Тёмный

WPL LCG Build Part 2 - Suspension Links and Shocks 

Ready To Run RC
Подписаться 13 тыс.
Просмотров 24 тыс.
50% 1

Added the suspension links and shocks to the WPL LCG build in this video. Link to everything in this build and the past build are below:
5mm to 12mm Brass Wheel Hub Hex Adapter: amzn.to/3K5dB6f
MN86 Wheels and Tires: amzn.to/3XvcNvf
Brass Weights 12mm Hex Wheel Hub Adapters: amzn.to/3YTXbT3
Injora 1.9 Beadlock Wheels: amzn.to/3k0g7ka
AIMROCK 2-Pack 1/10 RC Crawler Aluminum Shocks Internal Spring Dampers 70mm: amzn.to/3S5IVUQ
75mm-85mm Suspension Links: amzn.to/3Z30xmg
2Pcs Vgoohobby Metal Centre Transmission Shaft Drive Shaft (80mm-100mm): amzn.to/3jVdBff
LaTrax ESC: amzn.to/3if19FQ
1.55" Injora Stamped Beadlocks: amzn.to/3igEokB
My Old Wheels and Tires: amzn.to/3H1MhkM
Servo Plug Kit: amzn.to/3BLbMFZ
Bob Smith Industries Insta Set: amzn.to/3sW1crR
Bob Smith Industries Super Glue: amzn.to/35aEwf8
30A ESC: amzn.to/3IQQB7S
Ovonic 2S 1000mah Lipo Batteries: amzn.to/3rbJ25w
Servo Plug kit: amzn.to/3s34B7D
Flysky GT2B Controller and Receiver: amzn.to/3ISCfnA
370 Motor Metal Transmission:
Amazon: amzn.to/3q483Pz
Banggood: www.banggood.c...
9g Servo:
Amazon: amzn.to/3f2nC4b
Banggood: www.banggood.c...
Servo Mount: amzn.to/33jdzVL
Metal shocks with shock mounts: amzn.to/3p2y55d
Metal suspension links: amzn.to/3p1tZdC
2.5mm hardware kit: amzn.to/3F5AnpW
I am an affiliate of Amazon, Gearbest and Banggood. This means if you purchase anything using any of the links I provide in any of my videos, I get a small commission and it helps me out with funding this channel to bring more content. Thank you to everyone who had already purchased items through my links. You are all awesome!!
Support the channel by purchasing Shirts and Merch, link to my online store through Teespring is here: teespring.com/...

Опубликовано:

 

11 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 65   
@ericsrchobby5180
@ericsrchobby5180 Год назад
Coming along nicely! Really enjoying this build so far. Keep up the good work
@ReadytoRunRC
@ReadytoRunRC Год назад
Thanks! Glad you are enjoying the series so far.
@user-be8xr3cp5m
@user-be8xr3cp5m Год назад
あなたのマシンはカッコイイ。私もWPL c14を持っているのであなたの動画を参考にさせてもらっている。
@nhansme
@nhansme Год назад
Looks awesome…very interesting build 👍👍
@ReadytoRunRC
@ReadytoRunRC Год назад
Yes it does look cool. Not sure what I’m doing so basically winging it.
@edwardlove4300
@edwardlove4300 4 месяца назад
I guess I'm missing something couldn't see the brackets in your build list. I have little L type brackets that have the 2.5mm hole for shocks on one end and a flat side that I'm thinking could go into the leaf spring holes? I give it a try. Thanks
@donm1547
@donm1547 Год назад
Way cool stuff, RTR.
@ReadytoRunRC
@ReadytoRunRC Год назад
Glad you like!
@naelrc4583
@naelrc4583 Год назад
Awesome mod work on your wpl my friend! Really enjoy watching. Liked & subbed! Keep up the good work😁👍🏼
@ReadytoRunRC
@ReadytoRunRC Год назад
Thank you! I have some more with this build on the way.
@naelrc4583
@naelrc4583 Год назад
@@ReadytoRunRC Looking forward to your update for this wpl my friend😁👍🏼
@ramsessilent
@ramsessilent Год назад
Looking 👍
@orangkreatif3614
@orangkreatif3614 Год назад
nice...SEE
@ReadytoRunRC
@ReadytoRunRC Год назад
Thanks
@IowaBudgetRCBashers
@IowaBudgetRCBashers Год назад
I’m following this to the end brother. Giving me ideas for mine
@ReadytoRunRC
@ReadytoRunRC Год назад
Thanks for coming along on this ride so far.
@wrc_adventurehobby5242
@wrc_adventurehobby5242 Год назад
Very nice 👍👍
@ReadytoRunRC
@ReadytoRunRC Год назад
Thanks!
@shaunwilliams4327
@shaunwilliams4327 Год назад
Hi what was the length of the links after you adjusted them from 75 and 85
@TW39
@TW39 8 месяцев назад
Is there away to use 110scale tc wheels on those diffs
@edwardlove4300
@edwardlove4300 4 месяца назад
Can you please tell me what hardware you used to attach the lower shock mounts to the axels?
@farhanfaiz1998
@farhanfaiz1998 4 месяца назад
Are u talking about the link?
@ReadytoRunRC
@ReadytoRunRC 4 месяца назад
I used 2.5mm screws. The kit I have is linked in the video description
@maxdeniel
@maxdeniel 6 месяцев назад
Hey, great video, I bought some metal upgrades around 3 years ago, and I abandoned the project and I want to start it again. I forget how complicated some little details are. Thanks for you videos. I'm interested on the set of tools you use at 2:22, I have the Philips screw driver but I need to get one of those hex socket.
@ReadytoRunRC
@ReadytoRunRC 6 месяцев назад
Glad you used my videos for some help. It’s just a basic set of dynamite tools. Here’s a link for it. amzn.to/48DRgFZ
@maxdeniel
@maxdeniel 6 месяцев назад
@@ReadytoRunRC Thank you very much, already added to my cart.
@ReadytoRunRC
@ReadytoRunRC 6 месяцев назад
@@maxdeniel awesome! Hope your build goes good.
@OgPumpkinSlayer
@OgPumpkinSlayer Месяц назад
Hey mate, nice build. Just curious did you use loctite when spinning the lower links out? Mine seem to come loose easily :)
@ReadytoRunRC
@ReadytoRunRC Месяц назад
@@OgPumpkinSlayer thanks! Yes I put some on. I had the same problem with them spinning themselves.
@OgPumpkinSlayer
@OgPumpkinSlayer Месяц назад
@@ReadytoRunRC legend! I'll be adding some this arvo then :)
@Flipside_Crawlers
@Flipside_Crawlers Год назад
I love these cars, got 2 for my boys but this build series made me get one. How to you get the brass adapters on? You got metal but mine are plastic axles and they definitely didn't want to go on. maybe mine are super cheap but it's literally hex peg in round hole. Nice build ill be watching
@ReadytoRunRC
@ReadytoRunRC Год назад
Thanks. Glad you are checking out the build. The adapters have 2 grub screws that you tighten on the flat part of the hex axles. So even though the hole is round you still tighten to a flat side of the axle preventing the axle from spinning inside the adapter. Don’t forget loctite or the grub screw will keep loosening up.
@sembilang8278
@sembilang8278 Год назад
U can try using mn78 driveshaft..it was longer than mn99/wpl..
@ReadytoRunRC
@ReadytoRunRC Год назад
Yeah I just looked those up and they would work too. I already ordered 1/14 scale Tamiya drive shafts and will be putting them on this weekend since they just got delivered.
@zozoxgames
@zozoxgames Год назад
Superb bro...auto sub
@ReadytoRunRC
@ReadytoRunRC Год назад
Sweet. Thanks for the sub. Appreciated l!
@nathanbegay4095
@nathanbegay4095 9 месяцев назад
What size shocks did u use
@ReadytoRunRC
@ReadytoRunRC 9 месяцев назад
70mm
@cisandi9613
@cisandi9613 3 месяца назад
Pakai linkrod apa itu
@anthonyesquivel5863
@anthonyesquivel5863 Год назад
how about a spacer to move that shock out a little to clear the shock body?
@ReadytoRunRC
@ReadytoRunRC Год назад
I’m flipping the shock upside down to be able to mount it as close as possible to the mount and also putting most of the weight of the shock down by the axles.
@anthonyesquivel5863
@anthonyesquivel5863 Год назад
@@ReadytoRunRC I see you got away from coilovers too. Was that to keep it close to the frame or better performance from the other shocks?
@ReadytoRunRC
@ReadytoRunRC Год назад
@@anthonyesquivel5863 it’s actually for looks. I liked the look of the internal spring shock but the ones I put on did end up being better than my other shocks.
@richbuilt5786
@richbuilt5786 Год назад
Where do I get those links from?
@ReadytoRunRC
@ReadytoRunRC Год назад
From the link in the video description
@khairulhasif8640
@khairulhasif8640 Год назад
Wow.. What is the length of the shock
@ReadytoRunRC
@ReadytoRunRC Год назад
70mm
@edwinnepomuceno5177
@edwinnepomuceno5177 Год назад
How much did all of that cost?
@JAMESF655
@JAMESF655 Год назад
Mine cost about 200 to build
@vhrte49
@vhrte49 Год назад
Where did you get the links bud?
@ReadytoRunRC
@ReadytoRunRC Год назад
Link for the links is in the video description
@vhrte49
@vhrte49 Год назад
That's a link for the red ones
@ReadytoRunRC
@ReadytoRunRC Год назад
@@vhrte49 ok. For some reason that was one I missed. I updated it now.
@vhrte49
@vhrte49 Год назад
@@ReadytoRunRC Cheers mate🙂
@geokiller789
@geokiller789 Год назад
@@ReadytoRunRCive checked and its not updated
@RAKS_HoneyBadger
@RAKS_HoneyBadger Год назад
Man you think I could get those old links 🤣🤣🤣🤣
@ReadytoRunRC
@ReadytoRunRC Год назад
If you’re in the US email me readytorunrc.rtr@gmail.com and let me know where to ship them. I got you.
@RAKS_HoneyBadger
@RAKS_HoneyBadger Год назад
@@ReadytoRunRC okay I will thank you man
@ReadytoRunRC
@ReadytoRunRC Год назад
@@RAKS_HoneyBadger yep no problem. Just got your email.
@RAKS_HoneyBadger
@RAKS_HoneyBadger Год назад
@@ReadytoRunRC 👍 sounds good I'm really excited so far iv bought axles wheels and recently spent alot of money trying to buy certain paint color for it so this will definitely help the build tremendously
@Stodgyaban_
@Stodgyaban_ 2 месяца назад
What’s the length of wheelbase with this setup?
@ReadytoRunRC
@ReadytoRunRC 2 месяца назад
@@Stodgyaban_ I have no idea. I changed it since I made this video.
@Stodgyaban_
@Stodgyaban_ 2 месяца назад
@@ReadytoRunRC its okay. Thank you for the reply. Have a nice day sir 🙂
@ReadytoRunRC
@ReadytoRunRC 2 месяца назад
@@Stodgyaban_ sorry I couldn’t help. Thanks for watching the video. Have a nice day too.
Далее
Ⓜ️ WPL C24 Metal Upgrade 100% Part1
17:25
Просмотров 142 тыс.
Вопрос Ребром - Булкин
59:32
Просмотров 786 тыс.
iPhone 16 - презентация Apple 2024
01:00
Просмотров 62 тыс.
WPL C14 Upgrades Part 2 - Shock and Link Upgrade
7:06
Ⓜ️ WPL C24 Metal Upgrade 100% Part 2
14:45
Просмотров 95 тыс.
WPL TOYOTA Crawler full custom build
8:20
Просмотров 32 тыс.