So here i will show you how to disassamble the break lever. The error 15 is related to break issue and in most of the cases you could repair it yourself.
First - you have to release the wire from the lever. Unscrew three bolts underneeth. Now the lever can be pulled out. Gently pull it out without loosing
its inner parts.
Now the magnet and the sensor are displaced from each other. I'm turning on the scooter and you can hear the beeping sound with error code 15.
Once i'm aligning sensor with the magnet the error disappears.
Now, when everything is aligned - it is the time to screw everyghing back. Once again - check for the alignment of the magnet and sensor before assembling.
Make sure you align the spring on its original place on the lever and put it inside. It is quite easy procedure.
Immediately after put the bolt inside and tight it up.
The last step is to put the wire back in place. And in order to stretch it squeeze the lever while it is on tension and it will extend the wire from
cable so you can fit the cable back in the pocket.
Thank you guys for watching. Buy.
8 сен 2024
