Wood Jointer Tips for Setting Up and Using a Jointer

Подписаться 665 тыс.

Просмотров 121 тыс.

50% 1

A Wood Jointers is used to make boards straight, flat and square. Setting them up and using a jointer can be frustrating if you are not getting good results, so this video will help bring these elements together so that building home furniture, jewelry boxes, storage units, house molding, cutting boards, and other wooden items that require precision sides, will not be a mystery to make. In this video, we look at how to use a wood jointer and also look at some tips and tricks that will help you in the use of your jointer.
+++ This video is mean to be used in conjunction with RU-vid Video - • Revisiting Setting Joi... and the associated woodworkweb article. +++
************************
Tips to Straighten Boards and Squaring Lumber: • Tips to Straighten Boa...
Make an Edge Jointer Jig Sled/ Edge Jointer Safety Push Block:
• Make an Edge Jointing ...
************************
#woodjointer #jointer #woodworking
**** Read the Full Article Wood Jointer Tips for Setting Up and Using - bit.ly/2XXrrRf
NEW ++++ WOODWORKWEB T-SHIRTS here - teespring.com/stores/woodwork...
**** Amazon Store: www.amazon.com/shop/woodworkweb
**** Subscribe here - / knecht105
** Like me at Facebook: goo.gl/DLgvoa
** Visit the website: www.woodworkweb.com
** Follow on Instagram - / colinknecht
** Follow on Twitter: / woodworkweb

Хобби

Опубликовано:

21 июл 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 228

@bigray2859 5 лет назад

Best jointer tutorial I've ever seen! Should be required watching for newbies, and maybe some more experienced woodworkers as well! Thanks!

@knecht105 5 лет назад

You're Welcome!

@rifosi 4 года назад

I definitely agree with you. After 13 years dealing with this machine I hope NOW I can get the proper results everybody expects from this machine. Thanks a lot, sir.

@hopebass3210 3 года назад

Your videos are the most helpful that I've ever seen for a self taught builder. I still consider myself a newbie after 10 years. Thank you for taking the time to explain things

@daveparker839 5 лет назад

These types of videos are invaluable to a newbie like me. Thanks so much for all your work!

@ryanchristensen4291 3 года назад

Same!

@offbeatjosh82 2 месяца назад

Clicked video to learn about Jointers, ...Subscribed the instant I saw that watch! ⌚️ 👀🤘 😂 ...Left thinking, "If Mr. Rogers was a wood worker, his name wood be Colin!" 😉😂🙌

@jerrycampbell9376 5 лет назад

That Jointer Training Device reminds me of the various training models the Army used, back in WW2 and up into the 1960's. What a flashback! Love it!

@knecht105 5 лет назад

Thanks for watching!

@srairmand 3 года назад

The fact that you made a mock-up to demo for this is impressive.

@damian_fgc Год назад

I don't think we could have a better explanation. Really great content! Thank you!

@jhenderson725 5 лет назад

And i just wanna say i love your methods of teaching. Your so thourough and patient. I wish i had a teacher like you, your awesome. Well I guess I do since im lucky enough to have your guidance here on youtube! Signing off! - Justin from Pennsylvania

@knecht105 5 лет назад

Thanks for watching!

@mildwire Год назад

Thank you for taking the time to explain and give visual examples. I'm sure I will have better results tomorrow because of it!

@JCSchaefer82 5 лет назад

Probably one of the best tutorials on using a jointer. Thanks!

@knecht105 5 лет назад

You're welcome! Thanks for watching!

@kenedstrom1556 4 года назад

Just bought my first jointer and boy do I need this. Thank you Colin.

@jakescheesy Год назад

Well done, really appreciate the level of detail and not too wordy, straight to the point. Keep making videos, you're helping a lot of people!

@MinHongJiwoodstudio 3 года назад

hello..I made a safety guide after watching your video. Thank you for being an inspiration to me.

@keithkoval6156 Год назад

Your expelation of how and why to apply pressure to the workpiece is the best that I have seen, very clear thanks!

@AAA-0 6 месяцев назад

Thanks for helping me understand the machine and the process. I appreciate he woodworkers on RU-vid who share their knowledge and expertise,

@chrisehlers6189 3 года назад

Clearest video on jointer strategy I have seen. A+

@LC3TsJustme3Ts Год назад

Newbie here. So glad I watched this. Thank you!

@rbollard1 5 лет назад

BOY, am I glad you made this tutorial!

@knecht105 5 лет назад

Hope it helps! Thanks for watching!

@PMichaels 5 лет назад

Great video, Colin! 👍🏼 I love your mock-up. It is very helpful to visualize how this works. I was always intimidated by my jointer because I didn’t understand how it is supposed to work. Your video helps a ton. Thank you!

@johnfulton1769 3 года назад

Excellent video by a great teacher.

@happykillmore349 3 года назад

I wasn't taught a lot of this in wood shop, and I've been doing a lot wrong for decades. This video is game changing. Thank you.

@FMcanada 2 года назад

I appreciate all the extra effort taken with the demonstrative apparatus and explaining it to a novice hobbyist like myself. Thank you.

@scroungasworkshop4663 2 года назад

Thanks Colin, I’m currently restoring an old Australian made jointer so I’ll be watching your video again before I start using it. Very informative with clear instructions. Cheers Stuart 🇦🇺

@nevillesukul8800 3 года назад

Hi there again uncle (smile) Colin, another prize-winning video. Thank You and God bless.

@neils521 3 года назад

Just purchased a jointer ! Thanks so much for making this video this helps tremendously!

@aam50 4 года назад

Thanks Colin. That just answered so many questions about how to use my jointer properly (which I've never been able to get good results from and now I know why). Brilliant video.

@503dcccccccccccc 4 года назад

Thank you. Everything I thought I knew about jointers was wrong. I just bought a 60 or 70 year old “(Rockwell) delta 6” jointer” from an auction for $40 and took it completely apart to get everything moving again. I’ve been trying to learn more about it last few days and Your explanation of how to set up and use was clear and easy to understand. Between you and RU-vidr woodworking for mere mortals have become my go to wood guru’s

@joelmatthew1024 3 года назад

Just bought my first jointer last week, this video was extremely helpful with no-brainer info. Thanks!

@willybaetens4648 5 лет назад

As always, explained in a simple, but very effective way. Love your videos. Willy from Belgium.

@knecht105 5 лет назад

Thank You!

@don5nake 3 года назад

The jointer model and explanation are really clear - thanks so much!

@David-xu3yk 5 лет назад

Thanks Colin! I'm looking forward to getting one of these in the near future so these tips are greatly appreciated!

@dennisg11348 3 года назад

I used to be an instructor at a nuclear power plant. You are a great instructor!

@marinefa 3 года назад

Thank you so much for this video, I have been using a jointer for about a day now and I have watched other videos prior, yours is the first one that broke it down like it was for a person who had never used a jointer before, not a refresher course. You have saved me thousands of hours of wasted time and wood. Thank you so much

@rayp450 5 лет назад

I just acquired my first jointer, a used one. These videos are appreciated. Thank you!

@knecht105 5 лет назад

You're welcome! Thanks for watching!

@Metalbass10000 3 года назад

I have seen jointers, and several planers, that had metal surfaces that were not at all flat, or straight, or true. I bought a beautiful 6" Oliver jointer, brand new, helical cutter head, with 18 carbide inserts, and I needed to make new gibs for it. Couldn't cut a flat, straight piece no matter what I did. The manufacturer was stumped, too. After making the gibs it is a spectacular tool.

@Hutchy45445 5 лет назад

Great video. I like your videos, because they get straight to the point, with a brief explanation and visual aid. 😁

@davidahmad2026 2 года назад

Excellent tutorial!!! Thank you!!!

@anchorandchiselwoodworking3670 2 года назад

Watched this video and the quality of my joints increased greatly. My blades were set correctly, but I just needed some fine tuning on technique. Thanks !!

@art58wong 2 года назад

Learned a lot. Good to know when restoring an old rusty machine.

@hammerdownwoodworkingtracy3679 5 лет назад

Again great information. So many people just dont understand the function of a jointer.

@knecht105 5 лет назад

Thanks for watching!

@zmccllc2096 2 года назад

What a useful video! Thank you so much for the help!

@alekjuskevice 3 года назад

That was a wonderful explanation. Thank you for taking the time to explain this concept.

@theowensquiresshow9223 3 года назад

Thank you for all the effort, great video Collin!

@AJ-ln4sm 2 года назад

Thank you for the great tips!

@stevedafoe5257 5 дней назад

Great video, very informative as usual.

@aaudain1 5 лет назад

You are so awesome with those tip, very helpful

@eddiestipe2009 5 лет назад

This is a great video for the basics on the jointer, thank you for sharing, keep up the good work.

@knecht105 5 лет назад

Thank You!

@keatswoodworks5107 7 месяцев назад

So good! Thank you!

@svjness 5 лет назад

Thanks for that mockup and demonstration. I've watched many videos on technique, and I never quite understood how to appropriately push the wood through the jointer. It makes total sense, but I just couldn't visualize what needed to happen until now.

@knecht105 5 лет назад

Hope it helps! Thanks for watching!

@charlesshiba1168 3 года назад

Just what I needed to know. Ngiyabonga.

@gillessophie6158 5 лет назад

Thanks so much for these tips. I bought a jointer few weeks ago and I thought I knew how to use it but now, I know I made mistakes. Your video is clear and your prototypes are very useful to understand. What is important for me is to make the good skill but mostly why I have to make this way. There is less fog in my mind now. Thanks (and sorry for my weak american language. Greetings from France)

@knecht105 5 лет назад

You're welcome, Gilles! Thanks for watching.

@r.si71 2 года назад

Thank you; you answered a question I was very confused about (where to put the pressure).

@RayRosher Год назад

nicely done I have the same jointer and this really helped

@ghost00tj 4 года назад

Thanks again, now i can try it the right way

@charleswhite3705 3 года назад

Very informative, thanks

@ralphboomer5734 4 года назад

Excellent, thank you

@yarethpellot118 2 года назад

You are amazing, thank you for this tips!

@rakeyohn222 5 лет назад

Great teaching. Thank you.

@knecht105 5 лет назад

You're Welcome!

@WesleyBrace 3 года назад

Great video. Great information for a new owner of a jointer.

@DumbUserName782 4 года назад

Great video thank you so much. This helps me a lot!

@thetraindriver01 5 лет назад

Great tips Colin, thanks 👍👍👍

@knecht105 5 лет назад

You're Welcome!

@lovera3878 2 года назад

I am a newby with a jointer and this is a great explanation. I put too much pressure on the wrong places and get bad results. Ill start practicing the right way. I will also get a fixed square for setting up the tool. Thank you

@pedroarellano4266 5 лет назад

Appreciate your down to earth explanations. Good stuff.

@knecht105 5 лет назад

Thank You!

@reinerjakel8950 5 лет назад

This was a very good review of important aspects of using the Jointer. Just purchased an 8 inch with a spiral cutter head and needed these tips and reminders. Thank you.

@knecht105 5 лет назад

Thank You!

@tuesboomer1623 5 лет назад

Informative. I would have made that common mistake on a bowed piece of stock but you explained and demonstrated it well. Thank you

@knecht105 5 лет назад

You're welcome! Thanks for watching!

@geraldmoore3686 5 лет назад

this has been a great help to me in setting up my jointer.

@knecht105 5 лет назад

Thanks for watching!

@stephenkrall7609 5 лет назад

Love these tips....I am planning on getting a Jointer before the end of the year. This will help learning on how to use it. Thanks

@knecht105 5 лет назад

Hope it helps! Thanks for watching!

@huejanus5505 5 лет назад

Very good tutorial.

@rickscarpellotherapy 3 года назад

well damn.... you taught me so much in a nice short amount of time. Many thanks!

@OpekiskaWood 5 лет назад

Great video Colin! Thanks for the tip.

@knecht105 5 лет назад

You're welcome! Thanks for watching!

@ronmacdougall9612 2 года назад

Love the videos,very good info

@DavesShed 5 лет назад

Thanks Colin. You made a really good point in that it is the outfeed table that must be square. You always explain things so well.

@knecht105 5 лет назад

Thanks for watching!

@mild7prime 5 лет назад

Thank you for the great lesson. Ease to understand in logically and visually to me.

@knecht105 5 лет назад

You're Welcome!

@roxoriginal732 2 года назад

Well understanding video,I got the whole thing Colin nice one

@paulfrizzell31 Год назад

Thank you😊

@charliecaltagarone9234 5 лет назад

Thanks for the video! I never really used the jointer in high school. Mostly because I didn't have a shop teacher that cared enough to show us how to do anything. With that being said I have always had questions about the jointer. You answered them in this video 👍

@knecht105 5 лет назад

You're welcome! Thanks for watching!

@adventuresintheoutback4344 3 года назад

Thank You!!!

@JoCoGenics 2 года назад

Just got a delta jointer and couldn't figure out why I kept a bow. Thank you for clear instructions

@briangossett 5 лет назад

This was a great video. Very helpful! A friend gave me an old Delta jointer. It seems to be set up correctly based on the quality of the joints that it produces, but this helps me understand the correct way to use it. Thanks.

@knecht105 5 лет назад

You're welcome, Brian! Thanks for watching.

@AZdroptop 4 года назад

Knowledge and passion. Excellent. Thank you.

@knecht105 4 года назад

You're welcome! Thanks for watching!

@dougprentice1363 5 лет назад

Very good demonstration. I know I have put pressure on the in feed side. Thanks

@thomask4836 5 лет назад

Excellent video! As usual, I learned a lot from you. I have not had as much experience with a stationary jointer as with other tools and I've always wanted one, , , I really appreciated your video some time ago on the electric hand planer and how to avoid snipe. Before I plugged in my brand new planer, you prepared me well! I frequently think of you when I come to the end of a board . . . . so if your ears are ringing, that's probably me again. Thank You Sir!

@knecht105 5 лет назад

You're welcome, Thomas! Thanks for watching.

@scottlouis7785 5 лет назад

Very good explanation, you have a knack for that

@knecht105 5 лет назад

Thanks for watching!

@texasgolfer1013 4 года назад

Great video and very informative. I am new at a jointer and have encountered a problem I can't solve. I replaced the blades on my jointer when it started to develop lots of chatter(?). I replaced the blades and after watching a video showing the proper way to position the depth of the blades, I thought I was successful. I used a piece of 1x3, set it over the blade opening from the out-feed side with the blade below the cutting level and adjusted the blades until the board moved between 1/8" and 1/4" when I rotated the blade under the board manually. (Jointer was not connected). I tested the jointer on a 3/4" piece of wood and it seemed to work fine. When I tried a short piece of 4x4, the blade jammed into the wood and wood was deposited under the blade. I cleaned and re-set the blades and checked for tightness and tried again. Out of caution, I adjusted the blade cutting depth from the in-feed table side to only about 1/64" inch but still had the blade jam into the 4x4. At this point I have no idea what could be the problem and am reluctant to work on the jointer any more until I get some more experienced help or advice. Any thoughts?

@PapaGleb 5 лет назад

Love all your vids. Don’t stop making vids plz!!!

@knecht105 5 лет назад

Thank You!

@nessusguitars 5 лет назад

Great explanation! thanks

@knecht105 5 лет назад

You're Welcome!

@68shiloh 5 лет назад

Thanks for sharing. A great video.

@knecht105 5 лет назад

You're Welcome!

@jerryjohnsonii4181 5 лет назад

Thanks for the knowledge Sir

@knecht105 5 лет назад

You're welcome! Thanks for watching!

@markjarman7819 5 лет назад

I love watching Colin’s videos. You have a great way about you. I had a cheap one but found it rubbish. Bought a old dewalt dw733s I t’s a great machine.

@knecht105 5 лет назад

Thanks for watching!

@knothead6436 5 лет назад

Very good !

@knecht105 5 лет назад

Thank You!

@davidcrandell1172 5 лет назад

Great video, thanks for sharing

@knecht105 5 лет назад

You're welcome! Thanks for watching!

@ponkkaa 5 лет назад

You just cured my jointer problem. Ive been putting pressure on the infeed....going to my workshop now to try this out. Thanks for posting this sir!!

@knecht105 5 лет назад

Hope it helps! Thanks for watching!

@ShaukatHakim 5 лет назад

Dear, I really appreciate your way of explaining, very thorough. On top of everything you take your precious time out and share these useful tips. Stay blessed!

@knecht105 5 лет назад

Thanks for watching!

@Bill.L.Carroll 5 лет назад

Good on you mate, more handy tips. 👍

@knecht105 5 лет назад

Thank You!

@alexandrshirinkin9941 5 лет назад

Спасибо Вам большое за советы!

@robertspina4503 5 лет назад

Great video as usual

@knecht105 5 лет назад

Thank You!

@peterjames2580 5 лет назад

Great info thanks!!

@knecht105 5 лет назад

You're Welcome!

@seagnatprepper9613 5 лет назад

thank you

@knecht105 5 лет назад

You're Welcome!

@Geopolitic157 5 лет назад

Great video on the jointer.....I would not use the floss for reasons mentioned in comments below......I have a 40 inch Starrett straight edge for that kind of purpose.... Thank you for taking the time to explain the intricacies of how the jointer works..This has made me realize and improve my own practice with this tool....All good.

@knecht105 5 лет назад

Thanks for watching!

@The_man_himself_67 5 лет назад

Thanks Colin. I guessed I must be doing something wrong. Hehe.

@ranjanty 4 года назад

Thanks Colin I was given a vintage craftsman jointer, all I had to do was buy a pulley for it. The first time I used it my 2x4 kept turning out with a bow on it. Now I know why. Problem solved.