No video :(

Woodturning Inside Out 3 Stave Art Flame

Подписаться 35 тыс.

Просмотров 57 тыс.

50% 1

www.AsWoodTurns...
I had not completed a triple inside out turning for quite a while. So, after seeing Dale Dallon demonstrate an inside out flame, I had to jump back into it and incorporate the refinements I saw in his process.
Some of the refinements include:
- using CA glue dots to hold the first set of staves together
- using strapping tape for security
- cutting a groove for alignment when reversing
- rationalizing the wood preparation based on American Woodturner February 2010
Some facts:
- Board thickness(y) divided by 1.732 or thickness times 0.577 = distance to first cut(x).
- For a given board thickness(y), board width of 7 times x plus 2 saw kerfs is needed where x is the distance to the first cut.
- Subsequent cuts are 2x or y divided by 0.866 or y multiplied by 1.155
- A digital angle gauge is a great tool to set blade tilt.
Enjoy!
Blog: www.AsWoodTurns...
FB: / aswoodturns
Music: Traumerei by Shumann performed by Becky Schlappi. Used with permission.

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 91

@stewartmcmanus3991 Год назад

How pretty, I must try that.

@AsWoodTurns Год назад

Please do! Alan

@donfillenworth1721 5 лет назад

Very interesting. I’ve never seen a three stave inside-out piece before. Thanks for sharing.

@AsWoodTurns 5 лет назад

Well, now you have - universe expanded! Alan

@suzetteedwards7956 5 лет назад

I'm brand new to turning so it will be a while before I tackle something like this but saving it for something to aspire to. Absolutely beautiful.

@AsWoodTurns 5 лет назад

Keep it in mind and keep turning. You'll get there. Alan

@danceswithaardvarks3284 2 года назад

That's awesome thanks. I've been turning some dip pens which are partly 3 sided (using 3 colours of wood) and other dip pens which are round with an inside out section. The three sided inside out idea occured to me, which led me here. The flame looks amazing, so today I'll be attempting a pen with a flame in the grip (bulge in the dip pen). 16mm is the maximum diameter, so got the dread feeling already. It's amazing when I get a crazy idea how often I end up here. Thanks for sharing your knowledge.

@AsWoodTurns 2 года назад

As long as you are safe - go for it - it is only wood. Alan

@MikeWaldt 5 лет назад

A lovely result showing some masterful turning Alan. Great video. Cheers Mike

@AsWoodTurns 5 лет назад

Thank you Mike - You're gracious. Alan

@williamellis8993 5 лет назад

Really nice. Contrast with the flame is right on.

@AsWoodTurns 5 лет назад

Thank you William for watching and commenting. Alan

@lynnchance7015 5 лет назад

I prefer triple stave inside/outside turning too. This is a very nice piece. I will have to try one of these.

@AsWoodTurns 5 лет назад

Give it a try but be careful in the sawing. Alan

@Lee-qp6gf 5 лет назад

Nice turn, Allan. I like the three sides apposed to four.

@AsWoodTurns 5 лет назад

Agree - three has quite an appeal. Thank you Lee Alan

@deanthomas5466 5 лет назад

Excellent video and project. Once I have access to an appropriate saw, it's on my list!

@AsWoodTurns 5 лет назад

Well, sawing for this one is critical and must be safely done. Thanks for commenting. Alan

@alanmullock381 5 лет назад

Like the method Alan,even i understood it! Great result!😁😁😁😁👍👍👍👍👍👍👍👍👍👍👍

@AsWoodTurns 5 лет назад

Super - I guess it really is best when understood. :) Alan

@jimjakosh2506 4 года назад

Very nice process for a 3 sided Io turning. I use 3 hex shaped pieces but I'll be trying this method...less wood! Thanks, Jim Jakosh

@AsWoodTurns 4 года назад

I had not thought of hex. but yes that is probably more wood. Alan

@levismadore556 5 лет назад

Simply beautiful. Loved the comments. Levis Canada

@AsWoodTurns 5 лет назад

Thanks for watching and your comment. Alan

@mdsigners1901 4 года назад

Nice piece! I think I'll try to make one of these. Save your fingers! Use a dry sponge between your hand and the sandpaper. Should the paper slip or grab there's a layer of protection for your fingers. The sponge is stiff and gives the same support to the sandpaper as your fingers while protecting your hand. Hope this helps.

@AsWoodTurns 4 года назад

Thanks for your suggestion. Alan Stratton

@terrrywilliams3617 3 года назад

Good idea!

@CipsWoodChips 5 лет назад

Wonderful! Nicely done and presented.

@AsWoodTurns 5 лет назад

Thank you Cip. Thanks for commenting. Alan

@KrishnaMurthy-ki3ye 5 лет назад

The best of art wood work, congratulation.

@AsWoodTurns 5 лет назад

Thank you Krishna for watching and commenting. Alan

@Randorf100 2 года назад

I hope that some day I get a lathe machine, that was beautiful work

@AsWoodTurns 2 года назад

Do not wait too long. :) Alan

@barbart_ 5 лет назад

wow this was so satisfying

@AsWoodTurns 5 лет назад

Thanks for watching Alan

@cortlandhunt4721 5 лет назад

Great Christmas idea!

@AsWoodTurns 5 лет назад

Shhh! - It's not time yet for the Christmas Ornament Challenge. Alan

@tomasarguinzoni9022 5 лет назад

Beautiful piece of art 👍🏼

@AsWoodTurns 5 лет назад

Thank you Tomas Alan

@AllenOxendine 3 года назад

Thanks for sharing, beautiful Piece. Full View and Like

@AsWoodTurns 3 года назад

Thank you Allen Alan

@valeriehenschel1590 5 лет назад

Wonderful! Have not seen a 3 stave inside out before. New finial design, perhaps? Thanks for sharing his styling.

@AsWoodTurns 5 лет назад

It would be a rather large finial but possible. Thanks for watching. Alan

@dianarowland167 4 года назад

Beautiful!

@AsWoodTurns 4 года назад

Thank you Diana Alan

@MattJonesYT 5 лет назад

Amazing work!

@AsWoodTurns 5 лет назад

Thanks for watching Matt, Alan

@pascalbaryamo4568 3 года назад

Very educating! I’ll have a watch on your channel

@AsWoodTurns 3 года назад

Welcome. Alan

@georgebrill3072 4 года назад

Great job.

@AsWoodTurns 4 года назад

Thank you George Merry Christmas Alan

@uniqko 4 года назад

saya suka karya anda.....

@AsWoodTurns 4 года назад

? Translate did not work. Alan

@suzetteedwards7956 5 лет назад

Dang, first inside out I've seen. What a cool idea. Beautiful work.

@AsWoodTurns 5 лет назад

Thank you Suzette. They are a great project. Alan

@RealRuler2112 5 лет назад

FYI, if you dye from dark to light and sand back between colors, it generally looks better.

@AsWoodTurns 5 лет назад

I guess it depends on how much you sand back - Worth experimenting with. Alan

@masjabrikdiy8422 2 года назад

Good job friend

@AsWoodTurns 2 года назад

Thank you. Alan

@robertschaeffer2196 2 года назад

Buffing projects with a lot of air? I use horse hair shoe brushes. Does a great job for me. Thanks for the video. I'm glad you put it on the tube.

@AsWoodTurns 2 года назад

Great tip! Robert Alan

@mrviometal4948 5 лет назад

That is amazing! Kudos to you sir

@AsWoodTurns 5 лет назад

Thank you Abdelrahman Alan

@mrviometal4948 3 года назад

@Julien Ali yeah you are right no one cares. why would you hack your friend's account you psycho !!

@brownsuspenders7793 4 года назад

You are wicked good !

@AsWoodTurns 4 года назад

Thank you Merry Christmas Alan

@aldopospichil5126 4 года назад

Que trabalho maravilhoso! Parabéns.

@AsWoodTurns 4 года назад

Thank you Aldo Merry Christmas Alan

@stevenmason1674 5 лет назад

Very nice.

@AsWoodTurns 5 лет назад

Thank you Steven Alan

@rexoats4151 5 лет назад

Very nice. 👍

@AsWoodTurns 5 лет назад

Thank you Rex Alan

@glencrandall7051 5 лет назад

I have done several 4 stave inside out turnings but never thought about 3 stave. Yours is great. Love the flame inside. great color work It looks realistic. Now that you have done a 3 stave, what about two? Thanks for sharing.

@AsWoodTurns 5 лет назад

Two staves seem pretty chunky - I'd have to work on that to get them to look good. But, very possible. Alan

@jeffreyrood8755 5 лет назад

That's an awesome job! It's my first time seeing this technique. I'm liking this!

@AsWoodTurns 5 лет назад

I'm betting it will not be the last time. Keep watching. Thank you Alan

@stevenjobbins2600 5 лет назад

A masterclass .......

@AsWoodTurns 5 лет назад

Thank you Steven Alan

@Sam-tg4ii 8 месяцев назад

6:48 how is the gouge not going into the cavity and break the thin wood?

@AsWoodTurns 8 месяцев назад

1. Very light pressure 2. Shear cut with edge nearly vertical to wood rotation. Alan

@bertdelisle393 5 лет назад

Well done Alan, I will have make some, they would be great candidates for some surface embellishments (a la Steven Kennard). Or maybe some pyrography, or maybe both?

@AsWoodTurns 5 лет назад

Send me some pictures Bert. Great ideas. Alan

@Sea-Dog5496 5 лет назад

Hi Alan. At the first glue up, did you ONLY use the tape around the bundle and CA glue on each end? The reason for the question is I have seen others use paper between the staves so it would release easy after first cutting.

@AsWoodTurns 5 лет назад

On previous inside out projects I have used paper joints. I've also used band clamps around the bundle. In Dale's demo, he used this process and I decided to try it and see if it would work for me. It did. I think paper joints are more secure but this was adequate. Thank you Ed Alan

@terrrywilliams3617 3 года назад

First time seeing this. I’ve never done one of these but would love to try one sometime soon. Any suggestions on how to get started would be very appreciated.

@AsWoodTurns 3 года назад

Try it. but first do a search for my other inside-out videos. Alan

@robertlom1721 5 лет назад

I really liked 3 stave turning, but I didn't go to far in the schoolhouse and I'm having trouble with the math part, is there a easy way to do this. Thank you.

@AsWoodTurns 5 лет назад

Don't let math stop you. Just cut 60 degrees staves and give it a try. It will come Alan