Hello and welcome to my latest tutorial.
To make this pendant you will need -
1.2mm (16awg) wire for the jump ring or anything that kind of size.
• 0.8mm wire (20g), 3 x 8" (20cm).
• 0.315mm weaving wire (28g) approx. 100cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer).
• cabochon, mine is 18mm by 13mm (you can use a different size, just remember to adjust wire length and weave repeats accordingly).
• 4mm bead.
• Tripple jump ring, 8mm outside measurement (or whatever you have handy)
I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)
My Etsy shop - www.etsy.com/u...
Facebook - / kellyjjewellery
IG - kellyjjewellery
Thanks for watching x
Music is free from youtube;
Invisible Beauty - Aakask Gandhi
©2023 Kelly Jones Jewellery All Rights Reserved
Please do not copy or share this content!
This content is created for me (Kelly Jones Jewellery) as a means to promote my tutorials.
Do not share or reproduce this content in any format.
Thank you!
11 сен 2024
