WITH THIS DEVICE YOU CAN MAKE PERFECT DADOS AND RABBETS | MY VERSION OF THE KERFMAKER

Подписаться 79 тыс.

Просмотров 277 тыс.

50% 1

Making Dados and Rabbets is a tricky task on the table saw when you are trying to get a tight fitting joint.
I had some leftover pieces from my last project. So I decided to make something out of it. I came up with the idea to make my own version of the Kerfmaker. I wanted to make it so simple as possible and the leftover pieces were perfect for that. Once set the Kerfmaker right, it works perfectly every time.
ISBI
----------------------------------------------------------------------------------------------------------------
If you want to support my RU-vid-Channel you can donate here :
www.paypal.me/isimplybuiltit
----------------------------------------------------------------------------------------------------------------
FOLLOW ME ON
INSTAGRAMM :
/ i_simply_built_it
TWITTER :
/ isimplybuiltit
PINTEREST
www.pinterest....
FACEBOOK :
/ isimplybuiltit
-------------------------------------------------------------------------------
#ISimplyBuiltIt #like #comment
-------------------------------------------------------------------------------

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 272

@YouGumppy 4 года назад

This KerfMaker is simpler than those commercial and DIY solutions on the internet. And, more importantly, is intuitive to use. Thank you for sharing.

@ISIMPLYBUILTIT 4 года назад

Thank you so much. I really appreciate that.

@SonofDaVinci4 2 года назад

Simple, elegant, and innovative design. The hand holes in the sled fence are a great idea too. I am looking forward to watching more of your videos!

@kanedNunable 4 года назад

the hand holes are genius, and make this sled super safe to use i imagine, well done, i have watched bloody hundreds of sled vids and thats the first one i have seen, also reduces weight i imagine?

@snovku 3 года назад

I agree. Those hand-holes are game changers. I will quite happily steal this idea for my sled. Thank you.

@jaysontiggs643 3 года назад

Well designed, your version requires less steps to create and is perfectly accurate. Thank you for sharing this with us!

@sjwegener 9 месяцев назад

Great way to make use of those short left over chunks of t-track

@BrettHall 4 года назад

I like your designs. You manage to find very simple solutions to problems. Others I’ve seen are more complex and I think simple solutions are the best.

@ISIMPLYBUILTIT 4 года назад

Thank you so much

@junkmail4613 4 года назад

Beautiful piece of work. Most enjoyable!

@ISIMPLYBUILTIT 4 года назад

Thank you

@Cecil_X 4 года назад

I like your use of T-Track. This Kerf measuring tool is simple and easy to make. In December, I made one for me and one for my son for Christmas. He loved it. Thanks

@klyiu2006 4 года назад

Wow, this looks a lot more simpler than the other kermakers I have seen on RU-vid, but it is really brilliant. Thanks.

@ISIMPLYBUILTIT 4 года назад

Thank you.

@bijan4727 7 месяцев назад

Hello Sir. This was an awesome, excellent, and elaborated presentation along with magnificent idea. I loved it.

@countrymagic61 3 года назад

I really enjoyed your version of the kerf maker. I did make it, but have not had a chance to use it until recently. I want to give you a shout out and kudos for your kerf maker. I was able to get my dado and groove right on the money. With the screw set as an offset for the blade thickness, you can also use it to fine tune the dado or grove. Thank you for the video and inspiration!

@countrymagic61 4 года назад

This is an awesome idea! I will be making one of these! So SIMPLE. I do like how you simplify things. Great videos.

@ISIMPLYBUILTIT 4 года назад

Thank you so much.

@-_AjB_- 4 года назад

That's the best I've seen. And beautifully explained.

@ISIMPLYBUILTIT 4 года назад

Thank you so much

@theblackcubechannel 4 года назад

Simple but great. My favourite. Thanx for sharing your ideas with us! Dankeschön...

@ISIMPLYBUILTIT 4 года назад

Thank you. I'm glad if you like it. Gern geschehen :-)

@theblackcubechannel 4 года назад

I SIMPLY BUILT IT nachgebaut, ausprobiert, für richtig gut befunden :-) Am Nachbau Deiner neuen Sternvorrichtung arbeite ich noch... Viele Grüße aus dem Erzgebirge und guten Rutsch

@marciosquilassi3392 4 года назад

Great and easy! Congrats from Brazil.

@mahatma_manett 3 года назад

Sehr schöne Ausführung und Erklärung. Vielen Dank 🙏 🍀

@silviocavalheiro4530 4 года назад

Very good jig. Congratulations from Brazil!

@ISIMPLYBUILTIT 4 года назад

Thanks

@MCsCreations 4 года назад

Pretty nice work, dude! Fantastic idea!!! 😃

@ISIMPLYBUILTIT 4 года назад

Thank you

@bobmeeks96 3 года назад

Simple, effective design. Going to make one. Thanks.

@followme8238 Год назад

After watching a few Kerfmaker videos I ordered one on Amazon - but I’m still going to make yours because it looks so easy! Great video

@acerjuglans383 9 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-amNsrd4EZbU.htmlsi=7YZiOsrKbshSNpTC

@johnshort1536 4 года назад

Great job, well explained.

@ISIMPLYBUILTIT 4 года назад

Thank you

@edymoss3466 4 года назад

Thanks alot for the video and instructions Will definitely give this a try before spending $60.00 on a micro Jig kerf maker Thanks again for sharing the idea

@sabsaschabitter4489 4 года назад

Einfach Spitze, das wird nachgebaut. Vorallem eine Spitzen Resteverwertung... ein Stück T-Nut Schiene hat jeder wahrscheinlich rumliegen. Danke dafür

@ISIMPLYBUILTIT 4 года назад

Ich danke Dir für diesen Kommentar. Freut mich wenn es Dir gefällt.

@hinterfragender6287 3 года назад

Einfach genial, wollte mir schon einen kerfmaker kaufen. Hat sich mit diesem Teil erledigt thanks for this.

@rameshshah7899 3 года назад

Best one video I saw. Thanks show more such video

@DBYNOE 4 года назад

I built both a kerfmaker abd a tenon maker (i.e. they are what's pictured in my avatar to the left of this comment), I'm very impressed by the elegant simplicity of your design, I think it's much better than even the original.

@ISIMPLYBUILTIT 4 года назад

Thank you so much.

@jimw544 4 года назад

I subscribed and rang the bell. :) I hope to soon build 3 of you projects. But first I must finish my work bench.

@timg8337 4 года назад

That's brilliant.

@oldmgbs2 4 года назад

What a great idea!

@ISIMPLYBUILTIT 4 года назад

Thanks

@MrRafterPL 4 года назад

One piece of wood, simple and easy to adjust. I'll do it next week

@kennethslater9349 4 года назад

Love it thank you so simply brilliant

@marklewis9959 4 года назад

Fantastic i was going to order one from China but will be making yours instead big thumbs up 👍

@ISIMPLYBUILTIT 4 года назад

Thank. I'm glad to read that.

@fiziwig 4 года назад

Very nice. I'm going to my shop right now to make one! :)

@ISIMPLYBUILTIT 4 года назад

Thanks. Yeesss!!

@houtjeboom 4 года назад

Great tool... like all your hand made tools! Do you have a link where you bought the the flattooth blade? Keep on making great videos!!

@ISIMPLYBUILTIT 4 года назад

Thank you. I bought it on Amazon.de but on Amazon.com, such kind of blade should be also available. Here is an example : www.amazon.com/-/de/dp/B00004T78V/ref=sr_1_7?__mk_de_DE=ÅMÅŽÕÑ&crid=17S56BSNZXOS0&keywords=table+saw+blade+flat+tooth&qid=1574872947&sprefix=table+saw+blade+flat%2Caps%2C318&sr=8-7

@robhimself79 4 года назад

This is a really helpful build!

@ISIMPLYBUILTIT 4 года назад

I'm glad if you like it

@marcciesla9238 4 года назад

EXCELLENT!!! SIMPLE et EFFICACE. Vidéo très bien expliquée. Merci pour le partage. (chaque semaine, j'attends avec impatience votre nouveau projet)....

@ISIMPLYBUILTIT 4 года назад

Merci pour le compliment

@stefano923 4 года назад

Great solution!!!... please, what kind of flat teeth blade do you use? Thanks!

@ISIMPLYBUILTIT 4 года назад

Thanks. www.amazon.de/gp/product/B0013LI2MS/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 . I bought it from Amazon.de. I don't know if it's available on Amazon.com

@markmccaw4401 4 года назад

Very nice job.

@ISIMPLYBUILTIT 4 года назад

Thank you

@jespermeyer5014 4 года назад

Really nice - In the video you mention you use a special flattoth sawblade when cutting Dado's. Do you mind sharing details of that blade?

@ISIMPLYBUILTIT 4 года назад

Thank you. Of course. Mine is from Amazon.de : www.amazon.de/gp/product/B0013LI2MS/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 . But on Amazon.com such blades should also available. Like this one : www.amazon.com/Freud-Thin-Kerf-Blade-LU87R010/dp/B0000225UH/ref=sr_1_2?keywords=flat+tooth+saw+blade&qid=1575351183&sr=8-2

@00tact 4 года назад

Awesome!!!!! Thx!

@juanc.mendoza632 4 года назад

Hello from Easton Maryland. Wow! I made my kerfmaker and to build together took me day and a half. Your idea is great! So simple and so precise. All your ideas and woodwork is so good. Thank you for share with us.

@ISIMPLYBUILTIT 4 года назад

Thank you.

@briantheprion 4 года назад

I also like your sled design: by holding the piece through those handles I feel like there’s less of a chance of your fingers and hands getting sucked into the blade if you have kickback

@Peterseng24 4 года назад

Brian Le, I will be making the kerfmaker soon. I have made the sled with the hand holes. It is really good, easy to use and most importantly safe. The hand holes also make clamping stopblocks to the rear fence easy with small F clamps. 🇦🇺

@ISIMPLYBUILTIT 4 года назад

Thanks

@markwoolman6329 4 года назад

Nice one

@ISIMPLYBUILTIT 4 года назад

Thank you

@cliveclapham6451 4 года назад

I always use hares instead of rabbits, they're just a bit bigger,🤣🤣🤣 Turning the setting screw in and out, for splitting hairs😂😂😂 Sorry just couldn't resist. Excellent simply made kerfmaker. 👍👍👍👍

@countrymagic61 4 года назад

To funny! :)

@NavinBetamax 4 года назад

"" Too ""......

@countrymagic61 4 года назад

@@NavinBetamax "To" or "Too" ? So What! I'm a woodworker, I don't make mistakes...It was a design change! To is a preposition with several meanings, including “toward” and “until.” Too is an adverb that can mean “excessively” or “also.” For all you grammar police out there … Duh! I forgot a letter "o". Big deal, so what, the world is going to end! Get over it.

@NavinBetamax 4 года назад

It stings you ? Eh ? ...........??????

@countrymagic61 4 года назад

@@NavinBetamax No. I felt compelled to reply. No other reason.

@briantheprion 4 года назад

Very very nice and clean.

@ISIMPLYBUILTIT 4 года назад

Thanks

@CelestialLites 4 года назад

Kool design, I need to make one. But I keep getting distracted, what watch are you wearing? :-)

@ISIMPLYBUILTIT 4 года назад

Thanks. It's a Stührling.

@Michelangelo19571 2 года назад

👍👍

@irvinwittmeier5208 4 года назад

Nice !;-)Thankyou

@ISIMPLYBUILTIT 4 года назад

Thank you. You're welcome.

@muderabbas2517 4 года назад

👍👍👍👍👍👍👍

@thejet4115 4 года назад

i hear a German accent... yup, its a good design, thanks much

@SouthpawDavey 4 года назад

I have one that I made but yours is nicer ;-) Danke

@ISIMPLYBUILTIT 4 года назад

Thank you.

@philipswan1016 4 года назад

great gig, good video way too many ads

@clutions 4 года назад

... bye ... gotta go to the shop and make mine ... you saved me $30

@ISIMPLYBUILTIT 4 года назад

Nice.

@lxxs3v3nxxl 2 года назад

If you made plans for all of these you would make money

@nikos-giorgos 4 года назад

2:40 When your camera decides for itself where to focus(wristwatch at far right)!

@acerjuglans383 2 года назад

There's dozens of kerfmaker jig videos on RU-vid. They're all well made. Yours is too. However, they're all designed to be used with one blade only, unless you want to continually adjust that screw, and do test cuts with other blades. There's one video on RU-vid that is WAY quicker, simpler, more accurate, and can be used with any blade or dado set. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-amNsrd4EZbU.html

@vladcontact 4 года назад

Just use off cut of the material same way next time mate To many jugs to make a jig to make a jig

@brianmead5102 4 года назад

I have watched a few of your videos, and I really like the way you explain things, your awsome thank you

@ISIMPLYBUILTIT 4 года назад

Thank you so much. I really appreciate that

@lonniecrook1684 4 года назад

Thanks so much for this simple and accurate design. I made one today and can't wait to use it on my next project. I'm a subscriber! Update: I used your kerfmaker for the first time on a project and my dadoes were perfect, best I've ever done. Thanks again!

@clivebashford2900 4 года назад

I've seen a few of these on utube now, but this is by far the best. Keep up the good work.

@ISIMPLYBUILTIT 4 года назад

Thank you so much. I'm glad to read that.

@ljaphillips 4 года назад

Only just saw this after looking at other kerfmaker videos and this is so much easier to do. Mind = Blown. Keep up your good work.

@awwwshucks443 2 года назад

This design is awesome. I am considering making one out of HDPE to avoid any humidity concerns. Also using a screw insert along with a little blue thread lock to keep it stable.

@countrymagic61 Год назад

I think this is the best design for a kerf maker (less complicated as well). I have built and used this design and love it. I like your idea using HDPE. The only issue I had with the one I made is operator error🤣 Not paying attention to what I was doing.

4 года назад

Hello my friend. That's a great idea. Doing Dados and Rabbets is a difficult task at the table, trying to get in touch. Congratulations. Thank you for sharing. Huge greetings...

@ISIMPLYBUILTIT 4 года назад

Thank you

@YouTuber-mc2el 3 года назад

I have watched a few of these kerfmaker videos and yours IMO is the better of them all. Well Done. I also liked the handholes in your sled.

@acerjuglans383 2 года назад

This is the best one yet: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-amNsrd4EZbU.html

@markhedquist9597 3 года назад

Super simple and functional. All while saving gobs of money! This is the one I will build. Thanks for sharing this video. On another note, in some future video would you mind saying the words, "I'll be back."? Just for the heck of it? No reason, really...

@gregghernandez2714 2 года назад

New subscriber here. Beautiful, elegant design. Thanks. Could you please let me know what blade you are using? It makes really clean cuts. Thanks again.

@daveweigle4090 4 года назад

Phenomenally simple and very accurate. Not only that but simple to build. Thanks.

@ISIMPLYBUILTIT 4 года назад

Thank you

@davidharvey5672 4 года назад

I like this design better than the usual one.

@ISIMPLYBUILTIT 4 года назад

Thank you

@danceswithaardvarks3284 4 года назад

Very nice. Pretty sure many of us are going to be making t-track that way too.

@ISIMPLYBUILTIT 4 года назад

Thanks

@cruzlopez9288 2 года назад

I made one like this thanks to your video and it works very good too Thank you. I do have a stupid question since I am just a beginner woodworker. How do you use this Kerfmaker on wood pieces that are longer than the width of your sled and cannot put a stop block where you need it?

@johnso47 2 года назад

Just gotta say, at first I didn’t understand you sled setup and why you were putting your hands through the holes. Then it dawned on me. That’s where you are supposed to put them to be able to hold onto the work piece and know that your fingers are a safe distance from the blade. Great ingenuity!

@bobbg9041 4 года назад

Clever tool. Thanks. Shop made tools are always welcome, they help hone your skills.

@ISIMPLYBUILTIT 4 года назад

Thanks

@johnharrison8807 2 года назад

Great design I will be building this instead of buying a kerfmaster.

@plasticbuzzardmodelshop9715 3 года назад

Nice version of the Kerfmaker. 👍

@johnvodopija 4 года назад

This is a really clever design using the t-track 👍😎🇦🇺

@timflanigan8586 4 года назад

One of the simplest versions I’ve seen. I’ll be making this one very soon!

@Cecil_X 4 года назад

Dito

@ISIMPLYBUILTIT 4 года назад

Thank you for the compliment

@bobbonham4823 4 года назад

Best kerf maker yet. I think I'm making this one. Thanks!

@ISIMPLYBUILTIT 4 года назад

Thanks. I'm glad if you like it

@billcoley8520 3 года назад

Did you say flat tooth blade? I’ve never seen one.

@billcoley8520 3 года назад

What kind of blade are you using?

@777tomwall 4 года назад

Is there a way to purchase the plans for this tool?

@rollingstone3017 4 года назад

Brilliant! Going to make me one, thanks to you 😁

@ISIMPLYBUILTIT 4 года назад

I'm glad if you like it.

@markkoons7488 4 года назад

Good video. I'll be making a kerfmaker just like it. Thanks for showing the actual machining at high speed. I wish/hope others will follow your good example.

@ISIMPLYBUILTIT 4 года назад

Thanks.

@peteesche8908 4 года назад

Don’t cut metal with a SawStop.

@jvaughn222 10 месяцев назад

Simple design that works well using materials on hand. I used a walnut offcut and blue T-tack, just to be extra fancy. ☺

@acerjuglans383 9 месяцев назад

Here's a simpler version: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-amNsrd4EZbU.htmlsi=7YZiOsrKbshSNpTC

@JustAnotherDayToday 4 года назад

Brilliant mate!

@davidnleeh4 4 года назад

That is one heck of a nice Kerf Maker & probably the Best that I've watched be made on here!!!!!

@ISIMPLYBUILTIT 4 года назад

Thank you so much.

@larryjacobs5713 Год назад

You are amazing sir!

@EngineerMikeF 4 года назад

Very clever device, converting also be made with wood slider instead of T-track using short slot for the wing-nut screw & screw glued into the slider. IIWMI'D install the screw with glue for permanence, but that's me.

@breakinn403 4 года назад

It's designed to remain adjustable to be readjusted for other blades when necessary.

@ISIMPLYBUILTIT 4 года назад

That is also possible. The benefit of the t-track is, no need to make a slot.

@ernelonso 2 года назад

Beautiful work....

@laptopsid 4 года назад

A very simple jig that is fantastic. Thank you.👍👍

@ISIMPLYBUILTIT 4 года назад

Thanks. I'm glad if you like it.

@markhewitt3623 4 года назад

Off to make one of those👍😁

@Zefo1964 4 года назад

Congratulations

@daverobinson6384 4 года назад

Genius!!

@ISIMPLYBUILTIT 4 года назад

Thank you

@lucasalvagno9959 4 года назад

Super bravo!!

@robertscroggs2712 4 года назад

Simple to make, but works! Great narration explaining why.

@ISIMPLYBUILTIT 4 года назад

Thanks

@JoseSilveira-newhandleforYT 4 года назад

Nice little tool! Simple to make and simple to use. I like it!

@ISIMPLYBUILTIT 4 года назад

Thanks

@ВикторТюльпа-т7е 3 года назад

👍👍👍🤝

@hvr19041984 4 года назад

He visto muchos vídeos del "kerfmaker" y este modelo es el mas sencillo y preciso y fácil de manejar...,

@fransiscoalvarezinski6293 8 месяцев назад

Must be the simplest and easiest kerf maker design I've ever seen. I can't wait to design and build my own. Beats spending $35 on one. After all, we are woodworkers, right?

@timlist4173 3 года назад

Thanks, I like this slimline design. I have some track that is for a1/4"-20 bolts and some 3/4" oak. Just need to find me the bolt. UPDATE: Got the hardware, it works perfectly. Thank you so much for sharing this.