Winch Install on a 2022 Toyota Tundra TRD Pro...Zeak 13k Platinum Winch!...Wireless Remote Included

Подписаться 18 тыс.

Просмотров 33 тыс.

50% 1

how to install the Zeak 13,000 lb Platinum Winch on a 2022 Tundra...wireless/wired remote, disconnect switch included...much easier than I thought!
Zeak 13k Platinum Winch- amzn.to/3kIjHzg (see below if sold out)
Alternate Zeak 13k Winch- amzn.to/3Drjw1Y
Zeak 12k Winch- amzn.to/3XMYPpi
Zeak 10k Winch- amzn.to/3wJ4P6w
2 AWG Wire- amzn.to/3JeeXvF
2 gauge butt connectors- amzn.to/3Ja491t
Heavy Duty Wire Crimper- amzn.to/3kF9pAf
Wire Loom- amzn.to/3DcoO18
Channel Partners/Discount Codes
xtrusion-overland.com/ Code- NitroZ18
LASFIT lddy.no/qnhl Code- JUDGE10
ESP Truck Accessories- www.esptruck.com/NITROZ18FISHING
Discount Code- NitroZ18Fishing
carlinkitcarplay.com Code- Z18
carpuride.com/?ref=Z18 Code- Z18
screenprotech.com/NitroZ18Fis... Code- Z18
www.tufskinz.com/ Code- Nitro10
cupgrip.com/?ref=Z18
Ultimate9 Throttle Controller- bit.ly/NZ18-evcX Code- NITROZ18
www.setpowerusa.com/ Code- NitroZ18Fishing
Cobra RAD 700i Radar Detector- shrsl.com/4g29d
blackbeardfire.com/IFISH2248 Code- IFISH2248
www.YOLOtek.com/?rfsn=2358729... Code- NitroZ18
billettiedowns.com/ Code- NitroZ18
www.shinearmor.com/ Code- Judge20
versatrax.com/ Code- NitroZ18Fishing
coverado.com/?ref=JUDGE10 Code- JUDGE10

Опубликовано:

23 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 69

@moez1774 Месяц назад

I cannot believe how detailed this video is! You have good video editing skills. Amazing!

@NitroZ18Fishing Месяц назад

Thanks man, I appreciate that!!

@stevefoltz3838 Год назад

Love your channel. I am not quite this confodent to tackle your projects but its fun to watch.

@NitroZ18Fishing Год назад

Thanks man, I appreciate the support!… If I can ever help with anything just say the word!

@carlosq1177 Год назад

Love your videos brotha. Don't own my own tundra yet but one day I will and will come back to your videos for guidance. Love your truck. 💪🏽👌🏼👊🏽

@NitroZ18Fishing Год назад

Thanks man, I appreciate that!!...let me know if I can ever help with anything!

@IndependenceOverland 6 месяцев назад

Hey man, I am curious now that this has been on your truck a while how the hybrid system handles it? When winching, do you experience the blower fans slowing down or any lights dimming? I would assume the hybrid motor system/battery is more than capable of producing the high amperage required for a 12v winching setup, but Toyota must have limited it to some extent. With a winch sometimes having up to a 500amp draw under maximum load, I am very curious how the truck handles it. Thank you!

@g2theb584 Год назад

Well happy birthday man! I too will be 42 in April this year and luckily no senior moments........yet 😆. Winch is a nice accessory to have and finishes off that new bumper nicely.

@NitroZ18Fishing Год назад

Hahaha...thanks buddy!...I appreciate it!...and unfortunately I have more than I'd like to admit! 🤣

@benmac1395 Год назад

Awesome video. I have the covert bumper on my SR5 TRD Off-road and I really liked it. I’m switching it out for an SSO slimline front bumper because I keep hitting the plastic on both sides of the covert bumper. You’ve sold me on the Zeak! Keep the videos coming. They’re great.

@NitroZ18Fishing Год назад

Thanks man, I appreciate it!!...definitely recommend this Zeak, I've used it a couple times now and it's a beast!

@gerrybaker1422 Год назад

You keep hitting the plastic? What do you mean? Pulling into places you bump the front?

@HayNakuDiba Год назад

As always, great video! You are sooo descriptive and informative when you give tutorials! Question - if I don't have the Hybrid Tundra, do I just connect the winch terminals to the regular battery in the engine bay?

@NitroZ18Fishing Год назад

Thanks man, I appreciate it!...yes sir, just direct to battery in engine bay!

@HayNakuDiba Год назад

@@NitroZ18Fishing thanks boss man! Looking forward to your next video!

@moundman16 16 дней назад

Great job. I'm expecting my Tacoma Trailhunter next month and was wondering how to do this. Hopefully it'll be about the same for them.

@r32gtr10 Год назад

Great work as always man! Always look forward to your videos. I did hear something about the active aero no longer working after installing the CBI bumper. Is this true? Thank you sir

@NitroZ18Fishing Год назад

Thanks man, I appreciate it!...and that's correct, I believe they make a kit to work around it if I'm not mistaken...thankfully the Pro doesn't have it so I didn't have to worry about it...let me know if I can help at all!

@johnmeeboer6044 Год назад

Maybe Toyota did it right by no tow hooks. This way the after market business gets business and it would be better than any auto brand can make.

@kenmorgan316 Год назад

Nope, they are not that smart 😀

@NitroZ18Fishing Год назад

As disappointing as it was to not have em, I couldn't be happier with this setup I'm runnin now!

@bigkevo4x4 6 месяцев назад

Haha lame I hate not having tow hooks in the front in the tundra smh 🤦🏻‍♂️

@iggysworldvideos Год назад

Wow what a good walk through very much specific thanks man for this.

@NitroZ18Fishing Год назад

Thanks man, I appreciate that!...happy to help!

@luny_mrg8868 Год назад

Since your disconnect switch is so far away from the battery I recommend adding an inline fuse near the battery as any wire between the switch and battery is “hot”. Also you could of use any ground location in the engine bay or even frame where the bumper attaches instead of running them all the way to the battery.

@NitroZ18Fishing Год назад

Not a bad idea with the fuse, I actually thought it was weird it didn't come with one!...may be a stupid question, but would grounding it like that be ok with the winch???...I've grounded other accessories like you mentioned but I've never seen anyone ground a winch like that...and the instructions specifically say to connect both positive and negative directly to battery...thanks man!

@luny_mrg8868 Год назад

@@NitroZ18Fishing I believe those instructions are like that to ensure a complete circuit as alot of applications use an independent battery that are not grounded to the frame IE on trailers. Since your battery is already grounded to the frame, grounding the winch to the frame would complete the circuit. Just ensure it’s a clean connection and not covered with paint.

@markgraybill4260 9 месяцев назад

Amazing - thanks for sharing! It looks like you had to remove the air shutter to fit the winch - how did you get by the error codes / check engine light?

@NitroZ18Fishing 7 месяцев назад

Thanks man, I appreciate it!…no error codes at all, working flawlessly!

@SHOOT_NDX Год назад

That looks very,very similar to a BADLANDS 12k

@NitroZ18Fishing 7 месяцев назад

Basically similar product, rebranded

@mohammadalavai8220 4 месяца назад

Brilliant instruction, obviously your Tundra is still under manufacturing warranty. I wonder how your warranty is affected since you put this winch on your own? Was there any manufacturing recommendatons? specifications?

@user-jn1ti6wo4d Год назад

I finished my install and was able to clock the winch (RUGCEL 13.5K) which aloud me to use the lower grill support bracket. Where did you purchase the battery cable extensions?????

@boxingcorn 7 месяцев назад

Dude, it's time to open your own shop so I can bring by truck for you to work on!

@NitroZ18Fishing 7 месяцев назад

Man I would love to!…I’ve actually had a few viewers ask if they can come to me, but they were a little too far away to make it work…I thoroughly enjoy working on these trucks, I’m not against helping any of my viewers out if the timing/location works!…if I can help, let me know!

@101Saia 4 месяца назад

Just out of curiosity how did you connect the wires to the batterie? My batterie has a quick connect on the negative terminal and the batterie slots seem to be completely full I thought about getting a splitter or getting some vampire connectors to attach to the existing wirers. I plan on running 1/0 to a buss bar I'm going to install in the engine bay.

@doctimw 27 дней назад

Where did you purchase the "Flatlink" ? Did it come from Zeak or Great America Shakles?

@mictuning Год назад

would you like to review some free wheel lights

@NitroZ18Fishing Год назад

Send me an email and we can talk!...my channel email is nitroz18fishing at gmail...thanks!

@mohammadalavai8220 4 месяца назад

Can it be installed if the truck is equipped with a front spoiler?

@ab872009 11 месяцев назад

How has the winch been pulling lately? Smittybilt and an Engineer at Baja Designs told me to swap the stock wiring for 0g since we’re extending the run on a 12k. I’m wondering how necessary it is?

@NitroZ18Fishing 7 месяцев назад

No issues at all, works great!…I’ve only used it a handful of times but it has worked flawlessly

@doctimw 18 дней назад

Where did you remount your license plate?

@fafo-faroundandfindout1752 Год назад

How did you retain the TRD skid plate? Did you run a lift?

@NitroZ18Fishing Год назад

No lift as of right now, I'm still on the factory TRD Pro suspension… No problems fitting the skid plate at all, no modifications needed… Hope that helps!

@LilTaco777 Год назад

You’re lucky you got that color

@NitroZ18Fishing Год назад

Absolutely, I'm shocked they took it away from the 2023 Pro!

@doctimw 27 дней назад

Nevermind my question below....I found the flatline is a product made by Factor 55.

@kbussche Год назад

The front active spoiler needs to be removed with this bumper right?

@NitroZ18Fishing Год назад

I believe so, I know they make a kit to delete the air damn...the Pro doesn't come with that so I didn't have to worry about it but I know the front air damn is not compatible with the bumper...hope that helps!

@simarsandhu461 Год назад

whats the mpg with 35s

@danh.461 Год назад

I just purchased mine thanks for all the instructions did you end up using all 25' of 2 awg wire? looking forward to own adventure installing it, Thanks!!

@NitroZ18Fishing Год назад

Hey Dan!...so I ended up using about 15' of wiring to make sure it wasn't pulled super tight anywhere and had plenty of "wiggle room"...I should have mentioned that in the video, I'm sorry!...thanks for watching, if ya need anything let me know!

@danh.461 Год назад

@@NitroZ18Fishing Thanks yeah 15', that's a huge savings on price too. I did look around about grounded to the frame and it's not recommended, will cause the winch to run too hot and could possibly damage other electronics.

@NitroZ18Fishing Год назад

Yea I dont think I've ever seen a winch grounded to anything but direct to battery...the peace of mind is worth it for me!...let me know how your install goes!

@3charliewright Год назад

I can’t Find any ZEAK winch online ? How’s the customer support?

@NitroZ18Fishing Год назад

Not sure about support, I haven't had any problems yet! (Thankfully)...but these sell out almost instantly...if I see em in stock on Amazon I'll let ya know, but keep an eye out!...they're sold out a lot of the time!

@3charliewright Год назад

@@NitroZ18Fishing I’ll keep trying - the reviews on the ZEAK winch are outstanding. I have time as I don’t have my CBI front bumper yet. I plan to go to Idaho Falls in person to check it out. We have a second home in Sun Valley ID…. I just got my Colorado seat covers and 22” amber light bar. Unfortunately I missed out on your recommendation on the floor mats by a week as I ordered the Husky two weeks ago. I now have notifications turned on 👍

@NitroZ18Fishing Год назад

That's awesome, thanks for all the support!...this winch is definitely a steal, can't beat it at the price point...just as good as some twice the cost!...hopefully you'll get your hands on one, every time I've looked recently they're sold out again...let me know how ya make out!

@r32gtr10 Год назад

What flatlink did you go with?

@NitroZ18Fishing Год назад

Factor 55 Flatlink E....definitely nicer than the original, it has a bigger opening allowing for more ways to link up! amzn.to/3Z96Fu2

@r32gtr10 Год назад

@@NitroZ18Fishing Thank you very much!

@NitroZ18Fishing Год назад

No prob!