Alright buddy I just subscribed. Thank you for doing it tutorial and not just doing the project with music playing and no instruction. You have a whole new fan
Another question My spider comes out with not enough covering at the read end. Do I have to start loading the wire at the very tip of the 12 guage wire? Hope you understand this. Thank you
Yes it willl help if the first wire you load is as close together as possible another option is to add more wire when you finish the spider like filling the gap if that makes sense you don’t have to do anything with that wire except filling the gap that looks empty
I dont know what happens to my comments but they dissappear at times. My question is the back legs are way longer than front before trimming to 4.5 inches. I am wasting a lot of wire or I am doing something wrong. Please advise. Thank you.
No you are not doing anything wrong the reason why is because the wire that make the back legs don’t get use as much as the one for the front legs , meaning they don’t get to be woven as much as the other , that’s perfectly normal If you want to not waste that much wire cut four of the wires shorter than 2 feet but you will have to make sure that they end up on the back which is a little difficult but is doable Another thing is that you can keep the scraps for further projects and don’t throw them away if you want to save money Does that makes sense ? Let me know if you have more questions thank you
@@angelsculptures1478 Yes that helps me to know. Yes I save scraps even pieces that are still ok from when I mess up entirely. Funny. You should see my macrome mess up box of scraps. Thank you. Short pieces can be used for "knuckes" on the mantis legs also.
The 18 gauge is to soft to withstand the pressure of the wires I would recommend to use anything that is thicker than a 18 gauge it could be 15 gauge or even some wire that is not aluminum sometimes you could get tin wire from stores like Lowe’s Tin is much more dense and harder than aluminum even if is not 12 gauge and even if is not the same color
@@angelsculptures1478 i appreciate you replying and taking your time to answer my question but i ended up scrolling to you channel and saw the centipide tutorial and i had the materials for it so i decided to do it and i now finished and turned out pretty good thank you!😁
