Wilderness Systems | Helix PD™ Pedal Drive Assembly and Installation 

Dude is the Bob Ross of kayak assembly!! Peaceful fella.

One of the best produced "how to" videos I've seen!

My first time Kayaking and this Kayak held strong. ru-vid.comUgkx4k5UrhC3v_Y4hIEaXLGvHcN5a5aBmZNB The water got pretty rough as a speed boat zipped by me, and the Kayak withstood it (I expected to be capsized). The Ores are very easy to put together, the pump worked beautifully. the seats are a bit hard to sit in after a while (I recommend sitting on the floor). after reading the reviews I was very scared it'd get a hole in it, the material is very strong and durable. The Air valve may need a small Phillips head screwdriver to adjust, other than that, it's well worth the money!(update)I've gone Kayaking in 3 Lakes and 2 rivers totaling about 40 miles. the kayak had two holes and they patched easily and no other problems can't wait for kayaking season this year!

Used this vid to do install on Radar115, thumbs up! Made assembly much easier than just reading instructions. Like smaller size of this drive compared to others on the market, easy transport. Swapped out pedals for aftermarket platform pedals with sealed bearings. Other than that, very happy with the Helix PD.

Top quality how to Video. Thank you.

October can't get here soon enough! looking to add this to my fleet of wildy kayaks!!!!

Excellent video ! Thanks very much!

Awesome video. Thanks for the help.

Thank you for the information, the video tutorial is very senior for pedals like I like it

This is the reason I purchased the Perception Pilot 12.0 Damn glad I did

Finally bought the Helix PD for my Radar! Too bad the kit was missing the cord locks to connect steering control to the rudder...Hoping to get the parts before next weekend.

Nice how to. My question is about the Helix PD storage when the OS Pod has a Fish Finder mounted on it. Is there a bracket to protect the Fish Finder head when the PD is pushed forward? I'd hate to crack the screen.

Thanks. Extremely well done. The rudder doesn't go up and down as easily as yours seems to! Can you it e oiled??

Can you mount a micro pole anchor to the rear if you have the rudder installed??

Awesome video and great step by step instructions. Cannot wait for mine to arrive. Are the cables for the rudder foot controls included with the Helix Pedal Drive?

Bought a radar 135 and it came installed with the helix drive and rudder already. Only issue I noticed is that the steering isn't straight, slightly askew with straight being at the 1 o'clock position. Tried to straighten the rudder control and adjust the rudder cables on the back end as the solution. Used the appropriate hex screw tool to loosen to adjust and spins in place, they seem to not loosen grip on the cables. Is there a trick to loosening those or as you warned, is it over tightened and that's the issue?

Should Blue threadlocker(Loctite) be used on assembly of screws

One of the videos I watched said the helix pedal drive came w the rudder system, true or false

hey, sir This video guide really help me to understand the concept! can I use your video Url in my blog post ?Thanks

Tq sir

Received Helix pedal drive today looks great,had a question about screw holes on latch hanger, holes are big and latch hanger moves around and looks like screws could pull thru over time. Thanks

Soooooo.... what do ya do when you want the steering handle on the right side? Since the internals aren’t meant to be switched.

the drive looks like the pilot drive, make sure the prop does not move in place, add those washers before selling the drive

Is that yak blue and green in color, and if so, how do i get it in that color?

Have one on order for my new Radar 135 but still have questions: 1) What are your sacrificial parts (ie. shear pin?) if unit sustains an at-speed impact from debris, oyster bed, sand bar etc.? A lot of leverage can be applied to hull and drive system otherwise... 2) Now that I've already mounted a battery and transducer to the forward pod I see that the pedal drive will interfere with the display head when stowed. Suggestions from the designers? P.S. love the boat! A+

So I bought the 115 and my question is, do you need to purchase and install the Rudder control tubes on a 115? I saw on a different wilderness systems video the installation of the tube.Does the 115 come with the tubes? Or do I have too install.

Hello sir. I bought the Atak wilderness 140. Is it possible to adapt this pedal?

Does this fit the ATAK 14foot ?

The description of the reverse threads is wrong. First of all, both of the cranks appeared to tighten by having the bolt turned clockwise, as a normal thread is, so either apparently is reverse threaded. The left pedal is indeed reverse threaded, which meant that the bolt needed to be rotated counter clockwise to tighten it, but the guy said he was turning it clockwise, even though he proceeded to turn it counter clockwise as he tightened it.

Anyone know how to run the rudder lines off the control to the rudder in the right side?

can this pedal drive go on a tamarack kayak as well

very nice, but unfortunately, it costs 4 times as much as my kayak, but if i could afford it i'd buy it and convert to electric.

Can I install this on my thrasher

Could this pedal system be installed the same on a wilderness systems ATAK?

Can you install this on the Ride 115x?

Is that Brent Mydland!?

yeah got my pedal drive for my 135 and it was missing the rudder block been waiting since april 3rd it is april 12th had the drive since the 2nd and cant use it smh.

Justin, the Helix PD™ Pedal Drive should be available by 3/15/2017, whoops, uhhh you couldn't afford it

中国有卖就好了 好想要买一个

Will this work on an ATAK 140?

Disadvantages of the design of the pedal drive: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-a-ckGYqGtNE.html I’ve used the R135 with PD since 2018. It’s been used in fresh water no more than 15 times in the past season, and then put in a kayak for winter storage in a dry garage. Preparing for the new season, I wanted to upgrade the pedal drive to increase speed by replacing the gears with the best gear ratio. So I screwed the pedal to get acquainted with the gears. I was surprised and unimpressed by the gearshift of the lower pedal gearbox. This gearbox is immersed in the water while in motion and is located immediately next to the screw. It turns out that the gears were flooded with water and as a result they rusted. Therefore, it is an obvious factory defect from the manufacturer - the joints of the elements of the case are not tight. Now it is understood that the design in this mission requires regular review of the subject for detection of leakage. Therefore, I recommend the owners of pedal driven kayaks, to be sure to check the condition of the lower gear, especially before prolonged storage of the boat after the end of the season. To disassemble this node is not difficult, even a child can deal with it. It is necessary to remove the cover by twisting only four screws. If you find rust, carefully remove it with special fluids, such as a solution of orthophosphoric acid. After that, I advise you to replace the rubber seals and add more lubricant to the gear.

Is the pedal drive available yet?

I am beyond frustrated right now. Trying to install the rudder kit, and the rivet nuts for the rudder lift cable guides were not installed properly. Then, whoever installed the keeper screws that come in the rivet nuts from the factory was apparently too slow to realize that the screws were only going in about 3/4 of a turn, and tightened them anyways, resulting in two of the rivet nuts having damaged threads. You'll be hearing from me Monday, Wilderness Systems. So much for trying out my new yak tomorrow. Part of me wants to blame the guy who installed the rivet nuts, but this is a quality control issue. Was he even trained properly? Does anybody go behind and check his work? This kind of quality control failure seems to be the norm these days.

Daniel Bryan is that you?

Too bad they don't tell you the PD drive may not come pre-greased!!! Mine didn't and started making lots of noise. Peddles squeaking too. If you get this system. grease the peddles and the drive system.

The manual says the left pedal has the score mark. Definitely wrong. I tried it until I watched this video. Both went on fine...

15:46 💀

I wish they made these for Hobie kayaks instead they have that stupid mirage drive.

I guess you are screwed if you want to add pedals and the kayak is not designed for drop in pedals?

Putting this together for me would be easy peasy, but for the price of the boat, NO ONE should have to assemble it.

You didn't tighten the crank bolts enough! They need to be TIGHT. If they ever loosen while pedaling the holes will get rounded out and then you will NEVER be able to tighten them so they don't move again. NEVER! I have had bikes loosen like that and i could never get them tight again. Ruins the crank and crank arms.

I turned it off when the first thing I read was you need a lighter and 10 other tools. Seriously?

One of the worst produced "how to" videos I've seen! NYAH NYAH hee heee