Worlds Fastest Rusting Method !

Подписаться 43 тыс.

Просмотров 26 тыс.

50% 1

I rust a lot of metal. Hell I've made a living from rusting metal. So far this is by far the quickest method I have found for rusting metal. Once the project is rinsed and dried add the clear coat of you choice.
Thank you for taking the time to watch my video.
I am a creator of things, a metal artist, a maker of stuff, a woodworker, a welder, and a bohemian traveler of the world.
I hope to inspire, motivate, teach and be a part of the lives that seek to become creators of their own wonderful creations.
I rely solely on creating and building custom projects from metal and or wood. If there is something you would like to have created, then you can either reach out to me here on RU-vid, email me at rogueartist@artfullyrogue.com or check me out on my other social media platforms.
Good old snail mail:
16845 N. 29th. Ave #517
Phoenix, Arizona 85053
Send your stickers and I’ll return one to you.
Visit my Etsy Shop:
www.etsy.com/s...
Visit my website:
www.artfullyrog...
And follow me on social media:
/ artfully_rogue
/ artfullyrogue

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 114

@andrewhenry9530 9 месяцев назад

If you don’t get the color you want do you keep applying more peroxide? My customer wants the brown look but I have the orange rust color.

@ArtfullyRogue 9 месяцев назад

Yes, I continue to add the peroxide until I'm happy with the color. The orange rust is typically more "surface rust" over time it will go darker but by adding more peroxide you can help the process along. Typically, I'll acid wash in the morning and apply peroxide immediately after the acid. Some areas may look like their smoking which is the reaction between the two liquids. Keep spraying the peroxide throughout the day. Let it dry a bit, spray again. let it dry a bit, spray again.

@bunyanforgings7849 2 года назад

Just tried this method out. Wow! Works really fast! Thanks, boss. As to a faster method to rust metal, if it was the 1970's, l would have said, "Buy a Datsun." Cheers!

@alt34 2 месяца назад

What do you use to seal rust? Everything clearcoat I’ve used absorbs into the rust and darkens any cool color created. Very frustrating!

@ArtfullyRogue Месяц назад

I've started using a two part automotive clear that I use a paint sprayer to apply. It's a bit thicker than the off the shelf spray can of clear coat. Check with your local automotive paint supplier. I use a brand called Medallion

@davidmiller079 Месяц назад

First class, thank you, wish I could show you what I made.

@ArtfullyRogue Месяц назад

@davidmiller079 send it to my email address. I always like to see other creations

@Goalsplus 3 года назад

Thanks. 3 percent hydrogen peroxide - very important; 20 percent and it burns and burns. Rob would have been in a shower crying for hours. What percent did use with the hydrochloric acid? The swimming pool stuff is usually pretty fast on its own and great for stripping zinc off, as you know Doug. Gas mask, outdoors and all other safety procedures apply, everyone.

@ArtfullyRogue 3 года назад

Yep we just use the pool acid. And yep we'll use it to rust our zinc covered screws as well

@ChristCenteredIronworks 3 года назад

Very cool Sir thanks for posting!

@ArtfullyRogue 3 года назад

And thank you for watching Roy, its greatly appreciated

@Ericsch1 5 месяцев назад

thnx for your video man! Gotta rust a 4mm thick iron table top next week so im preparing things. I noticed 2 different kind of peroxide here, they sell 3%and 35-50% concentration. Does it matter ?

@ArtfullyRogue 4 месяца назад

Not sure it matters, I've always just used the 3% as it was readily available

@designsinorbit 6 месяцев назад

Man I bought a bunch of 8' sheets on currugated metal. I cannot get ANY rust. But I did not do any cleaning first because I have 157 pieces to do.

@ArtfullyRogue 6 месяцев назад

Spray with muriatic acid and leave it. The acid will eat the galvanization off where you spray and expose the raw steel which will then rust

@Patriot4TheTree 3 года назад

It's unfortunate that he wasn't wearing "assid" protection. It was like watching The Plumbing Channel.

@ArtfullyRogue 3 года назад

Haha thats funny, I totally missed that. I had to go back and see what you were making reference to

@annaholbrook9025 Год назад

Great video! But could you please tell me what concentrate of muriatic acid to water? I assume you're not spraying full strength? And same with the hydrogen peroxide - full strength or cut?

@ArtfullyRogue Год назад

Peroxide is 3% and the acid, I believe is full strength. I buy it from Home depot. Its the same that goes into swimming pools

@johnn8414 10 дней назад

PERFECT for my custom Birdhouse roofs !! Thank you !! It also make NEW Galvanized metal look aged if you scuff it and then do this for patchy looking metal roofs/small areas such as I do ! Appreciate You !

@ArtfullyRogue 10 дней назад

@johnn8414 thanks for your comment and support

@johnhildebrand8740 4 месяца назад

What is the concentration on the acid?

@ArtfullyRogue 4 месяца назад

I use it straight out of the bottle. I get from from Home Depot in the swimming pool supplies section.

@tonta182 Год назад

Seems i a year to late to hit the alarm bell, what ever you do don't mix muriatic acid with hydrogen peroxide indoors, then with the wrong type of muratic acid you get chlorine gas, a safer way to get quick rust is to heat the metall with a burner, make it warm not hot and then spray some hydrogen peroxide on the metal, let it do its thing, then just use water and when the metal is wet just use the burner and the oxidation will kick in quick with natural rust

@ArtfullyRogue Год назад

I've actually tried the method you mention. Unfortunately for what I'm doing its not consistent and doesn't add the character and color the acid/peroxide does

@kenstephens7366 2 года назад

I’ve been building a mobile home from scratch , all brand new BUT I wanted a rusty patina . The bottom 3 feet ole fence boards . And I found your channel. Now I can get the effects I’m looking for .after I install my thin gauge steel for my siding . Should look like a ole miners shack when I’m done . And I’ll do it out doors . LOL thanks

@ArtfullyRogue 2 года назад

Sounds like a cool project

@stankolbe6384 11 месяцев назад

Brush it on. It’s the way to keep the acid vapor to a minimum. Thank you for a great video!

@ArtfullyRogue 8 месяцев назад

Thanks for watching, it's greatly appreciated

@barryphilrush719 3 года назад

Great Video Doug, your RIGHT Robin looking good spraying the Water Feature!! Ha , Ha ""

@ArtfullyRogue 3 года назад

Thanks 👍 Barry haha

@jonmichaelroberts 7 месяцев назад

Please wear gloves if you are spraying Muriatic acid and google precaution tips.

@ArtfullyRogue 6 месяцев назад

Something I need to remind myself to do. When I'm outside the breeze usually gives you a sense that all is good until it changes direction on you.

@roweve 3 года назад

Vinegar in place of acid is almost as fast ( just seconds). But safer and cheaper

@ArtfullyRogue 3 года назад

I'll have to check that out for sure

@ArtfullyRogue 3 года назад

I just tried the vinegar in place of the acid then sprayed the peroxide....and nothing. I got zero rust and even if it creates rust over time, its still not as fast as using the acid. Is there anything specific you are doing to get a quick result?

@roweve 3 года назад

@@ArtfullyRogue dissolve a couple tsp of salt in the peroxide

@imsorryyoutube6774 2 года назад

@@ArtfullyRogue finally someone who actually checks something out when they say they will and reports back on it. Good man

@TheDannytre Год назад

@@ArtfullyRogue I also found out how to rust metal faster just using peroxide only. That’s it and it’s cheaper and safer,like you said in the beginning of the video,it’s about that Sanding and prep. Love the water fall idea.

@himandher5754 15 дней назад

Hi. Thank you for the video. I managed to get the result i want but now I want to clear coat it. I tested a small bit with my clear coat but found that it darkens and seems to eliminate that orangy brown rust look. is there a special clear coat for this rust?

@ArtfullyRogue 15 дней назад

I haven't found a clear coat that doesn't darken the rust. I have noticed that using a matte finish clear coat maintains the natural rust color better than a semi gloss or gloss clear coat.

@farscape3100 3 года назад

also good malt vinegar is good

@ArtfullyRogue 3 года назад

Yes also a good option for rust

@ickysan 3 года назад

Love this channel. I'm looking to rust out some galvanized roof panels (to give them that authentic, weathered "shanty-town"-look). Any tips on how to do that?

@ArtfullyRogue 3 года назад

Sounds cool. You'll first need to remove the galvanization before they will rust. I find that using a flap wheel and an angle grinder work best for that

@laurielund9118 2 года назад

I love watching you transform the metal into something amazing! I'm so sensitive to chemicals, I am happy you took the time to put your frustration into a video with the muriatic acid incident for our benefit, a negative situation into a positive learning tool! One slip can do major damage! Very cool, thanks. I've been trying to make some wrought iron railings cool so we'll see.

@ArtfullyRogue Год назад

Honeslty no matter experienced someone is, there will be mistakes and at least for me as I learn and I make mistakes, I'd rather share them than hide them. I prefer helping others not make the sme mistakes.

@fiftyfifty4664 3 года назад

is muriatic acid = hydrochloric acid ?

@ArtfullyRogue 3 года назад

Yes it is.

@Bootieshoecover 8 месяцев назад

NIce video. Muratic acid will cut thru galvanized however

@ArtfullyRogue 8 месяцев назад

Ah, you left me hanging. "Muratic acid will cut thru galvanized however...." What? However, what? ; ) Thanks for watching

@joemirenna6714 7 месяцев назад

nice video. Does the rust continue to happen and run off to stain a deck?

@ArtfullyRogue 7 месяцев назад

With Corten, it will continue to rust but does reach a stopping point. You can spray a clear coat sealer to slow the rust process and keep it from running onto the deck.

@kenstephens7366 2 года назад

I’ve been looking for a way to rust thin gauge steel on my new home it’s small and I’m trying to make look like a ole miners shack . Now I can . Bottom wainscoting will be ole fence boards . Guess I better cover my glass well .

@ArtfullyRogue 2 года назад

Sounds very cool

@designsinorbit 6 месяцев назад

Did you have any luck, Ken? I am struggling.

@terriebennett Месяц назад

Will this work on sandblasted corten steel as well?

@ArtfullyRogue Месяц назад

@@terriebennett yes I don't see why not. I rust Corten using this method without sand blasting

@terriebennett Месяц назад

@@ArtfullyRogue Thank you so much! They are large panels so had to blast the mill scale off. 🤪

@ArtfullyRogue Месяц назад

@terriebennett just saw your Instagram page, very cool sculptures. I'm truly hoping to turn my focus more on sculpture. I saw you did the Tucson show, was that this year? I did that one last year but couldn't make it this year.

@terriebennett Месяц назад

@@ArtfullyRogue, thank you! I started following you on IG too! Yes, I did do the Tucson show this year. It was a great show! Hoping to get back next year. Love your channel and appreciate your response to my question. I look forward to seeing you create more sculpture 😊

@IRONMANMETALBILLDANKANIS 3 года назад

Can I do this over the factory mill scale?

@ArtfullyRogue 3 года назад

Unfortunately no. You'd have to remove the mill scale first

@mrbriankeith111 Месяц назад

Definitely does not work on galvanized

@ArtfullyRogue Месяц назад

You are correct. Galvanized metal is specifically dipped to prevent rusting. It's necessary to remove the galvanization and get down tot he bare metal for this process to work

@mrbriankeith111 Месяц назад

@ArtfullyRogue i have a fountain flashed in galvanized steel 26 Guage. I took a wire wheel to it, I've sprayed it 4 times now in the sun and it only took the shine off. I can't find any information on how to remove this coating other than dipping it in acid. This is a fountain 6 feet by 3 feet. Dipping is not an option

@ArtfullyRogue Месяц назад

@@mrbriankeith111 have you tried spraying it with acid? Pool acid in a sprayer is a possibility

@mrbriankeith111 Месяц назад

@ArtfullyRogue I have with muratic acid from my pool supplies. 4 times actually and in the full las vegas sun the last 2 times. I found a company that makes a coating so I think that's what I'm going to do at this point. Removing that galvanized finish is tough.

@CasperCarver Месяц назад

I’m doing it on galvanized it’s just takes awhile.

@510BIGD Год назад

What percentage of hydrogen peroxide are you using... I'm using 3% and not getting any reaction

@ArtfullyRogue Год назад

I also use 3%. And you're using pool acid ?

@510BIGD Год назад

@@ArtfullyRogue no...strictly muriatic. Though I did figure it out. Had to take the weed burner and warm up the metal. Soon as it was good and hot I hit it with the hydrogen peroxide and bam..... instant rust. Since you live in a warmer climate it wasn't an issue for you. I needed to open up the pours of the metal with some heat. Thanks for the reply though

@designsinorbit 6 месяцев назад

@@510BIGDI had not heard of this idea. You weren't using corrugated metal by chance, were ya?

@imsorryyoutube6774 2 года назад

I will never have use for this, but very interesting nonetheless. Good tips and narration though.

@michaelwho 3 года назад

As an added safety, I’ll often have a 5 gallon bucket of fresh water and a large box of baking soda. These also are nice for a more even spaying. The green tops are for chemicals. Chapin International 1046 48-Ounce Janitorial/Sanitation Industrial Cleaner/Degreaser Sprayer

@ArtfullyRogue 3 года назад

cool thanks Michael

@kylethompson6611 Год назад

hey michael, so you'll mix big box of baking soda into a five gallon bucket of freshwater and once done with the acid and peroxide, wait a couple hours, then wash it off with said mixture to get it more uniform?

@michaelwho Год назад

The baking soda is to neutralize acid splash and spills. As is the water. Goggles and gloves when working with acid. Always add acid TO the water. If splashing occurs, it’s diluted to/with water.

@kylethompson6611 Год назад

@@michaelwho very much appreciated 👍

@bunyanforgings7849 3 года назад

You mentioned running acid washing off the rust, does rinsing with water do that too?

@ArtfullyRogue 3 года назад

I actually just rinse with water but I pour slowly over the rust as opposed to using a hose with any pressure

@bunyanforgings7849 3 года назад

@@ArtfullyRogue Thank you for taking the time to respond. Huge help. I have clients pushing for this exact type of finish. Cheers.

@rogermccaslin5963 3 года назад

I accidentally found out about the power of muriatic acid to rust things when I was a kid. We had a little metal shed in the back yard with the usual shed stuff in it (shovels, rakes, lawn mower, etc.) plus a shelf with some of my dad's tools and a bunch of fishing stuff (hooks, lures, leader wire). There was also a gallon jug of muriatic acid in there that was about half full. Somehow the bottle got a hole in it (it might have been me but really, I think it was my little brother). the hole was above the contents so it didn't leak out but a week or so of that shed in the hot Florida sun did the trick. The fumes rusted the heck out of everything that was steel based, including the shed. The humidity probably helped too.

@ArtfullyRogue 3 года назад

Oh yeah, humidity and acid, you got the double whammy

@arvindazad 2 года назад

You will go to jail now 🤣

@rogermccaslin5963 2 года назад

@@arvindazad Statute of limitations. I plead the 5th. I wasn't there, I've got an alibi.

@luisponce4187 Год назад

any recommendations on protective finish on that?

@ArtfullyRogue Год назад

I use an automotive clear that I buy from my local auto paint store. I don't have a specific brand as I get whats on sale and they all seem to do the job

@aired-downdisconnected4125 Год назад

So how did it hold up over time ? My patina on my truck , a hard rainstorm washed it back to bare metal.

@ArtfullyRogue Год назад

We've started using a two part automotive clear coat on the water features. The spray on that I used in this video did ok for about a year before it needed reapplication

@jackcraw3042 3 года назад

Would u be to use ferric chloride as the acid?

@ArtfullyRogue 3 года назад

I'm not sure

@ras8514 13 дней назад

USE 30% HYDROGEN PEROXIDE

@ArtfullyRogue 12 дней назад

@ras8514 I have and it doesn't produce much difference than the 3% and cost a bit more

@SchysCraftCo. 3 года назад

Beautiful job. Very nice video this week. Very helpful video thank you so much Doug. Keep up the great craftsmanship and hard work my friend. Fab On. Keep Making. God bless.

@ArtfullyRogue 3 года назад

Thanks Jared, you too!

@Everythings_Adjustable 3 года назад

Nice tutorial Doug 🛠️👍😊

@ArtfullyRogue 3 года назад

Thanks 👍

@ssskids123 2 года назад

Cool video and great advice for rusting! Apologies if this is covered in another video, but do you seal the rust with something to stop further rusting before installing? I’ve been hesitant to install a welded fountain for fear of it clogging the pump, but I realize now that might have been a bad assumption.

@ArtfullyRogue 2 года назад

Sorry for long delay I totally missed your comment. I typically use a two part spray on automotive clear coat

@Lazarusart Год назад

Great Video, Subbed !

@jerrywhidby. 3 года назад

I love the look of corten steel when it gets that brilliant orange. Is there anyway to arrest the rusting process, and preserve that color?

@flightographist 3 года назад

Clear coat, the sleeper auto crowd use it.

@IRONMANMETALBILLDANKANIS 3 года назад

Spray with water to stop the corrosion process and keep it at the color you want.

@ArtfullyRogue 3 года назад

Spray a clear coat over the rust. I use either a small spray can of spray or I'll mix batch for an air sprayer.

@bsebldude 2 года назад

Tried this method on a new galvanizeed corrugated roof panel. The reaction only turned the panel gray with some black spots. No rusty patina.. Did I miss something??

@ArtfullyRogue 2 года назад

The galvanized coating prevents rusting. The galvanizing has to be removed

@bsebldude 2 года назад

@@ArtfullyRogue Understood. I used the Muriatic acid 1st followed by the peroxide. Basically just dulled the surface and turned it gray ands black. No orange rust patina!

@designsinorbit 6 месяцев назад

@@bsebldudeSame here. I don't get it. I am doing everything the same way all the other people on RU-vid are with corrugated metal. Did you ever figure it out?