpv Год назад

I have V2.. really holding off from trying to buy another goggle. I'm late.. but 2days fresh into wtfos and hopefully will maiden an DJI 03 tomorrow.

@Mangorille Год назад

@@cdramafpv I don't think anything stops them from making it work technically, look at the DJI FPV drone which works with the Goggles V2 and the Remote Controller 2. It would be more of a willingness for them to cannibalize sales of the Goggles 2.

@cdramafpv Год назад

@@Mangorille which is an Apple move they likely will not make. Looks like I'm need v2 and goggle 2 then. I'm wait it out a couple months and see what happens. 03 is amazing!

@alperenozgur Год назад

possible with fpv googles 2 and air unit lite?

@Mangorille Год назад

Yes, it works with the Dec 8th backwards compatibility firmware. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P7GkbQ2UKHU.html

@alperenozgur Год назад

@@Mangorille ok what i want is FPV googles v2 ( not googles 2 ), air unit, remote controller 2. thats not possible if i understood your video correct.

@Mangorille Год назад

@@alperenozgur Have to love the naming convention of the goggles... Correct, not yet compatible with the V2 goggles. I hope it will be some time in the future.

@DronesYjuguetes Год назад

Hello, I have the dji goggles v2, remote control 2 and caddx vista, I have updated and I can't link the remote control 2 with the caddx vista.

@Mangorille Год назад

Did you update the firmware on the DJI Goggles 2 and the Controller 2 as well? There is new firmware for all three components.

@DronesYjuguetes Год назад

@@Mangorille I have the v2 goggles, I don't have the new 2 goggles that you use in the video

@Mangorille Год назад

@@DronesYjuguetes There is no firmware that currently works with that combination of parts. The firmware that makes the vista work with the remote controller 2 only works with the Goggles 2 (not the Goggles V2).

@megiMove Год назад

What .. are you saying that my iflight Cidora 6s with dji caddx vista will work with my dji controller v2 ??

@Mangorille Год назад

Only if you have the goggles 2.

@mathFPV 10 месяцев назад

Hi friend, I have CADDX VISTA RunCam in my cinelog25 and I use DJI RC 2 and GOOGGLE INTEGRA. Is the same button that binds the GOGGLE the one that binds the radio? Sorry for the question, I'm Brazilian and I have difficulties in "translating" audio.

@Mangorille 10 месяцев назад

Yes the same button on the goggles is used for binding the radio.

@mattsperrazza683 Год назад

Hi I’m running into a problem where I have all my goggle v2 and controller 2 connected to my caddx but I’m not able to power my caddx and get on beta flight to make adjustments

@Mangorille Год назад

Not following the issue, are you saying that when you connect your flight controller to the computer via USB, betaflight is not detecting the port and letting you connect?

@mattsperrazza683 Год назад

Hi mangorille, so I am able to connect the beta flight when my battery is not plugged into my drone. The problem is when my battery isn’t plugged in my caddx has no power. The moment I plug in my battery to Power the caddx the connection to betaflight is instantly lost.

@Mangorille Год назад

@@mattsperrazza683 Saw your message, let me reply there

@wizl4035 Год назад

I have DJI FPV drone. (Not the avata) . Can I use my DJI remote controller 2 for caddx or DJI air unit? Since I have the goggles i want to buy iFlight Alpha A85 HD with caddx. But will it work with my DJI controller?

@Mangorille Год назад

You probably have the Goggles V2 correct? You need the Goggles 2 in order to use the vista with the fpv controller 2.

@wizl4035 Год назад

@@Mangorille yes i have the goggles v2 that came with DJI Fpv. Does that make my controller work with caddx and DJI air unit or what? Edit: oh ok i need the goggles 2 for it to work..that's a bummer. Need to buy a new controller then. Do you know any good controller that works with caddx and DJI air unit? Just not the old one from DJI it's to expensive here (450-500$ new)

@Mangorille Год назад

@@wizl4035 I'd just go with your favorite crossfire or elrs controller. This way you don't have to worry about compatibility in the future. It's a bit more involved to get setup initially but that's a one time pain. Something like the tango 2 or boxer is what I'd go with.

@wizl4035 Год назад

@@Mangorille so if I'd buy the tango 2 that will work with the iflight alpha A85 HD? It has DJI camera and caddx. Or what should I be looking for? I don't know if I go with elrs or crossfire and what it works with

@gamewithabc2219 Год назад

@@Mangorille wait I have the Goggles V2 and it connected just fine with my Cinelog 25 Dji Air unit. I also have the DJI controller 2. You're saying this setup won't work together?

@its_Savian Год назад

do this thing work in the goggles v2?

@Mangorille Год назад

Not currently, the backwards compatibility firmware only supports the Goggles 2. Hopefully we get a firmware that will support the Goggles V2.

@dvergara22 Год назад

Hello, what button or aux do you use to arme the dron. This is very complicate.

@Mangorille Год назад

I use the start stop button, top right corner.

@dvergara22 Год назад

@@Mangorille I have not been able to configure it unless I put something pre-armed. Could you make a tutorial or something please?

@Mangorille Год назад

@@dvergara22 Shoot me an email with a screenshot of the issue you're having please. It should be fairly straight forward.

@dvergara22 Год назад

@@Mangorille Hello, I sent you the email with a screenshot. Tell me what you think, regards.

@Mangorille Год назад

@@dvergara22 Hey. Don't see any email from you.

@MachineNavFPV 6 месяцев назад

I am still facing the issue I have done everything in the video, but I still dont see any response in betaflight under receiver.

@Mangorille 6 месяцев назад

Did you double check the SBUS Baud Fast setting between the goggles and betaflight? If you switch it on in the Betaflight CLI you need to do a save command before your update is saved.

@MachineNavFPV 6 месяцев назад

@@Mangorille Ya I validated both in goggles 2 and betaflight, I can see the controller connecting to the air unit but don't see any response in betaflight.

@Mangorille 6 месяцев назад

@@MachineNavFPV Binding to the air unit is only half the equation. Now you need to make sure that the signal is making it from the air unit to the flight controller and that Betaflight understands what it's receiving. What you are explaining sounds like a wiring issue or a Betaflight setup issue. I'd suggest turning off SBUS Baud Fast and seeing if that resolves your issue. You're not the first person to comment that they couldn't get the SBUS Baud Fast working (usually because of the incorrect command being used in the CLI or the save command not being entered).

@MachineNavFPV 6 месяцев назад

@@Mangorille So I got a prebuilt drone from rotor riot and I got it with an elrs module on there and when they set it up they never wired the air unit to the sbus wire. It was hard to figuring that out without taking the drone aprat, since they put the screws on so tight that I couldt take them off without stripping them. If the sbub wire is not connected can I still connect it to dji controller 2 by using the serial setting?

@Mangorille 6 месяцев назад

@@MachineNavFPV No, without the SBUS wire the air unit can't send the R/C signal to the flight controller so it will act exactly the way you described. You'll need to get that thing apart and rewired. The ELRS receiver is most likely wired to the SBUS as well so you'll need to remove that.