Xiaomi Electric Scooter E1 Motor Error Fix 

I have a kugoo M4 that I’ve loved using. I have crashed it a few times and got the error 1 code during a normal journey. I saw this video a few days ago and it has encouraged me to give it a try because nobody near me seems to do repairs. I’ve never done anything mechanical like this at all, it’s your comment at the end of the video saying you haven’t ever messed with scooters before that has given me the hopes that I might be able to fix it after all :) My soldering kit arrived today, I’m going to open it up in the next few hours and hope I find the source of the problem/manage to repair it :)

Hi there. Just wanted to stop in to let you know that your video is still helping people to this very day. Had a bad wipeout this afternoon. The concrete ate right through the wires right in the same place as yours, while your method of fixing it was a little different, It was still successful. Lifesaver, I could find no other videos about repair for my particular scooter. Mines was a hiboy s2 pro, just got at Christmas. Once again props to you sir!

Your video is helpful😊. It helped me understand that E01 can be caused by simple wire disconnections.

Absolutely top-notch repair...considering you knew nothing about E-Scooters beforehand. Makes the repair even more impressive. Like you (or were? :P), I am new to E-Scooters. But, I took onboard a repair of one though, just to impress its owner - young and gorgeous mum of three! (I know, a silly idea.) I knew everything would be on the internet, especially RU-vid. But, after painstakingly getting all the error codes for a HitWay (or Evercross) H5, I delved into faultfinding. I was getting an E-010 error (LCD Tx comms) at first, then after messing with the wiring loom entirely (buzz testing with continuity meter), I am now getting a E-001 error. Then I saw your video and it confirmed to me that the cable entering the hub, like yours, was twisted and damaged. So, I'll venture into the motor hub and see what's what? I'll also test that the three Hall sensors are working correctly (I saw demonstrated on RU-vid with a magnet). I'll let you know how I get on.

Great Video Brother! I got a Hover 1 journey and had the same code. Removed the deck and started playing with wires. No obvious damage spotted, but when i disconnect the battery from the controller no codes, as soon as the hub rotates... E1 code. Its midnight now, so tomorrow's another day. After work i plan on opening the Hub housing and checking the wires. Funny enough when i removed the cheap plastic guards from the forks the bolt holding the hub fell off.... still no obvious damage to the wiring... So i assume its internal, gonna have tomorrow breaking it down and figuring this mess out lol. I got in the scooter for $40 from amazon after a 56% off sale and $150 gift card for credit approval. If i can manage another 5 months gas free commuting ill be a happy man. Again. Great video, Cheers!

Dude I have the same problem with same scooter I've taking the wheel apart , but didn't see anything wrong , I'll take it apart again and check thoroughly ,to see what that E1. Code is thanks .I'm glad you were able to fix it .when I tried to reset E1 on bottom I discover that there is two power on scooter P1 P2 for faster speed . If you hold the power button it beeps then you can see the two modes .

Thx for this, I've fixed my lads having watched your video 🤙

Awesome vid, just what I needed. I have an escooter (different type than the xiomi but same principles) that also got the wires damaged just above the end of the centerbolt of the motorwheel. This video helped me understand what to expect. I opened up the motor to see if I could replace the wirebundle, but it was impossible, In my case there are only three (3) thick wires, no hall sensors. No idea how the controller knows the speed. All three were seriously damaged at the entry point to the bolt. There was no connection pcb inside, the main wires were connected directly to the windings. So, unlike in your video at 3:17 I tried to splice new wires onto clipped-off ends just above the bolt. And then some good heatshrink around it. It looked good, no shorts. But unfortunately when I put everything back together (and connected the spliced wires to the main wires from the controller) it did not work. The motor does not spin, and when I give it some turns with my hand and apply power via the controller there is some bonking sound. The wheel turns well without friction in its ball bearings so that is all ok. No idea what do next. I don't want to throw a 800 us$ escooter that is only one year old in the bin. I doubt that anything else is broken, but of course it may be, I had a little rough beating before it stopped working. Maybe there is a hall sensor somewhere else that I haven't found that is dead? I don't see any 'unknown' cables going out anywhere.

Cool video, thank you for making it! Interesting to watch

Do I need to change the Wheeler or van u do a quik fix?

Nice video, it gave solution at my problem on a Ducati pro 2. Thanks

Well done dude 👌🏴󠁧󠁢󠁳󠁣󠁴󠁿 my godson just handed me his scooter today with the exact same wire problem .

Hey mate Mine also says E1 all the connections I can see look fine ?

Great video, thanks for sharing. Does the front wheel on yours also turn rather hard? (As if the bearing is too tight on a bicycle wheel) And: Has yours ever had an "E3" error?

Whatt is code error E5 for scooter Ducati croos-e 460w work okay for not show KM speed

Please, do not forget to disconnect the battery to do this kind of operations (the battery is located in the cover that is under the e-scooter).

Hello friend, how are you? Well, I'll let you comment, I have an electric skateboard on the computer, I marked e6, which could be the e6?

Good work 👍

Did the scooter wheel spin before you put everything back together???????

I have one of these that has an E1 code. I took it apart and now when I ride it and hit the accelerator, it literally acts like a brake.

A lot of them get the e14 error which is a scooter throttle error and when the throttle goes stops your scooter moving. So once it’s changed to a new one your be good to go. Happened to me two days ago

Thank you

Dose anyone knows where the white wire connects?

Hey is there any posible way that I can contact u

Does anyone know about a M MEGAWHEELS E1 error code fix?

I have a mi scooter when I turn it on it won’t move my back wheel is stiff anyone can help no sound on it to

So much help thanks

It doesn't just come off like that! You have to bash the thing to get the case off, it's bloody difficult!

Thank you!! All I had to do was tighten a bolt.

hey there I had a similar problem but with my Xiaomi Pro 2 the same thing happened with my motor but the situation was way worse... I speculate that the nut got loose as well since the wires wrapped around the motor but the thing is that somehow the motor still managed to drive (this happened while I was riding it) while I was riding the scooter not knowing what is happening to the motor I soon noticed that there was smoke leaking out of the motor when I touched the motor it was extremely hot luckily I was 2 houses away from my house so I grabbed the scooter and ran to my garage and quickly started to take the motor off as fast as I could when I eventually took it off and unscrewed the plate holding the motor together the entire motor was literally on fire so I grabbed onto my bottle of water and washed it down until it was all gone at that moment I noticed the wires were all twisted just like yours and that's how I knew it had something to do with that but anyway I took the entire motor off and replaced it with a new one that was the worst day off my life! I thought my scooter wouldn't survive that day and thank god I was near my house because god knows what would have happened if I was somewhere else in the public... but yeah this happened 4 months ago and I live in the UK so I still wander what the police would do to me if this happened in a public area since they are still illegal for now in the UK

I thought you was "Ali G". Great video.

Thanks for the video

Update: I have the wheel off, the motor cables are disconnected. Everything at the front end of the scooter seems to be intact so I'm really hoping it's just a frayed wire where it bends into the wheel, or maybe one needs soldering back into place inside the wheel. I should know soon!

Awesome video, i have a E4 CODE the motor wheel seems stiff and does not move any ideas?

Thank you so much.❤

I have a zinc Evo scotter with this error will this be the same

I know I'm being really dumb but I'm having difficulties in getting the wheel off any hints please

Hey the same kinda thing happened to my scooter. But now it literally will not turn on. I have changed the motor but it still doesn’t turn on. Any ideas?

my scooter smells of burning its frame that is inside where you put your feet that has many cables is silver and says e6 can you tell me how to repair it please

Was watching your video with interest. My son bought a used reconditioned E scooter a few weeks ago. Firstly he found the battery only lasted an hour but that was because I think he was riding on fast speed. Then the rear wheel nut came loose and fell off. I had to get a replacement from the seller. Now he gets an Error code 1 on scooter. He says the other nut came loose and the wire cover wore away, he said it became twisted. So I've been looking for answers. I've tightened nuts but it's still the same. Taped round the wire .I now feel I need to open wheel up to see. Would help if I have a soldering iron. It's kind of frustrating.

In my case it was the tire rubbing against rear motor wire. Solar scooter

I guess I figured out what's wrong with my scooter The front wheel came off few times while I was popping a wheely Now the scooter turns on but does not move

Hello do you know what e3 means because I can't find this error on Google, help pls!

Code 18 ?

Literally same exact problem as me, I just don't have the ability to fix it

Now the scooter is working but E1 code didn't disappear is it normal?

❤

Dude looks Kyle from Nelk Boys

Do anybody know how to fix E5

For the love of God, PLEASE BUY A SHIFTER 5:35

Help bluewheel Ix 300 code eros E 20

Good j9b man

Hi any ideas what e5 error means

use heavy duty locktite, if it can come loose once, it can come loose again

I've got no power on my HYBOY N IM NOT SURE THE PROBLEM IS

'Make it work' (or other specials) HELP me pls.. .. Motor problem began with the ‘hall’-noise etc. -Battery 90 %. 40V -Cables are okay. -No error on display neither beeps.Only 0 so no speed either. Beeps only on/off. -The 3 spots on the hall-board at the motor (yellow, green, blue) and the 3 right pins of the halls give 5 V. NO ZERO (no matter where or how the magnet is) -Renewed all the halls SS41F, nothing. -Renewed them by a preformatted board (middle one has different polarity) but nothing changes, 5V no zero. -Renewed the main board but keeps the same. -Renewed the dashboard, no difference…, -again new halls, reversed the middle one and twisted its pins ‘cause of the polarity, but again nothing changed. -The throttle worked fine. I checked the halls etc on all the ways I could find on YT. What can I check (and fix) still more? Thx for ideas and help!

gj dad

Like those bumper stickers say , " sh.t happens '"

Had mine fixed in 5 minutes that’s pal

Wawa wewa I LIKE

En español no entiendo nada.

I have a E2 on my scooter

YAXŞI DÜZƏLTDİN. ÜZÜNƏ BAXANDA AVARALARA OXŞAYIRSAN. ANCAQ BACARDIN.

You should put your camera closer to the motor and do not accelerate the video....... I cannot watch what you were doing