Woodturning How To Apply A Easy CA Finish

Подписаться 260 тыс.

Просмотров 64 тыс.

50% 1

In this video I turned a gear shift knob out of a resin blank I got from Zac at NVWoodwerks. I turned the Walnut and Maple gear shift knobs on a live show, and waited to put the CA finish on for this video.
Thank You For Support My Channel
My Amazon store with things I used in this video and tools I use in my shop.
www.amazon.com...
Zac
/ nvwoodwerks
Bob
/ rjbwoodturner
Gear shift sizing website
www.hotrodshif...
=======================
THANK YOU FOR SUPPORTING MY SPONSORS!
Robust Woodturning Tools- www.turnrobust....
Easy Wood Tools- www.easywoodtoo...
Wood Turners Wonders- woodturnerswond...
ChefwareKits- www.chefwareki....
Starbond CA Glue: www.starbond.com/
YOU CAN ALSO FIND ME HERE:
= www.etsy.com/s...
= www.thewoodshop...
= / carljacobson
= / carljacobson68
I DO THIS FOR A LIVING, THANK YOU FOR YOUR SUPPORT!
= / carljacobson
I'M ALSO A ROBUST DEALER IF YOU HAVE ANY QUESTIONS I'D BE MORE THAN HAPPY TO HELP!
= jacobson68@yahoo.com
Music- app.soundstrip...
February Snow - Kyle Buchanan
Echoes - Adrian Walther
#woodworking #woodturning #custom #lathe #carljacobson #resin
#woodturning #woodturning #woodlathe #woodturningprojects #carljacobson

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 129

@CarlJacobson 5 лет назад

Starbond CA Glue: www.starbond.com/ use SBONDCARL15 for 15% discount off of any order

@franceshallen2478 6 лет назад

Beautiful... makes me wish I still drove a stick shift.. (almost). Love your work & videos. I'm a senior who has never done anything like this. (not considered ladylike in my youth) So even though I barely know a spindle gouge from 120 grit, I'm learning. Love the camera work, & angles, & the fact that there is not a lot of useless chatter, you just get on with it.!!! now I'm going back to watch more videos.

@CarlJacobson 6 лет назад

Thank you very much Francesz! I'm glad you're enjoying the videos.

@mrgolftennisviolin Год назад

I still drive one! I’m gonna have to turn one for my car :)

@kristophergrogan4309 5 лет назад

Thank you so much for your comment at about 4:40 - to slow the lathe way down to like 50 rpms when applying medium CA glue. I am finishing a pen with CA for the first time and was getting ripples. I've been watching videos like mad trying to figure out what I'm doing wrong. Thank you for sharing your knowledge and experience with others!

@CarlJacobson 6 лет назад

@ZacHiggins 6 лет назад

WOW! Those all turned out great, and you did a fabulous job with the CA finish. Thanks for all the plugs and sportin' the t-shirt too =D

@CarlJacobson 6 лет назад

Thank you buddy :)

@doug_1489 4 года назад

beautiful work! im a luthier and I finish my guitars with tung oil and CA glue. It little trick when you are water papering, put a few drops of washing up soap in the water.

@CarlJacobson 4 года назад

Thank you, and thanks for the tip.

@doug_1489 4 года назад

@@CarlJacobson please post more! People dont know how difficult lathe work is...you make it look easy

@CarlJacobson 4 года назад

Thank you!

@robertevans6481 6 лет назад

Those are some amazing knobs....and great shirt from Zac....have a great weekend you and Robin

@CarlJacobson 6 лет назад

Thank you very much Robert! I hope you had a great weekend too.

@MikeWaldt 6 лет назад

They both look superb Carl. great video my friend. Take care Mike

@CarlJacobson 6 лет назад

Thank you mate!

@RJBWoodTurner 6 лет назад

It looks like you've got that C/A finish lined out. Both shift knobs look amazing. Thank you for the shout out.Regards,Bob

@CarlJacobson 6 лет назад

Thanks Bob! And Thanks for all your help!!

@WithTheGrain527 3 года назад

wow that looks amazing. I think I would have completely glued myself to it.

@CarlJacobson 3 года назад

Hahaha...Thank you!!

@TheMessyStudio 6 лет назад

Well done, Carl. I've done a few resin gear shift knobs, but I actually cast the insert into the block and use a bolt with the head cut off as a mandrel... kinda like turning a bottle stopper.

@CarlJacobson 6 лет назад

Thank you Billy, thanks that's a great idea.

@ErikPeterson1 4 года назад

This really helped me figure out what I was doing wrong, thank you.

@CarlJacobson 4 года назад

Thanks Erik! I'm glad it helped!!

@homeyshlitz 6 лет назад

Beautiful Carl, I'd buy that if I had a car...maybe even if I didn't have one.

@CarlJacobson 6 лет назад

Thank you :)

@ReaperWoodworks 6 лет назад

Well, now I know what I've been doing wrong with my CA finishes LOL. Thanks Carl!

@CarlJacobson 6 лет назад

lol...Thank Bob :)

@SteveTwoodturning 6 лет назад

Awesome sausage !!! Love em Carl :-) ....... Great job man, thanks for sharing. Steve.

@CarlJacobson 6 лет назад

Thanks Steve!!

@knecht105 6 лет назад

Carl, these are outstanding ... well done buddy !!

@CarlJacobson 6 лет назад

Thank you very much Collin!!

@jorgezabala6089 6 лет назад

Vaya, Carl! Dejas en claro que no hay horizonte en el torneado. Realmente quedó de mil maravillas. Felicitaciones. Abrazo desde Montevideo - Uruguay. Sorry for my English.

@CarlJacobson 6 лет назад

Muchas gracias Jorge

@alansimpson596 6 лет назад

Thank you Carl for another great video.

@CarlJacobson 6 лет назад

Thank you Alan!!

@tiddlerfromtad 6 лет назад

Hi Carl. Very interesting and it looks like you achieved a fantastic finish. Definitely one to put on my project to do list. Great to see you using good old Yorkshire Grit - ee by gum! Cheers. Andrew

@CarlJacobson 6 лет назад

Thank you Andrew!

@AndysWerkstatt 6 лет назад

Love the mixed red one 🙂 great job.

@CarlJacobson 6 лет назад

Thank you Andy!

@ceojoe21 6 лет назад

Beautiful brother. Absolutely beautiful.

@CarlJacobson 6 лет назад

Thank you very much Joe!

@HeathKnuckles_Tasty_Timber 6 лет назад

Beautiful work brother!! That turned out really nice!!

@CarlJacobson 6 лет назад

Thank you buddy!

@glenmckelvey5952 6 лет назад

Those look amazing . Awesome job . Take care.

@CarlJacobson 6 лет назад

Thank you Glen!!

@tomasarguinzoni9022 6 лет назад

Very nice cool job 👍🏼

@CarlJacobson 6 лет назад

Thank you Tomas!

@pauldixon5729 6 лет назад

Nice job Mr C. Just need the mustang now take care. Paul Liverpool.

@CarlJacobson 6 лет назад

Thank you Paul :)

@terry2346 6 лет назад

Really nice Carl! I think my 98 Ford Ranger needs a new gear shift knob!! :)

@CarlJacobson 6 лет назад

:) Thank you Terry!!

@live2ride883 6 лет назад

I like the alumilite gearshift better, I'll have to ask Zac what he embedded in it. Great job!

@ZacHiggins 6 лет назад

Hey Brad, it was that piece of wormy wood I sent you to stabilize with the cholla. No clue what it was though, got it from Deranged Donkey on IG

@AsWoodTurns 6 лет назад

Very nice Carl. Alan

@CarlJacobson 6 лет назад

Thank you Alan!

@johncharletta7874 Год назад

Carl, Thank you so much for sharing your knowledge . Your videos are very educational. I do have a question regarding the CA glue. Do you wear any type of safety gear to protect yourself from the vapors? Is that why you have the dust collection hose set up next to your tool rest?

@CarlJacobson Год назад

Thank you so much John! Yes you should have a well ventilated area when applying any finish. I usually have the dust collector on and it's being pumped outside.

@MrDaytrack 2 года назад

Hi, Carl When you buffed; did you put anything on the buffing wheel ... cream or cutting paste or ... !? Or was it just a clean buffing wheel? Great job. Thank you. Best ... William (Hampshire UK)

@CarlJacobson Год назад

Hi William! Thank you!! I think I used the White Diamond compound.

@wakelywanderer12 4 года назад

This is an excellent video and will help my with ice cream scoops. Did not look like you were sanding with micro mesh at 1000 though.

@CarlJacobson 4 года назад

Thank you! I think it was 1000 grit cloth sand paper.

@billgardner1979 6 лет назад

very nice

@CarlJacobson 6 лет назад

Thank you Bill!

@PEPIPEPITA 6 лет назад

Tres tres beau....

@CarlJacobson 6 лет назад

Merci beaucoup!

@tawilk 5 лет назад

for the one you did the CA glue on, what grit of sanding did you have the piece before you started coating?

@CarlJacobson 5 лет назад

I sanded up to 600 grit.

@arashkhoshghadamnia376 5 лет назад

How about a flat surface? have you given it a try? or do you have a procedure to work one?

@davidbarre1931 6 лет назад

Thanks for this video Carl. I have a question. If you want a finish so brilliant as with CA on bigger pieces, whats do you think is the good way to do ? Sorry for my english... Mother Language is french

@CarlJacobson 6 лет назад

Thank you David! You can use the same process on bigger pieces too. I've seen people use a CA finish on bowls too.

@hiltsyartnstuff1142 5 лет назад

Well poop, now I want to turn a nob for my 68 Ford F250... if I can get the old one off at least lol

@CarlJacobson 5 лет назад

Ya that was the hardest part...lol

@abstract200 6 лет назад

Great video, thanks for sharing your knowledge and experience. I have one question: After the first three coats do you cut it back with all the micromesh grits as well? Thanks

@CarlJacobson 6 лет назад

Thank you Robin! Yes I cut it back, but be careful you don't want to sand off the CA.

@abstract200 6 лет назад

Your welcome, thank you so much for the response! I made a gear knob for my brother's car from Lignum Vitae and finished it with CA like in this video. It came out great, but at the end I noticed a spot at the very top had become dull. So I probably sanded it too much. :( Ah well, it's a learning process, right? So my next question is: Is the CA strong enough if it's so easily sanded off? What if you wear a ring while driving for example. Will it scratch the CA? Thanks once again. Grt Robin

@charlesreicks648 6 лет назад

So you sell the knobs without thread inserts, then you insert them after the sale. I really like the casted knob. Thanks

@CarlJacobson 6 лет назад

I think that's the way to go, but I'm working on finding a good place for the inserts.

@richthelen6135 6 лет назад

What speed do you run your Beall buffer wheels?

@CharmleysChopShop 2 года назад

How many coats of CA glue did you do total

@CarlJacobson 2 года назад

Probably 4 or 5

@juanjoel5826 5 лет назад

I have a question every once in a while the finish on my pens seems to spiderweb and crack do you have any tips for that?

@CarlJacobson 5 лет назад

Hi Juan, I haven't had that happen yet I'm not sure what causes it.

@coreybarnes6325 3 года назад

How can i turn one that would fit on my truck shifter?

@CarlJacobson 3 года назад

Here's a website that could probably help you out getting the right size. www.hotrodshiftknob.com/whats-my-shift-knob-thread-size/

@coreybarnes6325 3 года назад

@@CarlJacobson you have any tips for useing the ca glue on wood resin projects? i tried useing a thin ca glue but its like it didn't go on there correct.

@DerekCadmus 6 лет назад

How is the dust collection hose attached to your banjo?

@CarlJacobson 6 лет назад

It's my patented velcro strap lol

@KostasAnnikasDeftereos 6 лет назад

nice one carl !!! i really need to try some epoxy thanks for sharing again !!! did you have get the olive that i send you ???? you didnt tell me !!!

@KostasAnnikasDeftereos 6 лет назад

if is not came let me know so i try again !!!

@CarlJacobson 6 лет назад

Thank you buddy! I haven't gotten anything in the mail. When did you mail it?

@artsandcraftsmanship 5 лет назад

What type of chuck is that called at 0:47 that you mounted the blank to?

@CarlJacobson 5 лет назад

It's a expanding MT#2 mandrel www.chefwarekits.com/duck-call-game-kits-118/ez-duck-call-5-8in-expanding-mt-2-mandrel-woodturing-kit-made-in-the-usa-860.html

@artsandcraftsmanship 5 лет назад

@@CarlJacobson Thanks!

@bwell6863 5 лет назад

Did you use anything on the buffing wheel?

@CarlJacobson 5 лет назад

I used wax on the wheel

@limaartesao 6 лет назад

muito bom faz um vaso em 3d

@CarlJacobson 6 лет назад

Obrigado

@DT-qm6ll 6 лет назад

Carl, Did you put or can you put the CA finish on the resin one as well?

@CarlJacobson 6 лет назад

I've seen some people do it, but I didn't on this one.

@DT-qm6ll 6 лет назад

Thank you. I will give it a try.

@kristopherdb 6 лет назад

I have to try this! what size blank did you start with?

@CarlJacobson 6 лет назад

I started with a 3" blank for the resin one.

@AC6140 6 лет назад

What do you do to protect your late from all the water?

@CarlJacobson 6 лет назад

All Robust lathes are stainless steel, so you don't need to worry about it :)

@AC6140 6 лет назад

Sorry, I thought you were putting out videos to help all turners, not just Robust users. My bad.

@CarlJacobson 6 лет назад

Make sure you dry it off after you turn green wood or wet sand. A little WD40 will help too.

@jackocallaghan4340 5 лет назад

Ha I was tuning the lathe at 3000 rpm to dry it

@johnfithian-franks8276 6 лет назад

A beautiful gear knob but it looks too big to me, I don't think I could get my hand around it.

@CarlJacobson 6 лет назад

Thank you John! It's is pretty big

@billy19461 6 лет назад

How did you put the threads in the gear shift knob? Wooden one is beautiful,but I would never turn the other one.

@CarlJacobson 6 лет назад

Here's a link to the live show where I put the threads in, ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-o1BDR6DIAgQ.html

@pijnto 6 лет назад

you don't explain how to make the inserts

@louispittman2047 6 лет назад

It would be a big help tell what brand of clear epoxy to use and where to buy

@CarlJacobson 6 лет назад

Zac used Alumilite resin, here's the link. amzn.to/2yKdJ6Q

@باسلابوحسون 6 лет назад

رائع peutefll

@CarlJacobson 6 лет назад

شكرا لكم

@cvobodnoe-vremya 6 лет назад

Это супер клей?

@CarlJacobson 6 лет назад

Да, это супер клей

@cvobodnoe-vremya 6 лет назад

Carl Jacobson thanks)

@thomasharder9582 5 лет назад

That is not 1000 rpm. That's maybe 100.

@CarlJacobson 5 лет назад

It was 2000 rpm, maybe you're confused by the awesome slow mo :)

@thomasharder9582 5 лет назад

@@CarlJacobson, at minute 6:05 (based on my count roughly 120 rpm). Sorry, not meaning to be a problem but I can see how you're doing it and I love your work. You just point out that high speed is unnecessary. I usually run at close to top speed and I like to see that's unnecessary. Plus high speeds tend to want to burn the micro-mesh, so you're right to point out not to get carried away.

@CarlJacobson 5 лет назад

Oops....I meant 100 not 1000 :)