Working garbage compactor truck miniature model Schörling Leach 2R 

Terriffic construction work there, I really admire the people who make these working models of rear loaders... all the detail and work that gets put into them. I absolutely love it, it goes slow, but doesn't stop it from being awesome!!!

You are not alone,I always wanted something like this to clean out my ashtray :D

please chuck some dollhouse furnature inside of that beast, maybe a doll or small stuffed animal too

Ok! So both the cylinders and the valves are custom? Normally leimbach valves operates at 10bar. Do you know how many bar yours operate at? I am well on the way of building a metal refuse truck of my own and It would be very nice to get some more power out of it!

Nice compactor indeed. I'd also like to see a minature Rotopress in action.

From the description, my guess would be it breaks it with 88 kilos of force, then rips the broken digit from your hand with a further 88 kilos of force. Hydraulics are NOT to be messed around with.

What kind of hydraulics are you using? 88kg is way more than for example leimbach hydraulics can handle!

Sieht wirklich echt gut aus und funktioniert auch noch :-D Saubere Arbeit, weiter so! Greetz FaTu

good for an iphone challenge! in stead of 'will it blend', ' will it crush'. 😆

I have a small panel with button controls, it was made from a servo control for RC models. This operates the control valve inside the truck.

I like that now i want one!

Nice! I want one!

@MrMalzahn ich hab auch einen aber aus lego gebaut mit den ganze pneumatik zylindern undso da funktioneirt auch allles alleine halt nur pneumatisch . der drücker ist voll fuktionsfähig, die klapppe geht pneumatisch auf und ne pneumatische schubwannd ist auch drinne: auch allles eigenbau aber hat leider nicht so viel presskraft wie deiner hier aber sehr schönes modell

Ya need to get those flashers workin'! Someone could plow right into the back of the thing while you are loading, dammit! And get your gloves and hard hat on!

Ohhhhh the memories

Could you possibly make a video of it crushing a few diapers filled with water

Where can I get one of these?

nothin escapes a leach ! not even in minature !

dont you know never stick your fingers into an open hole

If I wanted to make something close to this or any RC truck, what type of tools I would need and plus materials?

sorry, this one is not for sale. I would build another one, but I think it is way too expensive.

can you do a video of it ejecting the material

@MrMalzahn da darf mann aber nicht den finger zwischen haben :OO haha geil ich will auch son ding haben genial ist das wie viel kosten hatte das matrial für den bau?

God Bless America

Whee can I get one of these things?

@123jefm I don't know about your budget, but the materials alone are worth a few thousand dollars without man hours. But I will help you if you want to make your own one.

where did u get it from i want 1 to i was watching taht 1 for 1 year since that i try to get 1 please send the internet site in link please i begin you

Could you make me one? I would be willing to pay as much as you want! This is SSSSSSSSOOOOOOOO NEAT!!!!!!! I would REALLY love to have one of these! I would just want one like this and then I would put teh chasis on. I just don't know ho to make the body and hidrolics. Or could you send me a message telling me the instructions?

What happends if you put your finger in there ? And are you selling any of these?

how did you build it

MrMalzahn hast davon Baupläne die du öffentlich machen würdest.

what are the materials to make this thing? and how did you do this?

could this crush say a sneaker?

cool! da nicht den finger reinhalten :P

just posted a new video in my channel where you see tins being compacted

GENAU, STECKDOCH MAL DEINE FINGER REIN!!!

please check the report linked in the video description for further information

men tu basurero no tiene llantas xdxdxdxd

that is true. you empty it by opening the rear wall.

how do you countrol the packer?

wie viel kraft hat der eig

Kann man so ein Model auch erwerben und wieviel kostet es?

please check the report I made linked in the video description

@Gloomshadow I talked to Mr. Leimbach, he was very helpful, and we decided to set the pressure to 15 bar. Which truck do you want to build?

I need something larger, for my mother in law...

where did you buy the pump and the pistons?

@Gloomshadow They are custom made by Leimbach. Additionally, I raised the operating pressure of the pump.

for sale? how much?

genial

I want one.

wo haste den her ??

cool und dan mit hamburger KFZ kenzeichen

@matthewtchernev123 sorry guys, not for sale

@MrMalzahn muss erstmal machen und so aber könnte ich tuhen

its takes so long i needs the power

@basch852 Ein paar tausend waren es.

Settings - Speed - 2 - change video.....

throw in a mob rat ? try a dead mouse :P

Which control for hydraulic use for it?

where can i get one

I want one

@basch852 Lade doch mal ein Video von deinem hoch.

Where did you buy it? ;-)

kanste mir auchma einen bauen

Can i buy

What I need to built that??:)

hey hast du noch paupläne dafür? Gruß Bane852

Lucas

will ich haben

@basch852hab dir mal ne narichts gesendet kannst ja mal den link anklicken

@Cirbonukleon It comes every two weeks, why you do´t it? (Make a vid)

@jan50521 ca 80 kg presskraft

Hi:) Where can I get this powerfull electroengine and the cylinder??:)

ほしいな

@MrMalzahn i would like to buy this how much?

lo vende

Good for destroy dinky - toys !!!

B/

es de fierro por que no me gusta para nada xdxdxdxdxdxdxd

@jan50521 Eigenbau

muito daora

Y IT SO SLO

horrible song 📣📣🙉