WLTOYS 104001 Brushless 6S - SpeedRun 

Thank you

Thanks! Your nice comment made my day :)

Thanks very much :D

Thanks Kiwis 🙌 💖

Thanks! But its not the end of the road.. Gotta make it faster 😉

Wow, kind words! 😊 👍 Thanks😍

Yes, pretty insane 😁 🏎

Thanks mate 🙌 appreciate it!

Thanks GB! Appreciate it

Oh Thanks! You have a good sense of humor then 😉

Ty, Cant wait to see! 🙌

Thanks :)

Thanks 🙌

65 is not slow with that car. Good job! 👍But yes, it has more potential for higher speeds. Let me know how the new gearing works out! 😊

Ty!! Its above average fast you can say ;)

Thanks for your kind words!! Glad you enjoyed it :D made my day!

Thank you :)

🔥🔥🌞

Thanks 🙌 very kind words. Yeah its pretty unreal when it flies by in those speeds. Sounds like a jet 🛩️

@@LOLRC Im sure the camera sound doesn’t do it justice.

@@TheFrenchPug not really, but its a sweet sound :)

Yes, funny you caught that detail 😁

Wow, hehe! Dont know about that, but thanks for the huge kudos 😍👍

If this where to be a ww2 plane, its a kamikaze plane 🙈

@@LOLRC I wouldn't want to be surrounded by giant lipos ready to short out and blow in a crash at 110mph that's for sure

@@jeffreybarton3014 Yolo :P

Thanks 😍 U2. Great channel!

Hehe, thank you! 😊 👍 Yeah, a body builder that have taken a little to much steriods 🙈

Thanks! I used the maverick wing (MV22110), but im not sure how available that is atm. Might be very simular to the Hobao Hyper 7 Wing as well. Good luck 😊

Thanks 🤗

Love 😍

Thank you :)

hehe, fun that you appreciated my jokes. Next time Ill get Kramer to read the voice over ;) Mamacita!

Thanks 😁

Yeah, as long as you add alot of power it will go to extreme speeds ;) You have any specific plans for what system you want to put in?

Good luck 🤞

Yeah, surpass delivered really good. However, I have now received tp-power motor, will make a video on In after winter 👍

@@LOLRC oh man! TP power is phenomenal 🙆 Man guarantee it went 130 150 mph

Ty A ;)

Hi, thank you 😊 Its Drag racing tyres from Contact RC. Rear: 45mm width with 70mm diameter (Item No. JD30RA) Front: 32mm width with 70mm diameter (Item No. JD30FA)

Hi! Both yes and no. There are Cap Packs integrated in the ESC, but I dont have any external one. I will consider adding external ones in a later stage maybe. Thanks for the tip :)

Most high end escs have them built in especially brushless escs ... that more of a add on for brushed escs and its ment more for constant punching out of corners on a track....this is basically drag racing.

Yes, its not standing still 😉😜

@@LOLRC 😆

👌

Thanks for the nice comment 😀 (Music: Artist -"Song name") Music background: L'Orchestra Cinématique - "F1 theme song cover" Bass slapping: Dirty Loops - "Pink Power" End of the Road song - Boys to men cover - "End of the road" Cherfull riverdancish music: dont know the name. :/ Ending song: Chunnyt - "Getaway"

@@LOLRC thanks man

Go on google maps and see if you can find any long stretches near by :)

Hi, thank you 😊 I am using foam tyres for those speeds. Its "Drag racing" tyres from Contact RC. Rear: 45mm width with 70mm diameter (Item No. JD30RA) Front: 32mm width with 70mm diameter (Item No. JD30FA)

@@LOLRC okies cool. Thanks for replying too. Stay safe 😆

Yeah 😁 but i might add some lights for visibility 👍

In this video I had changed, the wheels, esc, radio and motor. But last run I broke the driveshaft. I have replaced them with a universal joint shaft, but havent tested them yet. Its winter here now 😕

@@LOLRC hi OK good and where did you buy the driveshaft. thank you

I used the maverick wing (MV22110) for the back wing, but im not sure how available that is atm. Might be very simular to the Hobao Hyper 7 Wing as well. For the front I used TRX-5446G Wing, Revo (Exo-Carbon finish) from traxxas. Just google it and see if you have it available near you :)

thank you .. how did you adapt .. because the front bindings are not oriented in the same direction?? thank you

Thanks 👊 as long as you watch the temp, and dont overheat the motor, its not a problem. Take care😊

@@LOLRC wow! And the motor can hold 73k rpm? 6s = 25.2 V (4.2 per cell). 2900 x 25.2 = 73080... It seems to be so much rpm's, doesn't it?

@@raulmartinezmartin9240 A 6S battery pack has a nominal voltage of 22.2V. So You have 2900kv X 22,2 nom.volt =64380 rpm. It is in theory, havent measured what the motor actually can do :) And if you add 27t pinion, 32 spur, roll out 65.11mm, gear ratio 2.85, final drive ratio 3.38 and tire diameter of 70mm into the equation .. the calculated top speed is 251 km/h.. However you have to take aerodynamics, traction, ++ into it. This is just Theory. Alot harder to actually get in real life ;)

@@LOLRC 😅😅 I means 4.2V per cell full charged, but you right, so many more factors on equation. Thanks bro for your responses and very interesting videos!!

Its 5mm mod1 pinion and I ordered the spur from Michael Koebbe on Facebook. Hit him up and he will help you. 👍

Helo, as long as you keep an eye on your motor temperature, it should bo ok. I am running a 2900kv on 6s, but in theory its only rated for 3S.. But as I said, as long as it dont over heat, it should be ok. (disclaimer: on your own risk ;)

@@LOLRC grazie amico

SURPASS HOBBY KK 3665 Brushless Motor 2900KV 👍

Not stock. Mod 1 spur 32t. Mod1 pinion 27t

Yes 👍

here you can find some: islandhobbynut.com/search?options%5Bprefix%5D=last&q=pinions

Hi, Its Drag racing tyres from Contact RC. Rear: 45mm width with 70mm diameter (Item No. JD30RA) Front: 32mm width with 70mm diameter (Item No. JD30FA)

I replaced the stock spool with a mod1 spool :)

@@LOLRC car to share what spur gear size and combo? I just put one together stock spool cm36 castle 5700kv 31t pinion me about 65-70 on 3s Looking to put a mamba monster 2 and a 3670 2500kv mod1 conversion no clue what gearing to start with

@@bevinsracing Sure! I am using a 32t spur gear and a 27t pinion gear (mod 1) With a 2900 kv motor. Wheel diameter is 67mm. And with 6S batteries (22. 2V) this car can do 240.71 km/h in theory 😊

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MSrHoJHCa3I.html

Hi, Its Drag racing tyres from Contact RC. Rear: 45mm width with 70mm diameter (Item No. JD30RA) Front: 32mm width with 70mm diameter (Item No. JD30FA)

@@LOLRC tq,nice design tyre,ok👌👌

Thanks! Yes SURPASS HOBBY KK 3665 Brushless Motor 2900KV.

How about battery?

@@yusyusuf3526 2 x 3S Spektrum 5000mah 100c. (6S)

Thanks.

Hehe, can you please do an 8s?😅

Lol, Maybe Low Gear RC ;)

Yes

It is a wtf-text-to-speech-robot. Thanks for the kind words!

@@LOLRC yea you need to fix that if you want more subscribers. Use your own voice not some robot.

@@landscape6285 Yeah, but im not that serious about it. Its just for fun, and the robot speaks better then me. Maybe some time in the future. Take care :)