Worth it? MOJOTONE T Standard Solderless Harness

Подписаться 11 тыс.

Просмотров 8 тыс.

50% 1

Today's video is as raw as it gets, no scripts and no preparation! I wanted to show you exactly what it is like to install and use the Mojotone T Standard Solderless Harness. First off, I want to be upfront and say that I am no technician and do these upgrades with less than minimal knowledge of electronics. Do I let that stop me? Of course not!
Second, I opted for this specific Tele standard solderless harness because I do not have what is needed to solder anything at the moment. I'm actually not that good at soldering, which is one of the reasons why I opted for this specific kit.
I hope this video helps you, and if you are inclined to support what I do here, I have some affiliate links further down in the description of this video. Cheers
I'm a Stringjoy artist, and play their set of Broadways on all my Electric guitars.
I play the 10/13.5/17/28/38/50 on all my Gibson and Epiphone. I play the 9.5/13/16/26/36/48 on my Strat and Telecaster.
NONE-Affiliate link:
stringjoy.com/...
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!
** NOT a sponsored video. I purchased this with my own money! **
Patreon
/ the_tone_lounge
TTL Merch
shop.spreadshi...
Thomann affiliate link
MOJOTONE KIT: thmn.to/thopro...
Sweetwater affiliate link:
MOJOTONE KIT: imp.i114863.ne...
Obsidianwire Affiliate Link
obsidianwire.com?aff=13
Celestion Impulse Responses
www.celestionp...
✅ SUBSCRIBE:
/ @thetonelounge
►I upload new videos every SUNDAY!
⚡ 𝗖𝘂𝗿𝗮𝘁𝗲𝗱 𝘃𝗶𝗱𝗲𝗼𝘀:
🔴MOD Series: • GUITAR UPGRADES
🔴 AC15 series: • Vox AC15 series
#thetonelounge #stringjoy
➡️
thetonelounge3247815624350876

Опубликовано:

21 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@TheToneLounge 2 года назад

⚡ 𝗖𝘂𝗿𝗮𝘁𝗲𝗱 𝘃𝗶𝗱𝗲𝗼𝘀: 🔴MOD Series: ru-vid.com/group/PLeAo3au6SN1kIQzcI8l9MEV6fhVcFNzks 🔴 AC15 series: ru-vid.com/group/PLeAo3au6SN1mEE4I1YYC2GtP7Y9sZ4VKT

@Miss_Pixie 2 дня назад

I prefer the Obsidian and I explain you why, have more connections, once I have 4 way switch on my telecaster I have an extra ground and the ground from bridge. Mojotone only have the standard connections

@schon1972 3 месяца назад

Is it necessary to use the knobs with screws or do they make push-ons that work? Sorry, I'm a newbie. Great video though. Thanks!

@robf.7404 2 месяца назад

That Dean Markley K20 was my first amp back in 1987. It wasn't a bad little practice amp!

@rymivo4012 Год назад

Thanks for the review. What is your current feedback on the harness. Do you think soldering the pickup wires enhances the sound more than solderless? Any thoughts on the Vitamin T cap? Or did this wiring harness really sound well? Thanks again!

@TheToneLounge Год назад

It still works great. I don't think that I could hear a difference between soldered or this type of setup. A solid connect is just that; a solid connection. It passes the signal without impeding it, so it's fully functional. I don't know very much about that specific cap, so I really can not say.

@jerryverser2391 2 года назад

Smooth as butter...great playing!

@TheToneLounge 2 года назад

Thanks Jerry!

@rioace3953 Год назад

Thank you for sharing. Playing through Badcat? We're all your demos recorded through pure DI? Or mixed with mic? Thank you

@TheToneLounge Год назад

As I recall, this demo was with a simple Shure SM57. I only use DI if I intend to reamp.

@rioace3953 Год назад

Oh :-) right, thank you

@kosycat1 Год назад

Deoxit works wonders for fixing things i would try taht o nthe pot next time or if you want to reuse it and if you get some of thjat cloth tape like o nthe outside of a humbucker and wrap that around the ground wire on the output jack to seperate the hot.

@TheToneLounge Год назад

I kept the original kit, and will use Deoxit on it for sure. Right now, I am really happy with the Mojotone kit.

@bryanswift 6 месяцев назад

09:45: "The volume pot.... doesn't bleed off too much treble" 😆 Yes that's because the Mojotone wiring harness comes prewired with a treble bleed kit already soldered into place. That means that when you turn down the volume, the treble "bleeds through" which is why they call it a treble bleed. The more you know 💫

@TheToneLounge 6 месяцев назад

Thanks for the info, Bryan!

@HooksBill 2 года назад

I'm not usually comfortable doing my own mods. I took my Tele to a local shop to get some Fralin Blues Special pups put in. I have done some repairs on a couple inexpensive acoustic guitars. The last was a bridge doctor lol. Not overly complicated to do. Turned out pretty good. MoJo makes good products so I'm sure it will last a long time.

@TheToneLounge 2 года назад

I'm an idiot doing his own repairs . I have minimal understanding of electronics and I always pull through. This kit is as dumby-proof as it gets.

@faheykj Год назад

So, this is the issue I'm having with my Emerson harness, I find the pots very loose. They actually vibrate when hitting certain notes, so I'm thinking of going with a mojotone harness. You find these pots have a bit more resistance when turning?

@TheToneLounge Год назад

They are a bit stiffer in comparison to the Emerson, but it's not a huge difference.

@faheykj Год назад

@@TheToneLounge thank you

@jeffdiltz4356 Год назад

Great video man

@TheToneLounge Год назад

Appreciate it! Are you in the market for one of these?

@randallo3614 Год назад

I'm in the market for a new 4-way harness for Way Telecaster. I only am going 4 away because I have JBE modern-T pickups that were hooked up like that with my 920d controller which crapped out. Sort of like you I don't have a soldering iron and I am living in Korea right now. While your video was helpful I'm having a difficult time choosing between low pass, standard, and high pass. Aso, I assume there isn't a difference between solderless and soldered in means of tone or longevity, coming loose...etc. I guess it comes down to high pass or standard. I hate when my volume knob rolls off the actual volume too quick, too deep. I want to roll from a somewhat cleaner, prettier, software sound of what my tone is set at on 10. I want it to roll down to at least 7. And now I will also want to find a new plate as well. Any suggestions? I like your red pickguard. My Tele is black American Standard with a white pickguard. 99% of the time I could care less if my guitar is pink with a big rainbow as long as it jams. While I am moving though I am looking for something other than white. Sort of dumb because it looks fine, but I want a change. Any ideas?

@TheToneLounge Год назад

For a 4 way Tele harness, I suggest looking at either Obsidianwire or Mojotone. I don't know if the soldered vs. unsoldered connection makes any impact on the tone. As long as you have a strong connection and signal is passing unimpeded, then your tone should be fine. My pickguard is actually the original, I just used acrylic paint and sprinkled some sparkles on top. 😊