Wristwatch Restoration & Repair | Reviving 3 Forgotten Quartz Watches

Подписаться 6 тыс.

Просмотров 11 тыс.

50% 1

25 Years in a Drawer - 3 quartz wristwatches from the 1980’s… Let's get them running!
Watch Part 2.) Replacing a Quartz Movement in a Wristwatch | 1980's Seiko Dress Watch - • Replacing a Quartz Mov...
In this watch repair & restoration video I show how to disassemble, clean, troubleshoot and revive 3 vintage quartz wristwatches from the 1980’s. Not everything went as planned!
-------------------------------------------------------------
Watchmaking tools and supplies used in this video (Amazon Associate product links):
Digital Caliper 0-6" Millimeter/Inch/Fraction amzn.to/3kgs1Gx
Simichrome All Metal Polish amzn.to/3IMMDQP
Silicone Soldering/Work Mat amzn.to/3k0OnrS
Camera Cleaning Blower Kit amzn.to/3EtO4PU
8-pc Micro Precision Screwdriver Set amzn.to/3jTnJBm
Watch Hand Remover Lever Tools amzn.to/36uECz9
Bergeon Rodico Cleaner Putty amzn.to/3xGOwsQ
14-pc Precision Tweezer Set amzn.to/3JZKPAM
Watch Oiler Pen/Cup Set amzn.to/3k0S54M
Ultrasonic Cleaner Baskets - Small amzn.to/3Ez0g1H
Watch Movement Holder Set amzn.to/3M9HMHU
Molykote Grease amzn.to/3VFoVJJ
Small O-Ring Rubber Watch Back Gasket Set 12mm-30mm x .5mm amzn.to/3IBfiZ1
Big O-Ring Rubber Watch Back Gasket Set 31mm-40mm x .8mm amzn.to/3ZrdbNA
WATCH with Mike is my journey into watchmaking and watch repair. Please subscribe for lots more watch repair DIY videos.
Follow me on Instagram: @watch.with.mike
Index:
00:00 Introduction
00:21 removing & measuring for new watch bands
03:09 special guest appearance
03:47 preparing parts for the ultrasonic cleaner
04:10 uncasing the watch
06:15 dealing with a corroded battery
09:35 polishing the watches
11:14 measuring for new case back gaskets
11:25 installing a new battery in a quartz movement
11:46 installing rubber watch back gaskets
14:22 closing a watch using a watch back press
15:21 2 of 3 watches complete!
15:51 HUGE problem with the new movement!!!
17:31 tearing apart a quartz movement - montage
18:15 wrap-up
#watchrepair #watchrestoration #watchwithmike

Хобби

Опубликовано:

27 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@Vikkar1 Год назад

Keep the videos coming Mike! There's something about seeing a decades-old watch come back to life with a simple battery change.

@WatchWithMike Год назад

@Vikkar1 - More videos on the way! I really appreciate you watching and joining the conversation.

@setnow4265 Год назад

I love the organization tips! I also enjoyed your colorful commentary. More videos, please!

@WatchWithMike Год назад

More videos are on the way! Teaser: mechanical Swiss watch action!

@hockeyrd99 11 месяцев назад

You don't need to loosen the screw at 9:00 to remove the battery on that movement. Just put the tweezers in that hole and slide it off of the battery and it will shoot out of the movement. I usually just use my finger nail to pull it out of the way. Also, now that you know where the spot is on the Seiko to get the stem out, works best on Seiko's if you pull the crown out to the setting position... easier to put the stem back in that way also. Always check the stem to see if it has an "angle" on it so you can just push it back in without pushing the button down.

@WatchWithMike 11 месяцев назад

Excellent tips!

@jdprice3043 8 месяцев назад

thank you for your help

@WatchWithMike 8 месяцев назад

You're welcome! Thanks for watching!

@IShootWatches Год назад

That magnetization is insane! I love it that it lined that stem and crown up perfectly with your calipers!

@WatchWithMike Год назад

Right??!! While not desirable, the magnetism was very satisfying! On a related note, I just bought a carbon fiber caliper so magnetism isn't an issue, and there will be less chance I'll scratch something with it. I love reasons to get new tools!

@IShootWatches Год назад

@@WatchWithMike Digital or analogue? (carbon fiber)

@WatchWithMike Год назад

@@IShootWatches Digital - Only $12! I couldn't believe it! Good to 1/10mm, which is fine for watch case dimensions, etc.

@johanvandersandt8904 Год назад

My brother was born in 1988 haha! Love that your wife came to check on you! She seems nice! I have learned with quarts watches that you win some and you lose some... The other day I disassembled a Miyota 2035 and was utterly shocked when I saw how many parts was in that little quarts watch. I put it back together but it still doesn't run. Doesn't matter though because it was a leaning experience and an old secondhand watch. That green is probably acid that ran out of the battery.

@WatchWithMike Год назад

Johan, thanks for the nice words! I’m glad you are digging into watches, too. It’s truly amazing how many tiny parts they pack into these small quarts movements.

@johanvandersandt8904 Год назад

No problem! I am very much an unskilled amateur at this point but it is fascinating! Thank you for sharing!

@samnova450 3 месяца назад

Good job Mike haven’t worked on any quartz watches yet. Where do you get those gasket rings?

@WatchWithMike 3 месяца назад

Thanks Sam! The gaskets are from Amazon.

@rajeshdas392 8 месяцев назад

Quartz watches dont need mich service. Then can even run just by replacing the battery. They dont require maintenance and service. That is why they are widly used. Also cheap and reliable. Once you put the battery then forgot for 2 years.

@WatchWithMike 8 месяцев назад

My quartz watches sat in a drawer for 25 years! 😁

@stevendark9567 7 месяцев назад

Oh I disagree bro.. I bought 3 non working accurist quartz watches from ebay to try and restore them. I found that there are many similarities with a mechanical watch and are prone to getting gunked up or enduring a burst battery.. I'll admit, working with extremely tiny plastic gears, pivots and pinions is no joke lol. But after the parts are cleaned and all contacts lightly sanded, I managed to get all 3 watches running again and it was extremely satisfying. One thing However, I'd never paid luxury watch prices for a quartz watch. Anything over £200-300 for quartz without precious metals is not worth it Imo. Hint hint Hublot!

@IShootWatches Год назад

Congrats on 1000 subs, Mike! I know it's not your first rodeo but it's still a milestone on the way to who knows where!

@WatchWithMike Год назад

Thank you Dayton! 😁😁😁 I saw that first thing this morning and texted a screen grab to my wife, who has been extremely supportive in this new hobby. My next milestone is getting 4000 hours of watch time… I'm currently at 3500. When I get to 4000 I get to monetize and watch big bags of cash come rolling in each month. Yippee! 😂🥳

@IShootWatches Год назад

@@WatchWithMike Ha! I didn't know that you could request RU-vid revenues in crunched up one dollar bills ! 😂😂😂

@gopalakrishnanramaswamy6562 7 месяцев назад

I am totally confused with the mounting of the mainspring in the barrel.I am terrified with the direction and which way the spring to be fitted. Because I know the arbor can be seated both ways the hook of the arbor being facilitated to wind either ine the clockwise or anticlock wise. That is the hooking part placed on the left or right. Can the spring be placed either way, i.e the inner end facing right or left? Please enlighten me in this regard. Thank you in advance .

@WatchWithMike 7 месяцев назад

Great question, I have been confused by this in the past but now I understand it better… The arbor has a threaded hole in one end, which points down into the barrel to accept the screw for the ratchet wheel. When you point the hole down into the barrel, you will be able to see the direction of the hook, and therefore know which way to wind the main spring.

@philipbrailey 3 дня назад

What was wrong with the movement you replaced?

@TailSpinRCSpain 7 месяцев назад

Ebay : online flea market for rogues and scammers, LOL

@WatchWithMike 7 месяцев назад

I have been lucky on eBay so far, but admittedly I don't buy a lot there. I hope you haven't had too much trouble there…

@mikaelvalkeinen9983 Год назад

Might I suggest that you start using fingercots? I see that you touch the movement and parts with your bare fingers quite often ..

@WatchWithMike Год назад

Yes! I am trying hard to remember fingercots more often. I get lazy when it’s my watches, especially when I am handling parts that are normally on the outside of the watch. On the positive side, it helps me improve my Rodico skills! 😁