Hello and welcome to my latest tutorial.
To make this pendant you will need -
• 0.8mm wire (20g), 2 x 12" (30cm)
• 0.315mm weaving wire (28g) 150cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer)
• cabochon, mine is 30mm by 10mm (you can use a different size, just remember to adjust wire length and weave repeats accordingly)
• Jump ring, 8mm outside measurement (or whatever size you have handy)
I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Prestige flat-nose nylon jaw pliers
• Beadsmith bail pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)
My Etsy shop - www.kellyjones...
Facebook - / kellyjjewellery
IG - kellyjjewellery
Thanks for watching x
Music is free from RU-vid;
Invisible Beauty - Aakask Gandhi
©2023 Kelly Jones Jewellery All Rights Reserved
Please do not copy or share this content!
This content is created for me (Kelly Jones Jewellery) to promote my tutorials.
Do not share or reproduce this content in any format.
Thank you!
18 сен 2024
