Wood cupping and bowing are deformations that can occur in wooden boards or panels due to changes in moisture content. These deformations are common and can affect the structural integrity and aesthetic appearance of wood products. Here's a brief explanation of each:
Cupping:
Description: Cupping occurs when the edges of a board or panel are higher or lower than the center, forming a concave or convex shape resembling a cup.
Cause: Differential changes in moisture content across the width of the wood are the primary cause of cupping. For example, if one face of the wood gains moisture while the other face remains drier, the board will tend to cup.
Bowing:
Description: Bowing is a deformation that results in a curve along the length of a board or panel. The entire length of the board may curve either upwards (a convex shape) or downwards (a concave shape).
Cause: Like cupping, bowing is typically caused by uneven changes in moisture content. If one side of the board gains or loses moisture more than the other side, it can lead to bowing.
Addressing cupping and bowing often involves allowing the wood to stabilize by reaching an equilibrium moisture content. In some cases, it may be necessary to remove the affected wood and replace it or to employ techniques like jointing and planing to correct the deformation.
You can check out my Eye Candy Affiliate and use Wackey10 at check out for 10%off
linktr.ee/Wack...
Other RU-vidrs that have helped me with their latest videos,
Jamie Page : • Woodturning | Large Ma...
Jake Thompson : • 10 Resin And Epoxy Tip...
20 окт 2024
