Wiring the Audio Lead For The CE 19 For The Xiegu X5105/G90 

Glad I could help

I'm on FT8 most days on bouncing around the HF bands (Not 60m/5MHz as my licence does not cover that band) I hope to catch you on the air some time.

This was such a simple thing that I didn't think of covering it until someone on Facebook and also in the forums of QRZ.com asked specifically if there was a video showing it. As I had one I needed to wire myself I thought I'd video it. I was surprised at how many people viewed this in the first 24 hours and even after 2 weeks it is still going strong with 193 views. I am so glad that it has helped so many people.

You are welcome. I was surprised that no one else had already done it.

I am also learning how to use a c19♡ with a g90! Fabulous ♡♡

Thank you.

I am planning to do a full in-depth walkthrough of the G90 at some point but for now all I can tell you is:- 1: Short press "FUNC" then press "POW" twice and change the input from "MIC" to "LINE" 2: Set "MODE" to "USB" 3: Short press "FUNC" then press "CMP" and turn for maximum width 4: Short press "FUNC" then press "NB" and turn for maximum width 5: Turn off "AGC" + preamp/attenuator 6: Long press "FUNC" press next until you see "AUX IN Volum:" adjust for your TX volume (If too low it will not TX. If too high your signal will distort) 7: Long press "FUNC" press next until you see "AUX OUT Volum:" Adjust this until the WSJTX dB volume is between 40 & 60 so the PC can hear well 6 & 7 will vary according to your personal setup (antenna/coax/sound card/computer/etc.) I hope this helps.

@@A.R.O.T.A. thanks much

Your welcome.

I have seen some of the wires provided that do not conform to this standard so I recommend the use of continuity testing to be sure.

Sorry my face was covering the main window of it. It's called GridTracker. Please see this video I did on it's setup ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zOfB6WG35lY.html

All pins should be identical but the AF_IN and AF_OUT should swap over.

@@A.R.O.T.A. Excellent. Thank you. I bought the C19 sec hand. No cable! 73.

If you follow this method the wire with the green marker connects to the speaker out of the sound card and the red marker connects to the microphone/line in. If they are wired correctly you will see activity on the waterfall of WSJT-X (20m daytime/40m nighttime are normaly busiest) if not try swapping them around.

Sorry. Best I could do at the time and only had one chance to get it.