Тёмный

Woodturning a Resin Vase 

PF Woodturning
Подписаться 30 тыс.
Просмотров 22 тыс.
50% 1

#woodturning #totalboat #resin
This week I turned a vase with Total Boat Resin and cherry wood.
Ack's Paste: www.ackswoodpaste.com
USE DISCOUNT CODE pf10 at checkout for 10% off your order
Ecopoxy Pigment (Coral):
amzn.to/33kDB6S
Starbond CA Glues
www.starbond.c....
Nova Chuck - Super Nova: amzn.to/2FgQa8J
PayPal Tip Jar- if you are interested in supporting my channel and work. Link is on PF Woodturning RU-vid home page banner, see the PayPal icon to the right.
www.paypal.com...
Wolverine Grinding System
amzn.to/37m1NXr
Branding Iron
www.etsy.com/s....
Carter and Son Bowl Gouge
Carter and Son 5/8 Bowl Gouge: amzn.to/2W5Mn3S
Easy Wood Tools Ci5 Round Negative Rake Carbide Cutter
amzn.to/2Ysy8IB
Instagram: / pfwoodturning
Facebook: / pfwoodturning
***************************************************************
to support the channel and help create more content, consider supporting via:
Patreon: / 2835716
***************************************************************
Some tools and equipment I use and recommend:
Belt sander cleaning stick: amzn.to/2L984NG
Micro-mesh pads: amzn.to/2xDBRGP
Larger Micromesh Pads: amzn.to/2HrRN44
Hut High Gloss Pen Polish: amzn.to/2JxxWB1
Woodturning Tools and Equipment:
Laguna Revo 1836 Lathe: amzn.to/2YOreMN
Robert Sorby Turning Tools: amzn.to/2Y0TA74
Carter and Son 5/8 Bowl Gouge: amzn.to/2W5Mn3S
Carter and Son Skew Chisel: amzn.to/32dj8zf
Ron Brown's Universal Setting Jig (for getting proper degrees when sharpening tools)
amzn.to/2W5HVlo
Easy Wood Tools: amzn.to/2Y1bGWE
Face Shield: amzn.to/2Fhoi4j
Center Finder (great tool): amzn.to/2W4wt9J
Bullseye Round Center Finder 10": amzn.to/2FdR19f
Wood Moisture Meter: amzn.to/2OaRqx8
Jet Air Filter for Shop - A MUST have: amzn.to/2TNE1RS
Bowl Sander Kit (I use this all the time, great product): amzn.to/2Y2wA7K
Dewalt Planer amzn.to/2FitIMD
Resin and Pigments:
Total Boat Resin: amzn.to/2XVmjKm
Total Boat Resin Quart Kit: amzn.to/2LcKPRO
Black Diamond Mica Powder Pigments: amzn.to/2XVn4Dc
Pearl Ex Powdered Pigment - Micropearl: amzn.to/2Y5BY9Z
Pearl Ex Powdered Pigment - Emerald: amzn.to/2Y0nEQl
Pearl Ex Pigments Metallics (Set of 6): amzn.to/2FdkMa7
Pearl Ex Pigments (Set of 32): amzn.to/2O7r3Ii
Easy Inlay - Mother of Pearl: amzn.to/2qmtqiB
Tuck Tape (good for resin work, will not stick): amzn.to/2ubOVRX
Porter Cable Heat Gun (To pop resin bubbles): amzn.to/2UA1GBo
Sandpaper: amzn.to/2Ff4gYc
Milliput: amzn.to/2Y4aHEP
Starbond CA Glue: amzn.to/2O6wszi
Starbond CA Glue Heavy Thin: amzn.to/2HuL1dW
Other:
Sanding Sealer (awesome stuff!): amzn.to/2u97tlY
Dewalt Orbital Sander: amzn.to/2T8TpTz
Workbench Kit (easy build and sturdy): amzn.to/2OhFXMt
Nova Chuck - Super Nova: amzn.to/2FgQa8J
The BEST paper towels for woodturning!: amzn.to/2O9Fb43
Anchorseal 2 - Green Wood Sealer: amzn.to/2HEHeeH
Montana Crackle Spray Paint - Black: amzn.to/2LD2cP6
Montana Metallic Effect Spray Paint - Black: amzn.to/2GYxJ8G
Acks Sanding Paste: www.ackswoodpa...
Milliput - Black: amzn.to/2ucLYAJ
Sandpaper: amzn.to/2Ff4gYc
Milliput: amzn.to/2Y4aHEP
Conway Air Purifier (I use this in my house, in case any allergens come up from basement shop. This thing is great, especially if you or someone you live with has any allergies)
amzn.to/2TdWXUm
Contemporary Woodturning Book (great book): amzn.to/2UFuhp9
Video Equipment:
Canon DSLR for Recording Videos (a great camera too!): amzn.to/2T7eYE5
Joby Grip iPhone Holder for filming: amzn.to/2FiNTdp
Mic Stand (I use for mounting iphone /joby grip when filming--great product and not expensive)
amzn.to/2O8cXXl
Thread adapter for mic stand (to mount iphone): amzn.to/2TeT69M
Light for filming - 18-inch ring light - dimmable: amzn.to/2Y3n4B9
More ways to follow PF Woodturning:
Etsy: www.etsy.com/s...
Instagram: / pfwoodturning
Facebook: / pfwoodturning
Twitter: pfwoodturning
~-~~-~~~-~~-~
Please watch: "Woodturning | Walnut Salad Bowl (cracks filled with resin!!)"
• Woodturning | Walnut S...
~-~~-~~~-~~-~

Опубликовано:

 

30 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 251   
@bryanmccabe3632
@bryanmccabe3632 4 года назад
nice, thanks, does the resin smell ? BM, aka, woodbutcher
@PFWoodturning
@PFWoodturning 4 года назад
Sometimes it can a bit, but not terribly.
@WolfRidgeWoodworking
@WolfRidgeWoodworking 4 года назад
Beautiful Vase and the resin color makes it look on fire. Great job Peggy! - Ed
@PFWoodturning
@PFWoodturning 4 года назад
Thanks so much 😊
@ArabianKnight7771
@ArabianKnight7771 4 года назад
Nice Work
@PFWoodturning
@PFWoodturning 4 года назад
Thank you! Cheers!
@drew.silverotter
@drew.silverotter 4 года назад
Beautiful Peggy! Awesomeness personified! Love the contrast of the Honeycomb and bronze! ✌💚 Piece out
@PFWoodturning
@PFWoodturning 4 года назад
Thank you! Cheers!
@michaelhofer9149
@michaelhofer9149 4 года назад
You are my favorite lady woodturner and you just solidified your standing with me by poking fun at yourself when you had to cut the mold away from the subject piece. I look forward to your videos every week because you take the time to EXPLAIN WHAT TOOL you are using and you show the resharpening of the tools. I wish more turners were like you and Rod Humphreys because he also EXPLAINS WHY he chose to do something a certain way.
@PFWoodturning
@PFWoodturning 4 года назад
Thanks, Mike!!!
@7come11two
@7come11two 3 года назад
A couple of points. First of all: Beautiful vase. Secondly, I don't know how you keep your hands looking so pretty, working with wood like this. And lastly; I would like to see the whole process of boring with the Forstner bit in real time, as this is my favorite part. Peace.
@PFWoodturning
@PFWoodturning 3 года назад
Good to know. Thanks!
@coreygraham5485
@coreygraham5485 4 года назад
Very nice project. I’ve only done a few resin blanks that I’ve casted myself and I’ve used cooking spray as a mould release. Works well enough.
@PFWoodturning
@PFWoodturning 4 года назад
Great idea! Thanks.
@ronaldkramer2138
@ronaldkramer2138 4 года назад
You Did a Fine Job, the Color looks great. Some day I am hoping to make something as beautiful. I did my first walnut bowl the other day still need more practice, + have to purchase something to sharpen my tools..
@PFWoodturning
@PFWoodturning 4 года назад
You can do it!
@johnveglio4433
@johnveglio4433 4 года назад
There has got to be a dust collector that can do a better job of collecting the epoxy shavings. Other than that, BEAUTIFUL JOB 👍🇺🇸
@PFWoodturning
@PFWoodturning 4 года назад
Thanks 👍And, yes, I need a better dust collector!
@MrGrahamBailey
@MrGrahamBailey Год назад
Brilliant I’m going to turn my first bowl can you send me the make and name of the polishes you used please and web site where I can buy them I live in Cyprus and can’t buy them here Kind regards Graham
@PFWoodturning
@PFWoodturning Год назад
Ack's Wood Paste. Check the link in the video description.
@davidgardner49
@davidgardner49 4 года назад
Save some of those beautiful forstner shavings and cast them in something. Bet they would be pretty. Another great video Peggy...
@PFWoodturning
@PFWoodturning 4 года назад
Thanks, David. I do indeed have some saved.... ;-)
@andrewburkholder1117
@andrewburkholder1117 4 года назад
Love your work, thanks for all the links. It’s nice to actually find some tools other turners use, and tht ive has difficulty finding. Just getting my feet wet turning, pens at the moment. Keep up the beautiful work!
@PFWoodturning
@PFWoodturning 4 года назад
Cool, thanks!
@bjwillis43
@bjwillis43 4 года назад
I've experienced the same difficulties of getting a bucket to release what is inside. Usually it is because it is drawing a vacuum. In these instances I can either punch a hole in the bottom of the bucket or else place my air nozzle on the side of the object in the seam created with me screw driver and spray compressed air down the side which will usually "pop" it out. Very nice work, as usual.
@PFWoodturning
@PFWoodturning 4 года назад
Thanks! I did try the air hose trick, to no avail. I did not punch a hole in the bottom, but that would have been a good thing to try!
@oregrown
@oregrown 4 года назад
Boy was this a welcoming video. With all the crazy crap going on right now with people reacting the way they are and the government imposing rules in certain areas, a nice PFW to at least temporarily leave the worries behind is just what I need. Thanks again for your entertaining and calming personality although you did get a little wild removing your cast bucket :)
@PFWoodturning
@PFWoodturning 4 года назад
haha! lol. I did, didn't I??
@xavierlopez2839
@xavierlopez2839 4 года назад
Great piece. Color choice was absolutely right on. Super looking vase.
@PFWoodturning
@PFWoodturning 4 года назад
Thanks!
@richardparker1699
@richardparker1699 4 года назад
Beautiful vase Peggy. The color of the resin came out just right. Have a wonderful day.
@PFWoodturning
@PFWoodturning 4 года назад
Thanks, Richard!
@christophersmith108
@christophersmith108 4 года назад
I admit I had my doubts early on, but it ended up a really quite elegant design. Very restrained, but allowing the beauty of the materials to be amplified by their juxtaposition. It would not look out of place in a Mies van der Rohe home Peace out
@PFWoodturning
@PFWoodturning 4 года назад
:-) thank you!
@gavincoyle
@gavincoyle 4 года назад
Great video loved the round of applause when you got it out of the mold really made me laugh. I love the colour of the resin, how did you get the marble effect or is that just the way it came out? Overall its gorgeous 👍👍👍 ps I hope you and your family stay safe through this world wide Pandemic 😷😷😷
@PFWoodturning
@PFWoodturning 4 года назад
Thanks so much 😊The marble effect was just how it turned out!
@joeywalker4392
@joeywalker4392 4 года назад
Great job once again on matching the resin color and the wood. The darker color makes the lighter wood stand out. It is a beautiful vase. I think taking some of the curly wood shaving and just adding resin to them would make a great looking object. I would try it but have never used resin just wood. And you seem to have a special talent for that type of turning.
@PFWoodturning
@PFWoodturning 4 года назад
Thank you so much 😀
@TimAshleyWoodworks
@TimAshleyWoodworks 4 года назад
Excellent color choice with the resin. They compliment each other nicely 🍻
@PFWoodturning
@PFWoodturning 4 года назад
Thanks!!!
@jaybeliever1479
@jaybeliever1479 4 года назад
I'm not a wood turner, but just from a design standpoint, I always find myself thinking of a different way I might have done it. It would have been nice to leave the red heartwood on there as an extra feature as you mentioned in the beginning. I really like the color of the resin. It would have gone nicely with a darker wood color as well. Thanks for the video.
@PFWoodturning
@PFWoodturning 4 года назад
Right on!
@menotu8833
@menotu8833 4 года назад
As always a great job Dear. Just asking and not trying to be one of those weirdos but I don't see a wedding ring and curious if you take it off while turning? I know some turners leave them on and some take them off. just curious for your opinion.
@PFWoodturning
@PFWoodturning 4 года назад
Hi there. You don't see one, 'cause I don't have one! :-) Thanks for watching!!!
@pbpleased7936
@pbpleased7936 4 года назад
Why not use the pressure pot? Not being critical, just trying to learn. Beautiful work! Thank you.
@PFWoodturning
@PFWoodturning 4 года назад
Thanks. Good question--- it was because I was waiting on a new air compressor (which I now have).
@thomasbrown4416
@thomasbrown4416 4 года назад
Thanks so much for the lack of music accompanying your turning! Here to learn wood turning!
@PFWoodturning
@PFWoodturning 4 года назад
Ha! You're welcome! Thanks for watching!
@paulbombardier8722
@paulbombardier8722 3 года назад
Very nice effect with the blocks of wood! I thought that the coral coloring would be more of a pink color. Nonetheless, the color is a great match with the wood.
@PFWoodturning
@PFWoodturning 3 года назад
Thank you very much!
@peterparr3003
@peterparr3003 4 года назад
Nice job Peggy, tip for the future! if you don't have mold release use some cooking oil rubbed into the mold. your project should come out a lot easier.
@PFWoodturning
@PFWoodturning 4 года назад
Cool, thanks Peter!
@jamesjappy9780
@jamesjappy9780 2 года назад
Looks great👍👌 I wonder what those flower like shavings would like in resin.
@PFWoodturning
@PFWoodturning 2 года назад
Good question!
@garythomas6866
@garythomas6866 4 года назад
Very beautiful vase Peggy, your choice of colored resin works super.
@PFWoodturning
@PFWoodturning 4 года назад
Thanks, Gary!!
@stuartsullenbarger2471
@stuartsullenbarger2471 4 года назад
Beautiful vase...love that color you used in the resin...if you don't have any spalted maple i,de love to send you a piece that you could try..
@PFWoodturning
@PFWoodturning 4 года назад
Thanks, Stuart. That is very kind. I just turned a spalted maple platter---no more after that. At least for now.
@dddriller1
@dddriller1 4 года назад
SLOW AND STEDDY WINS THE RRACE AND DONT YOU JUST LOVE ALL HE SPIDER WEBS HEHEHEH ps cool gloves
@PFWoodturning
@PFWoodturning 4 года назад
:-) Ha. Slow and steady, for sure!!!
@FuzzyScaredyCat
@FuzzyScaredyCat 4 года назад
My heart sinks when Purpleheart is used for things like that. I love that wood, difficult to get in the UK and not cheap either. Another lovely turning though.
@PFWoodturning
@PFWoodturning 4 года назад
Too bad it's so hard to get there! Sorry! Thanks for watching!
@scottgm321
@scottgm321 4 года назад
That’s really pretty. If it was here in Texas, it would be just right size for a glass of iced tea, but a vase works well too.
@PFWoodturning
@PFWoodturning 4 года назад
Ha! A tall glass of iced tea!! Thanks for watching!
@jimbugs12
@jimbugs12 4 года назад
purple heart for the waste block???? i’m not living right
@PFWoodturning
@PFWoodturning 4 года назад
Ha! It wasn't necessarily meant to be. It was going to be a feature, but unfortunately ended up being waste.
@andrewbobucky4612
@andrewbobucky4612 4 года назад
The dude over at Pohl Barn Productions uses an air compressor to blow air into his casting container to loosen things up and get the piece out easier. It seems to work well. Might be worth looking into if you're going to do a lot of resin work.
@PFWoodturning
@PFWoodturning 4 года назад
Yeah, I did try that (off camera)...with no luck!!!
@Aliceballard59
@Aliceballard59 4 года назад
You make such beautiful art. Love your videos. This is a very nice piece. Love the color.
@PFWoodturning
@PFWoodturning 4 года назад
Thank you so much!
@richarddecker8841
@richarddecker8841 4 года назад
Beautiful work (as always), but it must take forever to clean up from a resin project!
@PFWoodturning
@PFWoodturning 4 года назад
It is a pain, yes. But with good dust collection and a good shop vac, that helps!
@lazarjameslazarjames333
@lazarjameslazarjames333 4 года назад
Simple and beautiful vase... Good job... PF.
@PFWoodturning
@PFWoodturning 4 года назад
Thanks 😊
@richardarguelles194
@richardarguelles194 4 года назад
Once again another beautiful please keep doing it you look great God bless
@PFWoodturning
@PFWoodturning 4 года назад
Thank you so much!
@DiemenDesign
@DiemenDesign 4 года назад
Very nice, I'm not usually a fan of Resin, but this came out very nice, great to see you trying different things.
@PFWoodturning
@PFWoodturning 4 года назад
Thanks! Much appreciated.
@tip132
@tip132 3 года назад
Thank you. Beautiful work and very informative
@PFWoodturning
@PFWoodturning 3 года назад
Thank you!
@jamesflanary6061
@jamesflanary6061 3 года назад
Good evening, what speed do you have it turning when you are drilling out the centre with the forstner bit?
@PFWoodturning
@PFWoodturning 3 года назад
Around 400 rpms, give or take a bit.
@bryanmccabe3632
@bryanmccabe3632 4 года назад
how can you get so deep into the work ,thanks, BM, aka, woodbutcher
@PFWoodturning
@PFWoodturning 4 года назад
very carefully! :-)
@markfishburn8284
@markfishburn8284 4 года назад
This has given me many ideas for different things. The vase is very nice. Thank you for sharing.
@PFWoodturning
@PFWoodturning 4 года назад
Thanks, Mark!
@matthewphillips9455
@matthewphillips9455 4 года назад
Beautiful piece and the color tops the wood grain nicely
@PFWoodturning
@PFWoodturning 4 года назад
Thanks!
@denegillespie5767
@denegillespie5767 4 года назад
New to your channel but definitely want to watch all your work.
@PFWoodturning
@PFWoodturning 4 года назад
Awesome, thanks!!
@Woodden
@Woodden 4 года назад
Okay what happened that did not look like purple hart that you where turning off the end of vase. Color looks great
@PFWoodturning
@PFWoodturning 4 года назад
I ended up not using it, so it got turned off.
@ronjones9373
@ronjones9373 4 года назад
How much actual time goes into the turning and how many times did you stop to sharpen your tools
@PFWoodturning
@PFWoodturning 4 года назад
The turning itself was probably 2 hours. Number of times to stop to sharpen = 5
@charlesmcclure5994
@charlesmcclure5994 4 года назад
That looks amazing great job!!👍👍😃
@PFWoodturning
@PFWoodturning 4 года назад
Thanks very much! Cheers!
@gilvb51
@gilvb51 4 года назад
Very nice Peggy! I hope to try a resin/wood piece sometime. Gil
@PFWoodturning
@PFWoodturning 4 года назад
Go for it!!! Thanks for watching!
@daveb.misc.2589
@daveb.misc.2589 4 года назад
the colors of the wood and in the resin seem to work well together. very nice!
@PFWoodturning
@PFWoodturning 4 года назад
Thanks, Dave!
@johnpbh
@johnpbh 4 года назад
Yaaaaay got it out of the mould... now for the next bit.
@PFWoodturning
@PFWoodturning 4 года назад
Ha!! Right?!
@davidausten9456
@davidausten9456 4 года назад
What more can i say than another absolutely beautiful piece good colour and great shape . Looking forward to the next piece . Look after yourself and have a good day.
@PFWoodturning
@PFWoodturning 4 года назад
Thanks, David. You too!
@davidausten9456
@davidausten9456 4 года назад
@@PFWoodturning Thank you for the message I try to enjoy each day as it comes I watch all your posts but being in the (middle stages of Alzheimer's Disease) some days I find it hard to reply or comment brain goes all (foggy and confused) so it's not always possible I wish I could do all things I use to do but on good days I try to make the odd walking staff(stick/cane) and also make a lot of things out of paracor which goes to help the local help group . Please keep safe and don't forget your P S E as eye or ear damage is also not a good thing. Thank for listening to an(old fool) keep safe and KEEP UP THE BEAUTIFUL WORK .PEACE OUT.
@perry-ad
@perry-ad 4 года назад
I loved the removing-the-plastic-mold sequence. I was yelling "go, go!" at the screen.
@PFWoodturning
@PFWoodturning 4 года назад
lol. I was yelling something else.... &54#!
@billm4560
@billm4560 3 года назад
@@PFWoodturning 🤣🤣
@bulletcatcher5318
@bulletcatcher5318 4 года назад
Wow such an exotic wood used as a waste block, definitely should've used something else 😭
@PFWoodturning
@PFWoodturning 4 года назад
Yeah. I know.
@bulletcatcher5318
@bulletcatcher5318 4 года назад
@@PFWoodturning but it's OK, great work though
@bjstudent36
@bjstudent36 4 года назад
Gorgeous. Fascinating to watch.
@PFWoodturning
@PFWoodturning 4 года назад
Many thanks!
@danielparker1808
@danielparker1808 4 года назад
Wonderful job looks beautiful.
@PFWoodturning
@PFWoodturning 4 года назад
Thank you! 😊
@meme-bt7io
@meme-bt7io 4 года назад
Great color choice with that particular wood.
@PFWoodturning
@PFWoodturning 4 года назад
Thanks!
@BradsWorkbench
@BradsWorkbench 4 года назад
Beautiful job... might be cool to carve deep grooves in the wood and then fill with resin. Just an idea
@PFWoodturning
@PFWoodturning 4 года назад
That would be cool!
@LadyKatJPhillips
@LadyKatJPhillips 2 года назад
Love it! It's a coppery coral!
@PFWoodturning
@PFWoodturning 2 года назад
Yes!!!
@marknunley3317
@marknunley3317 4 года назад
I really like the color. Looks great.
@PFWoodturning
@PFWoodturning 4 года назад
Thanks, Mark! Much appreciated.
@rickeyware8051
@rickeyware8051 3 года назад
Great job it's beautiful!!!!!
@PFWoodturning
@PFWoodturning 3 года назад
Thank you! 😊
@rickeyware8051
@rickeyware8051 3 года назад
Beautiful vase great color 👍
@PFWoodturning
@PFWoodturning 3 года назад
Thank you so much 😊
@frankjimenez.c7441
@frankjimenez.c7441 4 года назад
Muy bonito la resina perfecta👍
@PFWoodturning
@PFWoodturning 4 года назад
Thanks!
@saraking9662
@saraking9662 4 года назад
Came out awesome! Did you have to stabilize that cherry 1st before casting it? Well done!
@PFWoodturning
@PFWoodturning 4 года назад
Hi Sara. No, I did not stabilize the cherry...just made sure it was dry, or under 12% moisture content. Thanks for watching!
@saraking9662
@saraking9662 4 года назад
@@PFWoodturning awesome! Just wondering because I've got a beautiful piece of spalted maple I'm going to do something like that with. I'm not going to stabilize it but I'm trying my darndest to get it as dry as possible. Thanks!
@PFWoodturning
@PFWoodturning 4 года назад
Cool, can't wait to hear how it goes!
@raymondcoggins297
@raymondcoggins297 4 года назад
Peace out another beautiful job
@PFWoodturning
@PFWoodturning 4 года назад
:-) thanks.
@Работасдеревомкакхобби
Интересно получилось. Вы молодец!
@PFWoodturning
@PFWoodturning 4 года назад
Thanks!
@harryrisso7445
@harryrisso7445 4 года назад
So simple, but so beautiful!
@PFWoodturning
@PFWoodturning 4 года назад
Thank you! 😊
@jeanshort9973
@jeanshort9973 4 года назад
Very nice , simple and elegant
@PFWoodturning
@PFWoodturning 4 года назад
Thank you! 😊
@SteveC38
@SteveC38 4 года назад
I love the color Peggy, it came out great!
@PFWoodturning
@PFWoodturning 4 года назад
Thanks, Steve!!
@mountainviewturning5319
@mountainviewturning5319 4 года назад
Very nice vase
@PFWoodturning
@PFWoodturning 4 года назад
Thanks much!
@louischambers4020
@louischambers4020 4 года назад
Lovely job princess
@PFWoodturning
@PFWoodturning 4 года назад
Thank you 🤗
@stevejones6242
@stevejones6242 4 года назад
Peggy your work is Great.
@PFWoodturning
@PFWoodturning 4 года назад
Thank you so much!
@larryzarankin938
@larryzarankin938 4 года назад
How about a little glow powder
@PFWoodturning
@PFWoodturning 4 года назад
That would be cool too! 😎
@danielparker1808
@danielparker1808 4 года назад
So beautiful Peggy.
@PFWoodturning
@PFWoodturning 4 года назад
Thank you!
@nooncraft7342
@nooncraft7342 4 года назад
very nice
@PFWoodturning
@PFWoodturning 4 года назад
thanks!!
@garrymoores9969
@garrymoores9969 4 года назад
Lovely, Nice job.
@PFWoodturning
@PFWoodturning 4 года назад
:-)
@wethreetums
@wethreetums 4 года назад
Pretty. Love the color
@PFWoodturning
@PFWoodturning 4 года назад
Thanks, Karl!
@stever746
@stever746 4 года назад
A VERY BEAUTIFUL VASE
@PFWoodturning
@PFWoodturning 4 года назад
Thank you very much!
@clarencecaudill2616
@clarencecaudill2616 3 года назад
You to verry good work
@PFWoodturning
@PFWoodturning 3 года назад
Thank you!
@marilynlefler3557
@marilynlefler3557 4 года назад
Beautiful work
@PFWoodturning
@PFWoodturning 4 года назад
Thank you so much 😀
@Charlie-pk6lj
@Charlie-pk6lj 4 года назад
So You don't like your hand arm life and that's why you wear a glove
@PFWoodturning
@PFWoodturning 4 года назад
It's a disposable glove!
@Charlie-pk6lj
@Charlie-pk6lj 4 года назад
@@PFWoodturning it's a glove. The first thing everyone should learn before using any machinery is never wear GLOVES, LOOSE CLOTHING, AND NEVER WEAR JEWELRY unless of course you don't care about your life.
@PFWoodturning
@PFWoodturning 4 года назад
I understand. thanks.
@jameslansberry5583
@jameslansberry5583 4 года назад
That's a awesome vase
@PFWoodturning
@PFWoodturning 4 года назад
Thanks for watching!
@turningwiththewoods
@turningwiththewoods 4 года назад
Love this one. My personal favorite.
@PFWoodturning
@PFWoodturning 4 года назад
Thanks very much!
@turningwiththewoods
@turningwiththewoods 4 года назад
PF Woodturning I’m waiting for my acks pastes. Thx
@Blueboy9055
@Blueboy9055 4 года назад
Really nice vase!
@PFWoodturning
@PFWoodturning 4 года назад
Thanks very much! Cheers!
@Banshee350speed
@Banshee350speed 3 года назад
Love the 3 stooges moment 😂 been there done that 😂
@PFWoodturning
@PFWoodturning 3 года назад
Right?! Thank you!
@Banshee350speed
@Banshee350speed 3 года назад
I think alot of us have had one of those moments in woodturnig, when it takes less energy to laugh rather than get frustrated..
@clarencecaudill2616
@clarencecaudill2616 3 года назад
Another good one
@PFWoodturning
@PFWoodturning 3 года назад
Thanks again!
@raziel3726
@raziel3726 4 года назад
Craftswoman!!
@PFWoodturning
@PFWoodturning 4 года назад
Thanks for watching!
@booyaa1851
@booyaa1851 4 года назад
Very nice my dear 👍
@PFWoodturning
@PFWoodturning 4 года назад
Thank you so much 😊
@jillcoleman5349
@jillcoleman5349 4 года назад
Great color!
@PFWoodturning
@PFWoodturning 4 года назад
Thanks!
@meme-bt7io
@meme-bt7io 4 года назад
Beautiful!!
@PFWoodturning
@PFWoodturning 4 года назад
:-)
@georgepauselli769
@georgepauselli769 4 года назад
Fantastic x
@PFWoodturning
@PFWoodturning 4 года назад
Thanks!
@saint5345
@saint5345 4 года назад
Awesome job
@PFWoodturning
@PFWoodturning 4 года назад
Thank you! Cheers!
@johnwallace4408
@johnwallace4408 4 года назад
Peggy, I like this turn!!! The color is absolutely stunning. The color of the RESIN is perfection. The turn COULD NOT be any better!
@PFWoodturning
@PFWoodturning 4 года назад
Thanks, John!!!
@helenburke9507
@helenburke9507 4 года назад
Absolutely Stunning!!!!!! Love the colors and translucent effect.
@PFWoodturning
@PFWoodturning 4 года назад
Thank you so much!
@ACKSWOODPASTE
@ACKSWOODPASTE 4 года назад
Wow, thats really nice!! Your colored resin and the cherry really compliment each other!!
@PFWoodturning
@PFWoodturning 4 года назад
Thanks very much! The Ack's make it look great too!!!
@stuartscott9646
@stuartscott9646 4 года назад
Pretty!
@PFWoodturning
@PFWoodturning 4 года назад
Thanks, Stuart!
@TimAshleyWoodworks
@TimAshleyWoodworks 4 года назад
16:33 where did you get the scalloped sanding pads? I've been looking for those!
@PFWoodturning
@PFWoodturning 4 года назад
Woodcraft. :-)
@glenpiro313
@glenpiro313 4 года назад
Beautiful piece. I just began messing around with some resin, Im a big fan so far. I also received my first Carter and Sons gouge, and Im slackjawed at the quality of the tool, and how well it works. I also took the plunge into the Acks sanding and polishing pools, and Ill tell you what, that stuff is well worth the money!!!!! I blame you for both lol!!!
@PFWoodturning
@PFWoodturning 4 года назад
Ha! Thanks, Glen. Yes, I highly recommend both--they are very high quality!
@johnpbh
@johnpbh 4 года назад
The wood is a lovely warm colour which is highlighted by the collar of resin around the top. I really like the idea of there being a mainly wood based vase with the resin around the top. Again, something just a little different from Peggy. Thanks for that.
@PFWoodturning
@PFWoodturning 4 года назад
Thanks. Yes, I thought that wood on bottom (primarily) and resin on top would look good.
@mrbodawg
@mrbodawg 4 года назад
Great Vase!
@PFWoodturning
@PFWoodturning 4 года назад
Thanks!!!!
Далее
Woodturning a MAPLE BOWL and Adding COLOR!!!!
16:34
Просмотров 25 тыс.
Woodturning | Resin and Amazing Figured Burl Vase
15:29
Почему?
00:22
Просмотров 344 тыс.
КОТЯТА В ОПАСНОСТИ?#cat
00:36
Просмотров 1,7 млн
Woodturning a Maple Log to a Bowl
12:29
Просмотров 10 тыс.
Woodturning the Gemstone Bowl (Gemstone in Finial)
16:55
Woodturning:  Texas Ebony
15:14
Просмотров 1,1 млн
Woodturning a Maple Bowl with CLING WRAP!
15:01
Просмотров 57 тыс.
Woodturning: Scrap Wood to THIS!!!
9:54
Просмотров 33 тыс.
Woodturning, Glue Up and Milliput, Oh My!
15:16
Просмотров 25 тыс.