[Woodworking DIY] Super Easy Tapping Guide - Tapping Fixture Tool 

00:42 M5 tap test
04:36 Compatibility test (combination compliance)
07:33 Optimization method
This is an idea for those who are not good at hand tapping or beginners. Please note that this is not for professionals.
It may be difficult to perform machining with perfect accuracy every time, but I think it will reduce the number of major mistakes, and if you have a drill guide, you can use it as is, depending on the conditions.
I don't use the drill guide I bought on Amazon as a drill guide because the hole is too wide, but its looseness is just right for a tap guide, so I mainly use it as a tap guide.
Yawata spacers sold at home centers have a large inner diameter, so they are not suitable for use with drill guides, but they may be useful for tap guides.
Basically, if the tip goes through and even a little bit of the tip sticks out, tapping is possible.
It is best to judge the actual machining accuracy by watching the video test. Lock it with a nut, eliminate any gaps, and simply measure the slope of the thread. I think you will be able to get good results if you refer to the tips to improve accuracy.
Tap set made in China. There are many similar products on Amazon.
ja.aliexpress....
Amazon Drill Guide
Since I purchased it quite a while ago, the link I used to purchase it has been deleted. I think you can find the same thing if you search for drill guides.
Thank you for watching.
Please rate highly and subscribe to the channel.
Translation uses Google's automatic translation. I apologize if it is difficult to read.
Thank you for the wonderful music.
-----
Song: Fablik - Dreamer
Music provided by Vlog No Copyright Music.
Video Link: bit.ly/3mYSl9C
Song: Summer Martin & AXM - Nalu
Music provided by Vlog No Copyright Music.
Video Link: bit.ly/45Xbqdt
Song: Lichu - Tuvalu
Music provided by Vlog No Copyright Music.
Video Link: bit.ly/3AHjIIQ
-----
#Tap Guide #Tapping Guide #Woodworking #DIY #Jig #Handmade #Tapping Jig #Drill Guide