I got no help from the seller. I almost retuned it as defective until I came across this video. I bought this exact kit and with my household maintenance and installing experience, I was baffled by the instructions booklet. Thanks for this.
Thank you! Do you get any false alarms with these motion sensors? In an effort to avoid false alarms, I am planning on buying this same system but with different motion sensors with Dual PIR + Microwave MW, from a different manufacturer, will any/most sensors work with this system. If you an affiliated link I’ll buy from it.
Great video. Iv just bought this system... BUT.. Where did you fit main unit cause its not properly secured to wall so intruder can easily clip it of wall..
Do you need to insert the sim card pin? I have the sim card from the portuguese operator MEO, and the indication of the activated network does not appear
Hi, thank's great video. I have 2 problems: 1) My battery is out of order and it is impossible to find a spare on the market and 2) 2) Controlling the alarm (SIRENON, ALARMON, etc.) via the smartphone does not work. The alarm beeps but does not send back a confirmation sms. Do you have an opinion?
Hello, Can you tell me how to programmed one wireless door sensor to sound when the door opens please ? Whilst the alarm is not activated ? just as a door opening warning ? please
Hello , first of all thank you for the top video!The installation of the sim card does not work for me. Must the card on the post (Germany)be activated?
Hello, in the description of the video you mention programming the alarm. So how do you program the alarm? The alarm is sold in several languages, so distributors have to program it for the local language. I have been able to successfully modify the audio messages, but not the SMS yet. In addition, the main CPU sends SMS to the GSM modem in PDU mode. Can you advise how to modify SMS messages? Thank's.
Having a little difficulty programming the GSM alarm for delayed entry. I have a wireless detector coded as zone No. 3, but the commands to make it delay are not working. Do you know what I might be doing wrong?
Hi, I have purchased the alarm in this video. I would need to connect 2 sirens of 75 ohm. I wanted to ask you where I need to connect. I tried in the last two as explained in the video but it does not work. What do I need to add in order to make them sound? Could you please help me?
This unit accept 10 sec voice recording. Do you know under which condition this voice recording is heard after host sounds alarm? When the unit call the preset numbers does not announce the voice recording message.
I am having real problems wiring in a pir to zone 1, i have easily set the zone ative in the menu but will not trigger alarm, pir can be seen lighting up when motion but no alarm trigger. Have tamper on pir to zone 1 & cc to com on panel (have also tried to ground) can you help?
i just bought one and i need help because one of the sensor is not working. when i lock it and i walk in room it just goes beep beep beep and nothing happends. The other 2 the alarm goes off but thats only because i set it at 23 then a random number 09 and pressed hash key so it must be set up with right zone. But i cant set this last one to that zone because I cant delete it cos i dont no what number it is set at. What can i do help me ?
Hi great video- how do you get the wireless door sensor to trigger and count down for 15s with out all the pir’s also counting down for 15s can seem to get pir’s to alarm instantly and door wireless sensor to allow 15s entry time cheers
Old thread, many questions. I have got this alarm and want to emphasize two things: 1 - As far as I understand, this alarm uses 2G and needs an old type of SIM-card, which may not be available any more. In Sweden, none of the mobile providers have these old cards anymore, hence making the GSM part of the alarm useless. 2 - There is no function for a PIN-coded reset when an alarm is triggered. Which means that anyone can just reset (and quiet) the alarm just by pressing the "unarm" button. The solution is to mount the main unit for example in a locked area. And use the provided remote control for resetting. (Which means the main unit can't be too hidden anyway.) Two important shortcomings, which made the alarm much less usable.
Hi i have a 4 wire fire detector To connect with this alarm, should i do the settings of the fire detector on nc or no? I got it to work but after I installed the wired pir sensor the fire stopped reacting and when pir is triggered the is no soumd coming out of the siren it just send mag and call. Thanks
hi i have a opexia op-g99 alarm system but i misplaced the manual and now i am unable to set the system ..do you have a tutorial that is able to assist me setting this alarm thanks
Hi I have lost my gsm manual since I got them 3 years ago..I have kept it since as I do not have the manual to set it up ..I have tried to follow yours to set them but it seems have a different codes and programs..what can I do to obtain a manual or some kind of help to set it up..thanks
Please have a look at the new inprover system here on youtube, it will actually indicate to outsiders whether someones in the property when the alarm is sounding !
Would you be able to make an instruction video on how to connect a PIR motion detector with the main host? If this isn't possible then could you message me some instructions. Thanks.
Does anyone know how to get a SIM card for this system? I ordered it from Walmart and am needing one ASAP as I am moving and I need it for my new place
Hi, is there any way of shortening the alarm on this? I'm using it as a driveway monitor, but I dont want the siren to go off for 3 minutes each team. Can I set it to ring for only 10 seconds? Alternatively is there anyway of pairing a wireless doorbell to this as the siren?
hi i'm trying to figure out how to set up the time but ive tried everything all the numbers for Ect. 33.34.35 and nothing so please get back to me on this
All my IR sensors have been set to detector alarm type 3 which is supposed to not go off in home but only out arm. Yet they set off the alarm even when it is not armed. Do you know why that may be please?
Nice video... But,Mine must be a slightly different version to the one in the video,Got all the sensors working but the magnetic contacts (That are already wired up ) wont work,Tried a factory reset but still no good. It's like they are disabled,Any ideas
Rye Cooder Rye Cooder I tried setting the siren but siren won't switch off armed or unarmed. I'm feeding the black wire into ground connection and red wire into 9v Things to note I don't have a SIM card in Could that be the reason or I'm connecting it wrong?
Good day Is there anyone who will be able to assist in how to connect an LED to the system so we will be able to see from the outside when it is armed.
I have exactly the same model. When is armed and i trigger an sesnor, the alarm is starting and send sms and call but no siren alarm not even on wired siren. Can you help me please? Thank you.
hi you can add my whatspp +8617612778257 or check the link then will help you www.aliexpress.com/store/product/Home-Security-Alarm-systems-Metal-Remote-Control-Voice-Prompt-Wireless-Door-sensor-LCD-Display-Wired-Siren/910381_32952613601.html?albbt=1&isdl=y&aff_short_key=uNb6i2f&aff_platform=true&albslr=201206798&src=RU-vid
how to setup panic button using this keypad, the problem is punic buttom must keep active, but in this model panic button only work when arm, pls someone help
So, by default, the burglar has 40 seconds to locate the host by its sound and press the disarm button. I he manages to do that, the owner won't be notified about the intrusion.
Thanks...question... ..my unit came without batteries and I need to determine what size battery to use in the remotes. Do you know what battery works in the remote?
Hi igsI got a new sim card and tryed it in my mobile first to make sure it works and it does with sms/calls the machine was powered off before I put sim in tryed to call the machine but nothing is happening there isn't any pin code on simthanks dave
Hi.when you put new sim in the phone did that sim had a access code or phone start up straight away and you where able to use it ? if there was a access code then you have to set up in the phone security to take that code off Also to reset the system to factory settings you should find in the manual long digit code ,just read manual better .i am away for the week so can't send the code I have any it could be different.
Hi igs20101, I have been using the same (basically) system for a good while now but there is one function setting I just don't understand the use of it. In my book its #20-Host Timing Function Setting, 2 options, 0-close all timing arm/disarm function, or 1-open all timing arm/disarm function. Maybe its the way its worded but I don't understand what it does lol! In setup state its 41 for mine, I have never set it either way, everything functions as it should but it bugs me that it has me clueless. You seem to know a good bit, any ideas, anyone? I just want to know its function, thanks.
Hi, The Host Timing Setting allows the alarm to arm and disarm itself at a certain times each day. In setup 42hhmmhhmm# sets the two times (disarm, then arm time). 411# then enables the timed function. 410# disables it. Hope this helps.
I see, so yours like mine has separate inputs. Setting arm/disarm times is the step below the input that switches those times on or off. Mine must default to on, I have never changed it but my timers work once set, that would also explain why I never changed it but my timers work. Thanks a lot, I appreciate it.
Hi I had to put a new sim in as my last one deactivated. The new one is showing no signal and I have lost my master password and manual. Any idea how to fix it?
Very good video...I wonder can you tell me if you can adjust the length of time the alarm sounds if triggered....so it won't be sounding for hours if I am not at home....and driving my neighbors crazy.
The system is designed to alarm and intimate you. You have to set the alarm off it goes off. The WiFi model, you can control via app, same as the GSM model.
Hi.in my panel ,and as far as I came a cross few of them I found that all wired zones on the back are already numbered.and depending on your alarm full spec wired zones start like from 93 for zone 1,then 94 as zone 2 and so on fallowing from your manual of the wired zones .so after you installed 22 wireless zones and adding one wired ,than that zone will be zone93 and you have to program that zone 93 for whatever function that zone will be.like front door or back door and I have to program it as access zone 93..hope that was helpful.
instruction command is 47 so therefore it should be 6666# 47 xx # - xx being your sensor number, depending on system that will be 01 to 07 or 08 Hopefully this will work, it does on mine. This of course depends on your system.
this Parnell have option to turn voice of inside when u do any work or if you want some commands been voiced .Oslo that inside ringing option useful to set up to go of if someone broken in to the house .you just have to play with voice settings and see what would u keep it
Am I being stupid but what’s stopping a robber breaking into my house and just hitting the unarmed button on alarm system before it goes off ? Most alarms u use have a keypad to put a password in before it goes off. Can anyone help with this. As every time I walk in I can just hit the unarmed button and it goes off 😩