Тёмный

Xfly-model T-7A Red Hawk 80mm unboxing and assembly 

WarrenRC
Подписаться 804
Просмотров 4,5 тыс.
50% 1

The unboxing and assembly of the new Xfly-model T-7A available at Bananahobby.com
www.bananahobby.com/6-ch-xfly...
-6 operable channels (Aileron, Elevator, Throttle, Rudder, Retracts, Flaps)
-Scale replica of the iconic aircraft flown by the U.S. Air Force for training and other missions
-"Galaxy-X8" 80mm 12-blade EDF system with 6S-compatible high-RPM brushless inrunner motor and 100A ESC deliver -fantastic performance with virtually instantaneous throttle response
-Scale retractable shock-absorbing metal landing gears with sequenced gear doors
-Factory-installed 4 bright LED navigation and landing lights, full-flying horizontal stabs plus operational flaperon setting
-Removable missiles and drop tank for optional use
-Integrated wing connectors for easy installation or removal of main wings
-Latch-type top hatch with clear canopy, cockpit detail and pilot figure
-Large battery tray allows for 6S 4000-7000mAh LiPo battery for increased flight times
-Fast and easy assembly, no glue required
Constructed of durable EPO flex foam

Развлечения

Опубликовано:

 

4 янв 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 13   
@edwardcase
@edwardcase Год назад
The T-50 70mm I had is a lot like this....this one in 80 mm should be fantastic@!
@WarrenRC6373
@WarrenRC6373 Год назад
It has great power to weight ratio and flight envelope. Capable of acrobatics, not 3D since it is a scale jet. It’s so much fun to fly you’ll enjoy it. The scale details on this jet is Fantastic.
@Flight6677
@Flight6677 5 месяцев назад
You did not talk about the most important items - the setup of the RX and control throws and actual CG.
@davidgerlach1132
@davidgerlach1132 4 месяца назад
Personal preference.
@rcrotorfreak
@rcrotorfreak 3 месяца назад
It's on you're manual duh
@Flight6677
@Flight6677 3 месяца назад
@@rcrotorfreak Why make a video duh?
@rcrotorfreak
@rcrotorfreak 3 месяца назад
@@Flight6677 Look many video is welcome but doesn't mean it's going to be a 1234 step video in fact I love that there so much video of this model that can answer you're address. Either way you're manual will say throws that is needed.
@rcrotorfreak
@rcrotorfreak 3 месяца назад
Hi where u got that model stand?
@WarrenRC6373
@WarrenRC6373 3 месяца назад
www.bananahobby.com/accessories-model-stands.html
@n3cr0sc0pe
@n3cr0sc0pe Год назад
What a great video, very helpful thank you. I fly Spektrum and have noticed that i have to have my DR down very low on the elevator to get the book throws. I have contemplated moving in a hole on the servo horn, to increase torque and resolution. How do you find the elevator in stock setup please?
@WarrenRC6373
@WarrenRC6373 Год назад
In flight the low rates have plenty of elevator to perform basic acrobatics. It doesn’t feel sensitive on the controls. During landing speed I fly it on High rates, it makes it much easier to flare.
@Illustrioussoles
@Illustrioussoles 11 месяцев назад
Which transmitter are you holding ?
@WarrenRC6373
@WarrenRC6373 11 месяцев назад
Powerbox Core
Далее
Xfly-models T-7A Red Hawk 80mm edf “Maiden”
8:36
Просмотров 2,9 тыс.
Xfly-Model B1-B Lancer from Banana Hobby UNBOXING!!!!
15:23
A Nearly Perfect RC Jet Experience (FMS Hawk 80mm)
17:25
100❤️
0:20
Просмотров 34 млн