Woodturning a Tri-Corner Walnut Bowl

Подписаться 27 тыс.

Просмотров 18 тыс.

50% 1

This was my fisrt attempt at woodturning a tri-corner bowl from a cube. I used my last piece of 8/4 walnut scrap to make this piece. Even though I had some issues with the pressure pot, I am very pleased with how this piece turned out. I was a little nervous about turning a cube mounted on the corners, but in the end I was nervous for no resean. This was a fun piece that pushed the limits of my comfort zone. After seeing the finished product in my hands, I have some better ideas for how I would make this style piece next time. As always, thank you for watching and I hope you have a wonderful day!
Scott
Product links
Affiliate links are used when possible and I may receive a small commission.
Superclear epoxy resin
www.superepoxy...
5% off coupon code-SQUAREANDLEVEL
superclear epoxy partner
Eye Candy pigments 👁️
bit.ly/48vZNLf
Simple woodturning tools
www.simplewood...?bg_ref=gkr80FMJN5
Acrylic Resin Roughing, Turning, Simple Scraper Set of 3
(These 3 tools are my go to favorites, you will not be disapointed!) www.simplewood...
Simple hollowing system with laser kit
www.simplewood...
Clean Armor 700 interior gloss UV finish
mywoodcutters....
UV light for curing finish (Amazon)
amzn.to/3WsUd8m
All music is courtesy of epidemic sound
#woodturning, #woodworking, #resin
‪@superclearepoxy‬ ‪@EyeCandyPigments‬

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 96

@squareandlevel 7 дней назад

@WoodworkingTop535 7 дней назад

Thank you for sharing

@ralphgraler4223 7 дней назад

Thank you for presenting your woodturnings... highend!!! That's more than comfort zone... that's special arts!!!

@Tom-hz9oc 5 дней назад

Mistakes or not, you made a beautiful bowl. I love watching and learning from you. Hopefully I’ll learn from my own mistakes.

@munzdik 3 дня назад

Браво и огромное спасибо от всего сердца за Вашу Красивую Художественную Работу! Смотреть как Вы работаете и творите Чудеса это лекарство для Души человеческой! Ещё раз огромное Вам спасибо! Жду с нетерпением следующие Ваши художественные работы!

@hartwandzelt 7 дней назад

Who never make mistakes, learn nothing for the life.

@tripped42 7 дней назад

As a carpenter, learning to be a craftsman I know mistakes are the best way to learn and improve my craft. Problem solving leads to so many new ideas. Keep it up mate. You are inspiring.

@Charlielizard 7 дней назад

Mistakes happen at the worst possible time; however, I see nothing but a piece of art that deserves its own pedestal in an art gallery. What an epic piece you crafted. Am still in awe at your creativity.

@squareandlevel 7 дней назад

Thank you so much. I really appreciate it. Hope you have a wonderful day. Scott

@Charlielizard 7 дней назад

@squareandlevel Scott, I truly appreciate your creativity and craftsmanship and wish you and yours a blessed week. Really thank you for sharing your video with us.

@GlennMartinPhotography 7 дней назад

Scott, the videography here is just superb!!

@squareandlevel 7 дней назад

Luckily this guy helped me out setting up my camera and gives awesome camera advice on his channel. Thanks for everything mate. Hope you have a great day.

@GlennMartinPhotography 7 дней назад

@@squareandlevel you're more than welcome. Can't wait for the next video

@glennsoucy9767 7 дней назад

What I love is being 75% through the video, and having no idea what the end result will be!

@nicktodoroff7836 7 дней назад

Glad to learn that I'm not the only one!!!!!!😁

@frankmurphy2776 6 дней назад

I understand why you say "mistakes were made" but seeing what you've done I can't help thinking that one person's "mistake" is another's object of beauty. Thanks for sharing! 👏👏👏👍👍🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿

@squareandlevel День назад

I appreciate that!

@dirtfarmer7472 5 дней назад

Okay you made a mistake, it worked out fine & you made a nice video, that’s 2 birds with 1 stone. Can’t beat that even with a stick. Thank you Sir

@Sugar3Glider 7 дней назад

0:20 that filing angle makes it look like you're trying to wiggle your hand to the side of the blade o.o I'm sure it's above the blade but looked dangerous 😅

@Tblanktim-mu1bh 7 дней назад

Beautifully done. I sure wish there was an easy way to save all that offcut. The grain in that Walnut pops.

@againstthegrain147 7 дней назад

Change the title! Mistakes are relative but the 'mistake' you talk about made no difference at all.

@lolcec81 7 дней назад

Комментарий в поддержку канала и ролика, а также труда мастера.

@AmyAnderson-fields 7 дней назад

There may have been mistakes, but I think that's one of the most beautiful pieces you've made. Absolutely love it!

@BlueTurtleStudios 7 дней назад

You did good. Love the finished shots, very creative. Also It does look so awful when it first starts spinning with that weird air gap turning. I know you were thinking- is this what I really want to do? great video

@squareandlevel 7 дней назад

Thank you sir. Much appreciated . Have a great evening Barry.

@davidpickens3117 7 дней назад

OUTSTANDING JOB. How does a person go about acquiring a piece of your work

@squareandlevel 7 дней назад

Thank you! It is much appreciated. In the works to hopefully sell some pieces next year. Thanks for watching. I hope you have a wonderful day. Scott

@84deeanne 7 дней назад

Beautiful piece of art !!! Larry USA

@squareandlevel 7 дней назад

Thank you Larry, much appreciated. Hope you have a great day! Scott

@FRBPturning 7 дней назад

Beautiful piece and nice camera work!

@squareandlevel 7 дней назад

Thank you very much! I really appreciate it. Hope you have a great day! Scott

@coolabahwoodworking 7 дней назад

This video was one if not the best one I have seen from you. What an amazing project. Every shot was just 🤤🤤🤤🤤well done!

@squareandlevel 7 дней назад

Thanks Tom. This one was fun. Have a great day sir!

@coolabahwoodworking 7 дней назад

@@squareandlevel you too man!

@ralphgraler4223 7 дней назад

Your woodwork is allways absolutly amazing!!! Only: your blue epoxi allways and allways!!! Sad and boring... thought... yeah... silver... great... and... what happens: blue again.... and so everything is blue!!! 😮

@FLATSWISS 7 дней назад

Good to see and hear the voice of the genius, another masterpiece… peace

@dame_nation 7 дней назад

Wow. I admire your dedication, focus and patience on this piece. It paid off. beautiful end result, I love the shape. 👍👍👍

@squareandlevel День назад

Thank you very much!

@bearsha 4 дня назад

Интересно, красиво. Одного жаль-много ореха ушло в отходы. И не совсем понятно, то что вроде бы нарезал кубики, а складыаал параллелепипеды

@jayscott306 7 дней назад

Great results! I'm glad it worked out so well, thanks to your skilled repair. I have never been able to get my pressure pot to hold properly to the point that when I used to cast I would leave my compressor on and the regulator set so that it had unlimited reservoir of air until it had cured.

@dtork47 7 дней назад

Very nicely done and finished, despite the pressure failure. I have not tried the cube either, thanks for the inspiration as always. Stay safe.

@stlwoodworking 7 дней назад

Awesome as usual my friend!

@squareandlevel День назад

Thank you!

@RaynaBArt 7 дней назад

I really enjoy watching your videos! Sooo creative.

@squareandlevel День назад

Thank you so much!

@Wood_working_saifi 5 дней назад

I also do the same work, it is a good training work, I like this work very much, I also have a channel like this blog

@meade5267 6 дней назад

Mistakes be damned...I want one😊. Absolutely beautiful.

@alancole6912 7 дней назад

It turned out great! Thanks for sharing

@squareandlevel 7 дней назад

Thanks for watching!

@msmith2961 4 дня назад

Seeing that cube spin up for the first time, and taking the first bites fills me with nope 😬

@AmyAnderson-fields 7 дней назад

And the moral of this story is, next time you clean and reseal the valves on the pressure pot, test the seals before using the pot.

@jaydee5447 5 дней назад

Well, if mistakes were made it is certainly difficult to tell. Absolutely beautiful piece.

@alexondi5234 7 дней назад

I really enjoy your work and videos. Make more!

@squareandlevel 7 дней назад

More to come! Thanks for watching. Hope you have a wonderful day! Scott

@joanedwards9380 7 дней назад

I love it 😍

@ragnarironspear1791 7 дней назад

Beautiful work as always 👏🏻👏🏻👏🏻👏🏻🇬🇧

@squareandlevel 7 дней назад

Thank you so much 😀

@TurninonTulsaTime 7 дней назад

Outstanding Sir. Beautiful Walnut. Blue was a great choice and the resin is understated, doesn't overshadow beautiful wood. Amazing work. I'd be interested in this piece if you ever decide to market them. Thanks

@squareandlevel 7 дней назад

Thank you very much! I’m hoping to sell pieces next year still working out the details. Thank for watching. Hope you have a wonderful day. Scott

@paulplager9498 5 дней назад

Mistakes may have been made, but it turned out great. I like the effect of the resin.

@beverlym5465 6 дней назад

It’s amazing! So beautiful! Loved the music too. ❤

@c.a.chambers68 7 дней назад

This is absolutely gorgeous 💙 it!

@squareandlevel 7 дней назад

Thank you so much!!

@danwalters987 2 дня назад

Amazing work!! I’m blown away by your craftsmanship! What was the tool you were using right after you added the pigment and CA glue midway through the video?

@squareandlevel День назад

Thank you! That was the simple scraper with a negative rake carbide insert. There is a link in the description. Thanks for watching. Hope you have a great day.

@nabilghosn7981 7 дней назад

Absolutely love it, thank you

@squareandlevel 7 дней назад

Glad you like it! Thanks for watching. Hope you have a wonderful day. Scott

@dang6832 6 дней назад

Mistake my a…… Great looking bowl or whatever anyone wants to call it.

@carolineecou 2 дня назад

I'm glad you were able to salvage this piece. Looking at the finished project, you would never know you had an equipment issue. Nice.

@squareandlevel День назад

Thank you!

@johnbrereton4756 6 дней назад

A true craftsman overcomes and adapes. Fantastic work.

@scottfonner 7 дней назад

Haven't ventured there.......yet. Very pretty piece, well done!

@jimrosson6702 17 часов назад

Wow that turned out amazing great job

@rustienielsen6803 5 дней назад

Very nice. I wish more of the silver showed through.

@nicktodoroff7836 7 дней назад

WOW Scott. The videography, background music and finished product were all superb! 👍👍👍👍

@squareandlevel 7 дней назад

Thanks Nick. Much appreciated. Can’t wait to catch up in a few months. Have a great day sir. Scott

@sturdyboneswoodworking 4 дня назад

Looks amazing Scott! Love how it turned out. The little bubble repairs just look like tiny stars in a galaxy. Well done!

@squareandlevel День назад

Thanks Cam. Was pretty disappointed when I found out all the air leaked out. In the end it makes for an interesting piece and I was able to practice some damage control. Have a great day sir Scott