Wltoys 12428 Best shock upgrade and 3s install guide 

talking defo. personal advice and opinions is always better☺.

Did you even fill the shocks?

@@michaelargumedo7267 these are prefilled. I checked. Need new oil but thats not the point of this video

Hi i'm new to your channel...LOVING IT SOFAR!!!!

Quiet demonstration is ok 👍👍👍

Did you see the 110mm ones i put on. Actually have buggy tires now too

Wow is buggy minismart?😅

@@pedroandino215 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QXgZjskfEOw.html

Yea ive had a few diffs with 3s brushless

Right on thanks i was still early in my youtube days. We were on vacation. Still running these shocks aswell.

I had 1/10 drift wheels with 12 mm hex. Big mud tires are austar beadlock super swamper

Look for 1.9 super swamper / austar wheels. Sorry it has been a long time since

108/ 110 mm 1.9 super swampers

I put links in description for shocks and batter

@@supastihl89 cheers

Sorry long gone bud

@@supastihl89 but he requests you.

I got sore

I got spare

There not stiff at all. Idk what you mean. They are offroad shocks made to absorb large bumps. It handles very well now still using these shocks. Trust me they are soft.

I don't understand. They were very easy. Only 2 screws each

Mine were filled with a thin oil. I need to order better oil. I had to rebuild one after jumping it off my roof

There are pins that hold the front suspension arms. They are the long bolts with the nuts towards the body. If they become bent they can make the suspension not want to move. Also the shocks cylinder can be bent which would cause them to stick or bind. I would remove shock amd check arm amd shock separately to narrow down where the binding is. Maybe shock angle is not good also. 🤟

Hooptie Rides&Reviews Cool thanks for the input. I’ll give it a try.

No it is just the one cylinder on the shock itself I found that the piggyback cylinder is a false one there just for looks that's what I get for getting cheap ones but they still work very well

Power hd 20kg servo flysky gt3b 3channel rx goolrc 4300kv 60 amp

Stock spur and pinion metal open diffs

It is wltoys a959 front shock tower

@@supastihl89 tks

It made it lower which helps stability and reduced the stress on the motor with smaller wheels. However i didnt notice it rolling or flipping any less when it came to me losing control. But at high speed it was stable and less ballooning with less tire aswell. However i was forced as i destroyed 1 set of wheels and it was so fast it sent my beadlocks tires off the rim and into the woods...

@@supastihl89 thanks for the info mate 👍👍👍

I have replied previously to someone else that they come oil filled but with crappy oil I have since replaced I didn't have to do it in this video wasn't the point of this video

Bad bearing. I have metal gears in back. And extra metal gears for front if it breaks. No comprende mucho espanol me amigo. Gracias

@@supastihl89 Hi,l do not speaker English aces sent to Tijuana or rosarito

Yes. Need heavier oil tho

@@supastihl89 Thats great! Thank you. Why do you say heavy oil though?

@@woodysgeekchannel2204 more dampening

I found my 3s charger broke and was only charging 2 cells. 💩

@@supastihl89 A-haaaa I thought there must be something when you said that 3s did not make much difference! 3s will give you much more performance, but obviously the downside is much more wear and tear and broken parts. I think the best battery to go with this car is a 2s Lipo but no more than 3000mAH. I use the 2200mAH to keep the weight low, and It gives decent running time, at least 20 minutes, and more than that if you don't go full throttle most of the time. So I much prefer sticking in a 2200 and have a charged spare one with me, rather than a 5000mAH. No music is OK with me, but some light commentary would harm no-one. Well done and cheers mate!

@@radiocontrolled9181 thanks bud. Yea I lost that pack and learned a lesson thanks again. 🤟

They are between 5 and 10mm taller in the back. Front is the same.as of now. If i can utilize that bracket it will be a slight bit taller in the front. If you want taller 115 mm in the back is all id recommend. Too much pitch on shaft. Id have to say i gave up the idea of making it bigger. Eyes on the 10428b. Excellent crawler similar setup but bigger.

@@supastihl89 thanks for the feedback im planning to buy a 12428😀😀😀

@@den41400 these are for high speed and dunes maybe some jumps if you want a crawler 10428 is better deal. Good luck bud.

Cringe

Stop it