⚪️ WATCH NEXT 🛴 My latest upgrade for the stem ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5Uctq-5s9fM.html 🛴 Xiaomi videos you must watch bit.ly/35hyUfm 🛴 Xiaomi M365 Pro upgrade videos bit.ly/37mWNoI 🛴 Xiaomi maintenance videos bit.ly/31nxsH9 ⚪️ Product links in description if you want to upgrade your scoot!
Thank you so so much! Been recommend your video to my fellow scoot buddies (m365 pro) and your a lifesaver. Very informative and I really hope Xiaomi Company really see this video and how you explain it. God Bless and stay safe.
Makisig the.beagle no worries! I am glad I could help. If we all help each other and give support, our scooters should be absolutely fine for a long time!! Thanks for the comment, really appreciate it! Scoot safe 🛴
Great video. Just solved my creaking issue by tightening the bolt you described. Probably covered around 50 miles on mine so far and literally just had to turn it maybe half a turn just tighten it up and its now silent again.
i was just ashemed going on the street with that noisy creaking sound of my new scooter, sounded just like that being about to snap or something, i just tightened the centrel bolt of the bearing u said, and its so silent again, thanks, WORKS FOR XIAOMI 4 PRO too
You loosened the nut, but didn't re-tightened it in the end, that's a major omission for a tutorial! Anyway thanks for the tips, it helped me solve the creaking sound on my scooter. I'm going to add a 4mm allen key, a 10 spanner and an extra lock to my emergency kit, because I already see mine is a tiny little worn out and that's probably the reason why it started creaking. I try to always ride on smooth surfaces even if I have to take a longer route, but there's always that bad patch of road that can't be avoided...
Hi 🤛🏻 I say at the start of the video to pay attention because it’s very important. I mention between 4:58 and 5:04 to re-tighten the nut and I also mention it in a pop up text. Safe riding ⚡️
<a href="#" class="seekto" data-time="503">8:23</a> Soyuz foyve - eeeeerrrrn…. got it! Jokes aside fella, this is a great video - you sorted my creaking Pro 2
My accent can sometimes be strong for sure! Even the subtitles don’t make sense sometimes! Glad it’s sorted Phil! I ended up getting the X-lock for added support which I find very good ⚡️
@@Movelectrics I’m of Irish descent myself mate - O’Carroll’s :) I’m just looking at your other video on the X-lock now. Subscribed by the way, you’re a natural in front of the camera and there’s no fluff I have to FF through at the beginning of your videos.. informative, well presented and concise. I love it.
I never did did change the pin in the end. No need. Got the X-lock and that supported everything. Made a video on that. But there are videos out there on the pin replacement. Here is one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-S05x7NUvd8o.html
Fair play man. You can also apply some silicone spray (with your finger) where the folding mechanism meets. One thing that helped, was the X-lock. Consider getting it at some stage. Here is my video on it ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5Uctq-5s9fM.html
Hey man me again .. sorry to bother you. what is that you are holding at <a href="#" class="seekto" data-time="87">1:27</a> in the video where you say if you have snapped one of these in the stem ? what is that ? how do I check to see if mine is OK ? I've ordered the extender and the xlock and I'm watching your previous videos to get my mind ready for the installation once the parts land.. thank god you put these videos up man!! Much appreciated as always
Hi could you tell me if any of the modifications you have done will work on the aovo pro electric scooter as iam interested in the suspension for front and rear and where did you buy that red cable cover please
Hi Kamp! Good job! Don’t use the shims, they are a last resort if too much damage has being done. Don’t pull or push on the stem while riding. The X-lock is brilliant, it can reinforce that whole area. I done a video on it 🛴
There's no need to disassemble and adjust the whole thing, can just either use the silicon damper pad on that place or use some wd-40 lube it will stop creaking immediately.
I don’t disassemble anything, simply adjust and will take just a couple of minutes. Like I mention, the silicone dampers are used as a last resort and WD-40 definitely ain’t the best. Silicone lubricant is. My solution? Adjust first like in this video, then simply buy the X-lock (made a video on that) Problem solved.
Hi, I want to ask something, I bought pro 2 like a week ago and the scooter started to make this cracking sound 30 minutes after it was out of the box, I searched in Google and I found this video, so you have experience with that problem and I want to ask you, should I return my scooter because of that problem or I should keep it , but if every pro 2 does that noise, why should I return it, because the new one will make the same sounds
Hi Emo! Very important not to pull or push the handlebars while riding. This more than likely caused this. It’s common on the Xiaomi to make that noise. Adjust it like I explain in this video and I would also suggest buying the X- lock for added support (I done a video on that also) 🛴
hi mate rhank you for your reply cupple days ago i have a question for you my battery is fully charged and my scooter started going slow and i only had it a week i check all over my scooter mantaince and every thing fine is there way telling me what mite be wrong with it many thanks scotty
The idea is you adjust it as soon as the creaking starts. Lubricant may stop the noise but there is gradual play in the stem still. It will get worse as time goes on. Some people use the dampers to have a firm stem. I would suggest getting them because it’s definitely not safe having play in that area ⚡️
Hi Daniel! This is a reinforced latch that you can replace the stock one with that I adjust in this video. They are only needed if you snap the current stock one. Just avoid jumping, pulling and pushing on the handlebars.
Hi mate, I need to put a new rear mudguard on my daughters pro2, I've changed one on my aovo no problems at all, but just wandering how do you remove the little supports for the gaurd from the frame of the scooter, where it attaches behind the reflectors?
I ain’t familiar with this scooter so check if the stem area is tight. Silicone spray (small amount) is also helpful where the 2 points of the stem meet ⚡️
Hi. Hope you can help me. my top nut that your loosened <a href="#" class="seekto" data-time="223">3:43</a> came loose and fell out of my scooter. Where can you buy and new nut for me scooter?
If it almost folded itself, the latch was not secured and tightened properly. I also done a video on the X-lock installation to prevent this from happening ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5Uctq-5s9fM.html
Hi the stem on my sons brock it needed welding everything else worked gave it too someone too weld who is saying he's welded it but wheels not working!! Going too pick it up tommorow any info would be great cos I'm going too get fobed off ☹️
Hi Rachel! Why does the stem need to be welded? Did it snap? These scooters are not made for jumping, pulling or pushing on the handlebars. Always need to careful ⚡️
Hey man, mine was bumped into a fence while I was on holiday by my brother and now it requires a lot more effort to turn it left and right, why is it so stiff??
My 365 pro 2 snapped in half while i was riding it. It wasn't even 1 year old. Buy a proper one with big wheels and suspension cheaping out on these can get you seriously injured or worse.
I disagree. Xiaomi are good quality but people think they can go off curbs, pull/push on the handlebars using their weight. Lack of maintenance and tightening contributes big time. Also I would suggest getting an X-lock as an addition for stem support. Made a video on this.
Hi! I flashed my Pro over 1 year ago, no issues at all. I would suggest getting advice if you have never done it. I got the CFW from a FB group. What model do you have? Pro original/Pro 2…?
@@Movelectrics I have a pro 2 Thanks for your reply to means alot, I'm on Facebook group but given so many different options some say xiaomiflasher and pay the 6pounds others say many other things
Hi Daniel! My latest video actually goes through all the upgrades and the links are in that video description to buy them. Here is the video if you want to watch ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AGOoGUKYrNk.html
Hey hope you can help me explain but for this part <a href="#" class="seekto" data-time="604">10:04</a> how there is the front but where the bolts are and there is a line separating the top and bottom yea well my one is uneven and idk how to fix it Edit: just where you are pointing at
Hi Slavic. It’s a not an important adjustment but I think it is best when there is a similar gap on both sides to avoid stress. All you do is position it center with your hand like I show in the video. Then pull up the latch to secure the stem. I would suggest getting X-lock for added support. I done a video on that installation 🛴
Can you help me? When i touch the front bolt, the long thing between the bolt and the clock nut (minute <a href="#" class="seekto" data-time="279">4:39</a> ) Would not turn with it. I have the Xiaomi Pro 2 with the new folding mechanism where you just pull up without turning the plastic thing around the stem
@@xellostube adjust as you see in the photo. Plus you can also rub a small bit of silicone spray between the folding mechanism meeting points or some people use black insulation tape.
Hey mate i got 2 questions. For the main screw that controls the steering angle in the middle, mine is super tight and doesn’t want to move at all. Is this a problem? I didn’t want to force it so i just left it as it is. And for the nut that goes up and down, i can screw until its tight then it pretty much can’t be tightened anymore. Should it be left a little bit loose or tight enough without applying lots of force?
Great video tho! My latch seemed quite tight and had to put quite a big of energy to put it up. I also have a creaking sound, will have a ride tonight and see whether the sound is gone
@@keeaan6895 main screw in the middle is only for steering alignment or when fitting suspension. The nut you can leave just a little bit loose (literally a hair) Also some people apply silicone spray where the folding mechanism meets. I spray some on my finger and rub around. I would consider the X-lock for added support. I done a video on that.
So I’ve adjusted the folding mechanism perfectly, lubricated the mechanism and all on my 1s. Now i’ve bought the dampeners but they don’t even fit. It should make a click and fit into place when i put the stem up but it doesn’t and then unable to close the latch. Can’t seem to get rid of the creaking noise at all, it just keeps coming back. Feel like bringing the scooter back via guarantee
My folding mechansim makes a clicking noise everytime i go over any bumps i tried adjusting things e.g making the fold tighter so it locks better and doing the allingment of the stem. Nothing seems to work, is there a solution to this problem? Please help!
Check all the nuts and screws. Personally, you will get rattles every now and then. Once everything is tight, don’t worry about it. You can if you want, post a video on my FB group so i can have a look to at the scooter making this sound bit.ly/2NMeXIY
Hi Jamie More than likely the middle bolt (located in the middle when you fold the handlebars) is too tight. Loosen that a really small bit until you are happy. Don’t loosen it too much as this aligns your steering and pulls the bearings together ⚡️
@@Movelectrics thanks for the reply love your vids one last question if you can help me that locking bit at the front when my handles bars are lines up straight and my wheel also straight and look down from handle bars I look at the reflector and the lock bit is to one side is this normal if you get what I mean so handle bars and wheel bang on straight but the latch is to one side frome the front reflector
Never mind the reflector. Once everything lines up don’t worry. The latch that has the small screw doesn’t sit 100% straight unless you hold it with your hand when pulling up the black lever. Nothing really to worry about ⚡️
Hey dude where do you get the plastic bit you put inside to stop creaking and also the reinforcement bars for the mud guard.. Says it's in the description ? Can't see anything.. I have an MI Pro 2, and it's squeaking like mad... I've attempted the re-adjustment and it doesn't really help, in fact it makes me unable to fold the bloody thing.. The bolt with the 10 size spanner, you can lower it but then the top bot with the 4m Allen key doesn't bring the bolt down to meet that nut. it's pretty pointless on this MI Pro 2.. I absolutely hate it.. Had I known I wouldn't have bought this scooter man.. what you think the plastic may help ? where can I source this from? Thanks again dude.
Hi man I know this adjustment is tedious, but you literally turn the front screw a mm by mm until it’s firm when closing. Of course loosing the locking nut first inside and re-tighten when finished. But if there is too much wear and tear, go onto these steps. Another tip is if you have also creaking, you can smear silicone spray where the folding mechanism meets OR by the dampers that are rubber OR you could even just use gaffer tape. I would by the way get the X-lock (video linked below for full explanation) To be honest, I have reviewed so many scooters and almost every single one of them, have stems that need adjusting over time. Also for all accessories, just type ‘Xiaomi M365 accessories’ into AliExpress. X-lock video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5Uctq-5s9fM.html
@@Movelectrics there no stores round me that fix scooters erm wud u recommend me doin me self I have another scooter with the part I need or can u do a video plz mate
If you do this incorrectly, you can end up potentially hurting yourself. I would recommend asking around the local area. I no longer have my Xiaomi scooter. However I did do a suspension mod that shows the order of the bearings 👉🏻 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kPvcoipiAhY.htmlsi=x6ddttnD-vkJcDgn
Mine started creaking/clicking all the time after about 100-200km, also there's another squeaking noise when going over bumps, I couldn't hear it properly due to the clicking sounds. I tried adjusting the bolt like in the video but it didn't help (even when I tightened it so hard that I could barely lock it). Since it's still under warranty I ended up going to the store, they applied some spray (probably silicone lube) and it stopped the clicking sounds. But now I can clearly hear the squeaking sounds when going over bumps - it's high pitched noise - I can't pinpoint where it's coming from, I'm not even sure it comes from the locking mechanism. I'll try to see if I can video it somehow and maybe call the store. Do you have any suggestions?
Would using a threadlocker on the bolts solve this issue more permenantly ? I get these creaking sounds after every 100kms, even after tightning as described..
Hi. No. It’s very common and the only way it can be really prevented is by fitting an X-lock. I done a video on that installation. The creaking/wobbling is caused by the rider pulling/pushing on the handlebars while riding. You have a few other options however if you don’t want the X-lock People use the rubber dampers (In my opinion, these are a last resort) Some people have just used tape in between the folding mechanism. Just type in (Xiaomi M365 creaking on RU-vid and you will see their videos) What I have tried and works well also is, after you adjust everything like I do in this video, you can then apply silicone spray with your finger. Just rub it around the edges of the clamp.
Hi Carbune! I would suggest checking your wheel alignment. It’s ok if it is just a small bit but not too much. I done a video on the alignment, have a look 🛴
@@Movelectrics thanks for answering bro. Really apreciate it. I am sad because i did not get to ride my brand new scooter because it wobbles even after screwing and tightening. Still seems to GO back and forth a little when i put pressure on stem while standing on the scooter. Can i send you a video somewhere to have a look and get a proper advice? Thanks a lot!
Definitely was a bit longer than it should but I over explain sometimes. It’s an older video of mine when I just started out. Thank you for the watch though and hope it helped ⚡️
My mates Xiaomi Pro 2's handlebar is bent due to a accident he was involved with while being side-tracked. Anyone here know where to buy a spare Xiaomi handle bar or how to bend the handlebar back to place?
Hi Nemanja. I have never used the rubber dampers because I adjust it to stop the creaking/wobbling of the stem. You only need the dampers if the damage is already done. I saw people holding them in place with tape. I would suggest investing in the X-lock for added support, I done the video on that installation and it’s brilliant.
@@Movelectrics it is on place, but when I do the thing with my hand on 6:55 it just pops out on the sides like it's slime but it's just rubber damper The x-lock looks cool but I don't have money to spend on it and it's a lot of work 🥴
I’d like to see exactly what’s happening. Can you post the video here and we can help tiny.cc/eiktqz The X-lock takes 10 minutes to fit and is great. Avoiding stem issues is very important.
Heyo, my xiaomi e-scooter has been having this problem recently, but the model that you have looks different because you have a locking mechanisim on yours, but my e-scooter is just "clip up". No locking. I'm a bit worried that if i follow the instructions in the video it might not apply to my escooter, and damage it. Should I be worried about it being different?🛴
Hi! I’m assuming you have Pro2? Only difference is the latch area where it clips up. Same adjustments apply like in this video. If it’s not addressed, you risk damaging the stem as time goes on and you will need to buy the dampers. Also, you could use silicone spray and apply a small bit where the stem meets ⚡️
@@Movelectrics (thanks for responding fast) Well it's only like 2 weeks old but there isn't a lock for the latch, so it just goes up. I'm assuming that it doesn't change much, but i'm kinda worried about doing it because i've never done anything on the scooter, and since it's different i don't want to damage it. Does having the different model change much?
Your model is the exact same as mine. Maintenance is very important so you will have to do it. I’ve done many videos on things so check them out if you ever need ⚡️
