WLTOYS 144001 FULL METAL UPGRADE | DISSASEMBLY | WLTOYS 144001 FULL TEARDOWN REVIEW | WHAT'S INSIDE 

Thanks for sharing. Concise and accurate with great camera angles of what you’re doing.

Plastic arms and ball links are better, just buy spares…less weight, better fit and give some flexibility to prevent more severe damage😊

i did a full metal conversion of the 124007 1/12 scale and the upgraded parts fit super good in this newer version so dont be afraid to order go ahead the arms are thicker less gaps and now come with 2 extra needed bearings for the rear to have 3 in total for each side for clearance so overall perfect upgrade for me.

Thank you, helps a lot

Great informative video. Have you bashed the all metal Wltoys in a skate park? How did it hold up?

I bought one of these kits and put it together this exact way. Within 3 minutes of the first run post upgrade, two screws backed out and fell off in a grass field and the pull rods won't stay the correct length. Back to the original parts we go.

This is a very handy video as I just bought a 144010.

Hi. I loved your video. Can you help me ? I've lost This rod that connects the engine to the wheel, making it spin. How do I buy a new one? What term do I use in the search? I also lost a clamp that holds the bodywork.

Excelente actualizacion realizada a este WLTOYS 144001, respetos desde Venezuela.💯👍🤜🔥🤛🙏💯💯👍👍👍

I went full metal on a wltoys and it was a mistake. Rods would just break from driving at high speed even without hitting anything. When a crash did happen, pretty much every single metal piece broke or bent. I put it all back to stock. It's better I think. Metal looks cooler but there is a place for it on an RC, and the entire car isn't the place for it. Swing arms? sure. gearing?...depends on the metal quality but sure. Chassis? Depends on what the car is for, racing yes, but for bashing metal probably is not the best. I actually prefer plastic Chassis generally.

Great upgrade Amazing buggy 😲👌👍

Nice video I was literally wondering if these full metal kits are worth it. I think I'll just do the wheel hubs Also where did you get that tool mat. It looks really nice

OMFG I've been struggling with those C clamps for like over a hour. Didnt even think to take the other piece off first. LMAO thank you.

Sorry about your COVID lockdown bro 😢 keep your head high I hope the world improves! 🙏

I do this metal upgrade and its just worthed for me , the problem with them only if you play extreme like you hit anything in front of you, but if you play it well the metal gave more stability, if you can't control your rc dont hit full throttle

Las horquillas serán compatibles para un Tamiya TL-01 B ?

Great vid

What is the name of this key to remove the wheel ??

Will these parts fit on a helion animus 18mt? They look a lot alike. Helion went out of business and I can't find parts that I need. There are some but not much. I'm hoping someone on here will know.

Why did you keep the plastic drive shaft and gear?

Why would the pull bar rub the arms and construct the tires from fully turning!?

Muito top

I loved watching your video, everything organized Everything clean and well explained, count on my support 👍👌😉

Joli travail

You using it all stock right ? I didn't know this will be still this fast with metal parts. Nice!

Legend 🔥🔥

DO the alloy upgrades make the car heavier?

although cool .... it's not rly an upgrade it's actually making the care more fragile

Top mano

I did a full metal upgrade with a different but very similar set. On the front wheel assembly, I had a major issue with the screws that secure the steering arms. The steering arms extend inside of the body of the wheel, and the screws that keep them in place for the full metal upgrade have a large rounded head. Those screw heads rub against the inside of the wheel when you're driving. You can *almost* see the same issue in this video at around 12:03, behind the "B" of the Banggood logo. I ended up just reinstalling the ball that the plastic arms use and using some pliers to force the ball & the metal arm together. Not great. Did you run into this too?

I commented below that have the same problem that Dennis with part 1525, the rear seat wheel. I watched the full video in the link you provide in your reply to Dennis and that part is not dissasembled there. My problem is that I broke it and had to replace it. That part is joined to the arm with a very tight metal bar that I do not know how to take out. I do not know what took can be used for that. If you could give me a clue I would appreciate it. Thanks a lot for the video.

Link order ?

Excellent video, excellent work! But putting lubricating paste on the reels?!? In plastic?! It will roll better, and make less noise, but it will create the effect of slipping, and the plastic will lose all its teeth!

nice

Why you didn't use the new pinion gear and spur gear..

I've got even more metal on mine I did suspension and wheels it's ace innit ❤

Mình mua sao các mặt đạn không dính cố định dù đã đóng nó vẩn lõng le à bạn

សួរស្តី

does it come with tools or not. if it doesnt what size tools do u need thanks

Brother from Pakistan the axle and universal joint are not available ,,i export from china but it is too much price.plz suggest me tips of home-made

Wish I could get mine back together as easy as that 😢

does anyone else have the problem that der Servosaver doesnt come off like that?

can this part be installed on wl144010?

Power full

Hello. Does the 144001 and 124017 have the same gearbox? Thanks.

Which tools, glues and oil do I need to donitnlike you? Watching this is like meditation, as long as nothing is broken. Then it gets a little stressful 😁

Can this part for upgrade wltoys124016?

Super

😊

The only part i needed to know how to disassemble wasn't disassembled! I need to replace item 1252 as can be seen in the video at 5:16. That's the part most close to his finger in the top of the screen. Has anybody any idea how to remove this?

can i get this thing in amazon or ali?

Look great .. but the vehicle performance suffers

my upgrade kit is ordered... juhu

Le sospensioni arrivano già con l' olio all'interno?

OwO hé lô rôm việt nam vết lốt ❤️😁

👍😊

No diff case / tower upgrade 🤔

You should run it for a month and a half and then try this also you didnt show how you got the glued screws loose ain't no way you undone them by hand.

Hi

Bộ kit đó mua bn v bạn

Veri nice 👍😅

are u from vietnam ? i has see the plate of the black car is 47A,... Its from vietnam buon ma thuot and i am from that city too

عالی

Bạn là người Việt Nam à

muy mal ni as cambiado la electronica ni el piñon de plastico

Hởm ngày coi mà tưởng người nước ngoài

Hi

Hi

Hi

Hi

Hi

Hi

Hi

Hi

Hi

Hi