Тёмный

Will It Start Or Will I Burn This C10 Down? 

OK Speed Shop
Подписаться 3 тыс.
Просмотров 1,7 тыс.
50% 1

On this episode of Ok Speed Shop, I am BACK on the mossy blue 1980 C10 Cheyenne. (GM STARTER INSTALLATION)
If you remember, this is the #abandoned #squarebody that I pulled out of a field that has the #377stroker motor in it and the big cam. Ive been trying to get this thing to run right but have been distracted on the junkyard dog truck and other things but NOW IS THE TIME to get this ol girl back in the garage! Only problem is…..now she won’t start again… Let me just say, things get a little....SMOKY...
Watch an idiot try to figure out the problem HAHA
**IMPORTANT**
If you want to get connected and help me grow the channel by being a part of some members only conversations and early access to content, consider signing up to be a ShOp-DaWg!
My dog Bandit is always right there beside me in the shop and is the first to hear every idea and see the progess on what im working on.
To join the Shop Dawgs click JOIN above or this link here:
/ @okspeedshop
I now have new MERCH available!!!
THANKS FOR SUPPORTING THE CHANNEL!
okspeedshop.myshopify.com
Check us out on :
Insta/ @ok_speed_shop
/ okspeedshop
Email: theshadetreemechanic88@gmail.com
Send Me Junk:
PO BOX 825
Broken Bow, OK 74728
Also, one of my new favorite channels to watch is ‪@theempireofrust‬
Micah is a super cool dude doing some pretty awesome rescues and custom work! Tell him OK SPEED SHOP sent you!
Check you guys on the next one!!
#smallblock #classictruck #c10 #squarebody #hotrod #engineswap

Опубликовано:

 

23 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 118   
@ShadeTreeMechanic8962
@ShadeTreeMechanic8962 Месяц назад
He's like ill help u dad!
@okspeedshop
@okspeedshop Месяц назад
@@ShadeTreeMechanic8962 he’s a rascal 😂
@jayb.5017
@jayb.5017 Месяц назад
You should invest in one of those $50 10x10 canopy tents for if you can't get it in the shop. Saved me many a day when it's hotter than a fire ants nest in a flash flood. DEFINITELY put a new fusible link to the starter. Fires are no fun. Switch over to a clutch fan with a shroud. Timing is pretty far out, get that dialed in when you get the miss figured out and rockers set up. Taking on someone else's project can be a very daunting task. If it wasn't done right, you will be working on it constantly. But in the end, it will be worth it. You're going to have more fun than a steel beaked woodpecker in a petrified forest with that truck.
@okspeedshop
@okspeedshop Месяц назад
@@jayb.5017 hahaha I’m loving the analogies here dude 😂😂 And yes someone else mentioned the fusible link! I can’t believe I did that. I’ll be fixing that asap! I appreciate the helpful comment buddy
@Tannerrebuilds
@Tannerrebuilds Месяц назад
great video. im suprised that blinker bulb didnt burnt out yet 😂
@okspeedshop
@okspeedshop Месяц назад
@@Tannerrebuilds she’s trusty 😂😂
@WhiskeyDents
@WhiskeyDents Месяц назад
Master mechanic Matt
@TheCrackerBox
@TheCrackerBox Месяц назад
Thanks for another , Brother !
@ShadeTreeMechanic8962
@ShadeTreeMechanic8962 Месяц назад
Should b grounded to the block. Also check ur ground straps!
@okspeedshop
@okspeedshop Месяц назад
@@ShadeTreeMechanic8962 yeah I need to get behind the block and see what’s up with that
@user-ly5pv8tx7h
@user-ly5pv8tx7h Месяц назад
Get you a vortec starter from a V6 S10 that'll help you so much the mini starter
@okspeedshop
@okspeedshop Месяц назад
@@user-ly5pv8tx7h watch to the end 😉😉
@ClassicCarRevivals
@ClassicCarRevivals Месяц назад
That truck has a high stall converter in it.
@okspeedshop
@okspeedshop Месяц назад
@@ClassicCarRevivals yes 3500 stall. How could you tell?
@ClassicCarRevivals
@ClassicCarRevivals Месяц назад
@@okspeedshop by the size of the converter
@okspeedshop
@okspeedshop Месяц назад
@@ClassicCarRevivals oh I didn’t realize it would be physically bigger. Cool
@mattgoddard4085
@mattgoddard4085 Месяц назад
Awesome man! Love your grit and your grace haha! Both trucks sound great!
@okspeedshop
@okspeedshop Месяц назад
Thank you bro! How do you know Lance??
@mattrage1673
@mattrage1673 Месяц назад
i actually jumped when the starter fell... thought you were done for lol
@okspeedshop
@okspeedshop Месяц назад
@@mattrage1673 HAHA my life flashed before my eyes. I don’t know how I dodged it. That coulda left a mark 😂
@jamesjohnson8867
@jamesjohnson8867 Месяц назад
Way to see you keep trying. I've been there and it really takes patience to learn. You'll be fine just don't give up.
@okspeedshop
@okspeedshop Месяц назад
Thank you James! Didn’t grow up with a wrench in my hand like some but I am enjoying the learning process! I appreciate the support!
@Xthreadgarage
@Xthreadgarage Месяц назад
I’m 18 minutes in and I think your rebuilt starter is bad, mine would throw the drive gear out, but couldn’t turn the engine over. Was a brand new starter.
@okspeedshop
@okspeedshop Месяц назад
Yeah I think so too. Parts house didn’t agree but oh well
@BillyReed-yf5ni
@BillyReed-yf5ni Месяц назад
39 Happy Birthday
@okspeedshop
@okspeedshop Месяц назад
Thank ya sir. 36!
@2-STROKEFUN
@2-STROKEFUN Месяц назад
Happy Birthday!
@okspeedshop
@okspeedshop Месяц назад
@@2-STROKEFUN thanks amigo! How old am I?
@mikemech6236
@mikemech6236 24 дня назад
32:16 official PSI test 😂😂😂
@okspeedshop
@okspeedshop 24 дня назад
@@mikemech6236 😂😂 hey you know how I do
@daviddaniels6818
@daviddaniels6818 Месяц назад
That starter is for a 168 flexplate
@okspeedshop
@okspeedshop Месяц назад
@@daviddaniels6818 maybe wrong tooth count? Not sure but something was off for sure
@TurbochargedTactics
@TurbochargedTactics Месяц назад
And we are almost birthday twins?! 😂 Mine was June 22nd... I'm gonna say you're 36 now.. cas that would be even crazier 😂
@okspeedshop
@okspeedshop Месяц назад
@@TurbochargedTactics holy crap haha mine was the 20th and I turned 36. What’s up twin haha
@TurbochargedTactics
@TurbochargedTactics Месяц назад
@@okspeedshop let's gooooooo 😂😂😂
@ClassicCarRevivals
@ClassicCarRevivals Месяц назад
It’s my daughters bday also
@okspeedshop
@okspeedshop Месяц назад
@@ClassicCarRevivals oh cool HBD girl!
@ClassicCarRevivals
@ClassicCarRevivals Месяц назад
Howdy
@okspeedshop
@okspeedshop Месяц назад
@@ClassicCarRevivals what’s up pal?
@Xthreadgarage
@Xthreadgarage Месяц назад
I should have told you to confirm the length of the bolts you were buying because there’s 3 different length bolts available for small block Chevy starters. Oops.
@okspeedshop
@okspeedshop Месяц назад
THANKS A LOT STEVE 😂😂😂
@jamesjohnson8867
@jamesjohnson8867 Месяц назад
You should buy kobalt 24v power tools they have a great warranty and the power is comparable to the other brands and the price can't be matched.
@okspeedshop
@okspeedshop Месяц назад
I’ll have to check that out it thank you!
@Mountain_man71
@Mountain_man71 Месяц назад
32 happy birthday
@okspeedshop
@okspeedshop Месяц назад
Thank you for the compliment but I’m a little older 😂🥳
@TheCrackerBox
@TheCrackerBox Месяц назад
I would try to find a bigger steering wheel . Those little ones can be dangerous .
@okspeedshop
@okspeedshop Месяц назад
@@TheCrackerBox yes I hate that thing
@drjohnsonhungwell5115
@drjohnsonhungwell5115 Месяц назад
If you don't have the brace on the front of the starter that goes to the block that'll cause problems and can break the block too because the starter will turn from the torque
@okspeedshop
@okspeedshop Месяц назад
@@drjohnsonhungwell5115 hmmm I don’t know I’m familiar with that? What brace is it?
@drjohnsonhungwell5115
@drjohnsonhungwell5115 Месяц назад
​​@@okspeedshop If you look on the front of the starter there's a short threaded rod coming out and if you look up at the block there's a threaded hole in the block and the brace will keep it straight , O'Reilly's probably has it in the performance parts section but I know Summit racing would have it or the local junkyard .
@drjohnsonhungwell5115
@drjohnsonhungwell5115 Месяц назад
​@@okspeedshop The original 350 I had in my 78 K10 had the block broke because the brace was missing but the motor was already bad when I bought it so I just replaced it and I have a military k5 M1009 6.2 diesel that has a 24 volt starter that brace is a must have on that diesel they have 21to 1 compression .
@drjohnsonhungwell5115
@drjohnsonhungwell5115 Месяц назад
​@@okspeedshop Those knurled bolts do help too
@okspeedshop
@okspeedshop Месяц назад
Good to know! I’m going to look into this! Thank you!
@ClassicCarRevivals
@ClassicCarRevivals Месяц назад
Are your starter wires touching when you dropped it?
@okspeedshop
@okspeedshop Месяц назад
@@ClassicCarRevivals I think I decapitated one 😂 plus wasn’t making a good ground connection on the main ground. It was in an ok spot but maybe some rust and definitely not tight enough on either end. All the voltage kept going through the small wire and frying it.
@ClassicCarRevivals
@ClassicCarRevivals Месяц назад
@@okspeedshop that will happen if starter isn’t tight enough!
@ClassicCarRevivals
@ClassicCarRevivals Месяц назад
I think that 2 into 1 is a fusable link
@okspeedshop
@okspeedshop Месяц назад
@@ClassicCarRevivals oh woops so I need to put a fuse back in?
@ClassicCarRevivals
@ClassicCarRevivals Месяц назад
@@okspeedshop if starter sticks it can burn truck up!
@okspeedshop
@okspeedshop Месяц назад
@@ClassicCarRevivals ok good to know, I wish I remembered which wires it was, I guess I can fuse them all in that bundle
@ClassicCarRevivals
@ClassicCarRevivals Месяц назад
@@okspeedshop you do have video proof of which ones haha! You could also copy red trucks wires
@okspeedshop
@okspeedshop Месяц назад
@@ClassicCarRevivals it just seem like two out of the three were fused and I wasn’t sure which two but I bet I could figure it out! I’m just glad she’s out of the Rocks now! 😆
@Tannerrebuilds
@Tannerrebuilds Месяц назад
happy birthday 36?
@okspeedshop
@okspeedshop Месяц назад
@@Tannerrebuilds nailed it!!! I owe you a shout out
@daviddaniels6818
@daviddaniels6818 Месяц назад
you need a starter for a small block before 1986
@okspeedshop
@okspeedshop Месяц назад
@@daviddaniels6818 you think it was wrong one?
@daviddaniels6818
@daviddaniels6818 Месяц назад
@@okspeedshop I know it's the wrong one unless you put a 168 tooth flywheel your cylinder heads are not center bolt heads
@okspeedshop
@okspeedshop Месяц назад
@@daviddaniels6818 oh is that the way to tell without counting? Good to know!
@daviddaniels6818
@daviddaniels6818 Месяц назад
@@okspeedshop yes you'll also need the correct starter bolts there's a tapered section on the bolt right below the threads that help align the starter
@okspeedshop
@okspeedshop Месяц назад
@@daviddaniels6818 thanks a million bro!
@TurbochargedTactics
@TurbochargedTactics Месяц назад
It's alllllliiiiiiiiivvvvvvvveeeeeeeee 😈
@okspeedshop
@okspeedshop Месяц назад
@@TurbochargedTactics yeah buddy!!!! Alls well that ends well haha
@TurbochargedTactics
@TurbochargedTactics Месяц назад
@@okspeedshop bingo 😎👉👉
@howardhall67
@howardhall67 Месяц назад
37
@okspeedshop
@okspeedshop Месяц назад
@@howardhall67 close!!! 36 🥳
@W.A.R.R.
@W.A.R.R. Месяц назад
Still sounds like it’s too far advanced. That’s why when the starter did actually start working, it would randomly stop spinning the engine and then start spinning again.
@okspeedshop
@okspeedshop Месяц назад
Awesome so to retard it I spin it clock wise?
@ShadeTreeMechanic8962
@ShadeTreeMechanic8962 Месяц назад
28
@okspeedshop
@okspeedshop Месяц назад
@@ShadeTreeMechanic8962 I appreciate that compliment homie 😂 36 big ones.
@user-ly5pv8tx7h
@user-ly5pv8tx7h Месяц назад
Can I get a 87 mini starter to
@okspeedshop
@okspeedshop Месяц назад
@@user-ly5pv8tx7h I don’t know about that. Probably
@1776_Garage
@1776_Garage Месяц назад
You almost got made special by that starter.
@okspeedshop
@okspeedshop Месяц назад
@@1776_Garage HAHAHA YEP
@natebutash1913
@natebutash1913 Месяц назад
You have a major exhaust leak. Headers gaskets.
@okspeedshop
@okspeedshop Месяц назад
@@natebutash1913 yes I stripped a headed bolt out…gotta put a helicoil in it one day 😭
@natebutash1913
@natebutash1913 Месяц назад
A lot of times a header leak will sound like a lifter clapping it’s really hard to tell the difference.
@okspeedshop
@okspeedshop Месяц назад
@@natebutash1913 yes much rather a header leak haha. I’m about to pop the valve covers and get them all adjusted for a solid lifter cam shaft in the next video
@natebutash1913
@natebutash1913 Месяц назад
@@okspeedshop Nice I like your Videos I have a third gen Camaro that I’m building. I have been through all the stuff you are learning about. I had a lot of mistakes learning about small blocks and learned a lot about them and what not to do.
@okspeedshop
@okspeedshop Месяц назад
@natebutash1913 that’s encouraging. I’m new to everything so just learning through trial and error and documenting the process. It’s a blast and you guys are all such a great and helpful community.
@ClassicCarRevivals
@ClassicCarRevivals Месяц назад
If I had to guess your around 35
@okspeedshop
@okspeedshop Месяц назад
@@ClassicCarRevivals super close! I just turned 36
@user-sw2wm3ni3j
@user-sw2wm3ni3j Месяц назад
Change starter
@okspeedshop
@okspeedshop Месяц назад
Yep
@57bugman
@57bugman Месяц назад
You really need to stop letting that smoke out, it’s real hard tand expensive to put back in
@okspeedshop
@okspeedshop Месяц назад
Haha! That’s what I’m figuring out. I’m trying to stop doing it.
@ShadeTreeMechanic8962
@ShadeTreeMechanic8962 Месяц назад
Get a new starter!
@okspeedshop
@okspeedshop Месяц назад
@@ShadeTreeMechanic8962 bingo. Hated to spend the money but it was necessary
@1776_Garage
@1776_Garage Месяц назад
If that impact is from harbor freight then it's most likely chinese garbage.
@okspeedshop
@okspeedshop Месяц назад
Wally World. Junk. Just got a new one now thanks to a subscriber gift!
@1776_Garage
@1776_Garage Месяц назад
@@okspeedshop cool
@Donblgoodrimes
@Donblgoodrimes Месяц назад
Sounds like to much timing
@okspeedshop
@okspeedshop Месяц назад
Alight, thank you, next video I’m going to really give it a good tuning. Please stay tuned to help me figure out how to get it running right!
@1776_Garage
@1776_Garage Месяц назад
Howdy
@okspeedshop
@okspeedshop Месяц назад
@@1776_Garage what’s up man!
@1776_Garage
@1776_Garage Месяц назад
@@okspeedshop Staying out of the heat and trying to work on the Benz at the same time. Lol
@user-sw2wm3ni3j
@user-sw2wm3ni3j Месяц назад
31
@okspeedshop
@okspeedshop Месяц назад
@@user-sw2wm3ni3j ohh close. 36 🤙🏼🎉
Далее
Too Clean For The Scrapyard But What Is She Hiding?
33:14
СМОТРИМ YOUTUBE В МАЙНКРАФТЕ
00:34
Просмотров 1,4 млн
Идея под заказ😂
00:20
Просмотров 168 тыс.
I messed up BAD this time! - 1986 Chevy C10 PART 2
27:29
I bought my neighbor a car and he got MAD 😡
28:48
Просмотров 2,3 млн
"Will It Run" The Movie (A Truly INSANE Vehicle Revival)
2:29:55
Fixing Up An Old Chevy C10
1:04:32
Просмотров 110 тыс.
СМОТРИМ YOUTUBE В МАЙНКРАФТЕ
00:34
Просмотров 1,4 млн