Wireless Android Auto on Honda NT1100 via Ottocast A2Air Pro 

You're welcome

At the time, it was the best device we could find, and a year later, it is still going strong. Technology will always advance. I've seen, but not tested, similar units that are now 2cms square and have a rubber-style cover. These blend in well and are hardly noticeable. Others run a long USB cable and put the A2Air Pro under the seat. Find one that meets your needs, safe in the knowledge that a year from now, there will be an alternative to consider 🙂 Perhaps Honda will include the wireless version as standard. I hope that explains why.

@@fliesonthevisor Thanks, that's really helpful. I wish I had the tech knowledge to make a value judgement on the smaller, 2cm square, devices. I shall ponder for a bit longer. Thanks again for your help.

Surprising. It works on Bluetooth, wouldn't have thought WiFi would be an issue, but good spot if that is the case

@fliesonthevisor I agree. Wi-fi shouldn't come into it. I'll try turning the wi-fi off and see if it makes any difference. Then I'll try another phone which I know supports 5 gig. Out of interest where did you stash the Ottocast unit. I'm thinking up under the fairing below the displays....

I didn't as it wasn't my bike (Honda Press Bike) so I stuck it to the fairing and removed it when the bike went back

Hello - If I'm reading the question correctly, I think you are suffering from the "Who's in charge" problem. With your phone and bike connected to the headset, they are arguing for control. Try connecting the phone to just the bike, and the headset to the just bike and delete all other pairings. The music then plays from the phone, through Android Auto to the headset. Let me know how it goes.

The best solution I've seen was to run a long USB lead so the Ottocast A2Air Pro could be installed under the seat. This means that only an inch of the cable is visible before it runs behind the "Tupperware"

@@fliesonthevisor Thanks for that, sounds like a good option and keeps it dry as well 👍

It was a cable I had in a box, so I can't be sure. I think it was made by UGREEN. If you search UGREEN USB on Amazon, you should find them. Get the high-quality high throughput cables. All of that said I can't be sure. Hope that helps.

Thanks, I'll try!

The Pro is faster.

You are my saviour 🙌, I have had my NT1100 for nearly a year now and from day 1 had issues with connection via cable and eventually used an Anker cable which solved it, or so I thought. It still faulted sometimes so I went to my Honda dealer who also tried but failed. So, like you, I thought I'd try wireless option, connected it all up but still had issues, temperamental I'd call it. Time and time again I would uninstall everything and keep trying, but failing 😔 . Then, I saw your video, and followed your instructions and from then on it connects 1st time everytime! The only thing different that you point out at the very beginning is, YOU MUST CONNECT HELMET TO BIKE FIRST, after that you connect your phone and hey presto it works. So, if anyone else who has connection issues follows your instructions then happy days, they'll have no issues. Thanks again 👏