Hey bro, its kinda funny - but it seems like such scooters have an RPM limit for the motor. I owned M365 Pro several years ago - after similar re-fleshing as you described it reached 34-35 km/h on full battery. BUT then I putted 10 inch tires on it. The same stock rims, but those tires are taken from baby carriage. Much thinner walls, working good with just 2-2.5 bar inside. I was a bit shocked, but I was able to reach almost 40 km/h (GPS) because of bigger wheels with the same RPM of the motor. And finally one day I decided to ride it with my girlfriend - on the perfect pavement, no dents/bumps etc. We achieved 37 km/h - taking into account the fact that our total weight is almost 140 kg. So I guess the real performance of such scooters (of course Pro have 350W, not 250 - anyway) is limited by some kind of reserve which is needed to keep performance/reliability in a good balance...
It has something to do with the electric motor and physics. This can be bypassed by field weakening (scooter hacking utility fitmware - shfw has field weakening options) I tried it on a Xiaomi 3 scooter on a stock battery and tires, it accelerated to 39 km/h. Although after 1 km the engine became hot. Subscribe, thanks.
Recently I noticed in the comments that people complaining that hack is not working. Decided to upgrade to the latest firmware and noted the same thing. After that, I did a little research and found the sad news. Too bad that I didn't do that before flashing :D Well, clever guys definitely will find a way to override this. Subscribe, thx.
@@ozgurgurun As for mi home, maybe they just didn't try to delete the scooter from the app. If you won't delete it, it will not connect after flashing. As for range looks like approximately -4km. Sub, thx :)
Hi there. Congratulations for your channel. My 1S scooter is updated with the latest original firmware by Xiaomi. Can i install the "Touring" custom firmware or it has to be downgraded first? (i ask because the webpage has a date of November 12, 2020)
Hi. I downloaded firmware and everything is good but battery temperature is a little higher about 40c..is that normal? Are you still driving on that firmware and how it is for you is good or you have some issues? Thanks a lot btw my english is not that great but i hope you will understand
I'm still riding at that firmware, no problems so far. I checked batt temp just the first time on a short run (4km+), it was around 34c. On the scooter is battery overheat protection, so as long as you don't get warnings on the dashboard I think everything is fine. Maybe someone else will provide more info about battery conditions :) Subscribe, thank you.
Hi, friend! First of all, thank you very much for your video, I'm sure it will help many of us. One question...the Smooth.zip file could be used for Essential and Pro2 as well?
It should be the same procedure, and you can use smooth DRV, only if you are downgrading BMS you need to choose your scooter version: files.scooterhacking.org/firmware/ And one mode thing for PRO2 you need to check your ESC board version. If it's 3.0 you are good to go, if 3.1 you will brick the scooter. rollerplausch.com/threads/vorsicht-vor-drv-downgrade-aktuelle-pro2-roller-mit-neuem-controller.5187/#post-60409 Subscribe, thanks.
Changing the head worked to downgrade the drv and bms on a scooter I just got but it doesn’t connect To Bluetooth with its normal head back on. Still better cheers. 👍😂
I flashed the cracked drv and older bms with another scooter head (and it reaches 31 km/h with wheel lifted, although I didn't tested it in real life) then switched heads and was able to update to the official drv and bms again with the mihome app. Sub. thx. :)
@@MindaugasJocionis yeah the scooter does the same as my other one way better then stock firmware. I just can’t get it to connect to my phone to change settings atm.
@@mickyroo25 Kill all your apps as they may be connected to the scooter in the background. As well to connect to mi home app you need to delete your scooter first. Bt is working definnetly as I was able to connect to downg; xiaoflasher and mihome...
@@andrewdogza5303 Another option, if you have a friend who has the same scooter with old firmware is to unscrew and swap the heads (borrow BLE) to flash the hacked DRV and downgrade the BMS. I tried DRV155 (hacked) BMS128 BLE157 with no errors. Hope this new BLE communication gets hacked :) Subscribe, thank you.
It's an old video, a lot has been changed since then. If nothing changed for you after flashing, you are on the newest BLE, and you need to downgrade it first. After that, you need to know your ESC version. If you have a 3.1 board, you need a different new-gen DRV. Check the video description, and don't forget to subscribe. Thanks.
Hi, is it possible for you to make a video how to start the scooter in Public mode and how to start in Private mode of this firmware. I fallowed your great instructions and it worked fine, I am just not 100% if I am entering Private mode correctly. Or if you can give some pointers: for example how long and when to release the break, or do you wait for some beep or something. Once again great work, you are the best.
Thank you. I believe that you need public/private firmware, as this one does not have that option. www.monopattinoitalia.it/firmware-public-private-xiaomi-v2/ They say, that the activation sequence to enter private mode is: (brake pressure => power button => release of the brake lever) I didn't try this one, so it would be interesting to get feedback from you, was it successful :) Where do you live? I assume not in Europe as at the moment in my country the weather is -12 celsius. Scooter's packed for winter :) Subscribe, thx :)
Yea, my bad, I downloaded private/public version. Now I flashed with the same version as yours it is much easier, just tourn on and go. I am living in Serbia witch technically is in Europe. Last night was around 5c and I got around 26/27 km/h with both touring firmware's. It was a short test, to cold for longer rides. Next I will try smooth version if weather allows. I guess we are both waiting for spring time. Already subscribed.
@@milandzodan Don't forget to check tire pressure, as you will lose mileage, and 2-3km of speed if they are low on pressure. With this firmware, on a full charge I'm getting 29km/h (my weight is 60kg), sometimes changes to 30 (maybe a bit of downhill or wind in the back) :)))
hello, i tried this flashing method and another very similar one except that one had 3 files that i flashed. I have a 1s and i tried flashing many times, but the speed remained the same at 25 kmh in sports mode, 20 in drive mode, etc.. Any idea what i can do to fix this? I recently got a firmware update on the xiaomi app but i did not install it. Any help appreciated, thanks in advance
There were 2 updates in a row for 1S. Check your BLE version if it's BLE157, then your dashboard is locked for flashing. You need to downgrade it with stlink programmer, or swap heads temporarily for DRV flashing time. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YAexlwq47q4.html If your scooter is just out of the store it's a good idea to check your ESC version, if it's 3.0, then you are good to go, if 3.1, you will brick your scooter. As for so far, there are no reports that 1s has a 3.1ESC board. Here is the site with details on how to check: rollerplausch.com/threads/neuer-controller-v3-1-bei-aktuellen-xiaomi-rollern-brickgefahr-bei-drv-downgrade-vorgehen.5187/ Subscribe, thanks.
Hey there. Awesome video. Does this work for an essential lite scooter? BLE 132. Downloaded the Touring zip but it's saying it maybe not be compatible with a Lite version. Thank you
Yes, it should work. And yes, the application warns that this is not essential or 1s firmware, since it is made from the M365 model. And check your ESC version, it must be 3.0 for this firmware. rollerplausch.com/threads/neuer-controller-v3-1-bei-aktuellen-xiaomi-rollern-brickgefahr-bei-drv-downgrade-vorgehen.5187/ Subscribe, thanks.
@@andrewliow145 Ask in this forum, there is a link to a web builder for the 3.1 controllers DRV, you must build it by yourself. rollerplausch.com/threads/neuer-controller-v3-1-bei-aktuellen-xiaomi-rollern-brickgefahr-bei-drv-downgrade-vorgehen.5187/page-6#post-67651 Or ask for help in this telegram chat, this guy has already prebuilt DRV's for the 3.1 controllers. t.me/STLink_XAP2P "Scooter hacking utility" is working for support for 3.1 controllers as well, but still it's a work in progress.
A lot has changed since this video release, this method only works up to BLE155. You need to downgrade BLE first. After that, you need to know your ESC version. If you have a 3.1 board, you need a different new-gen DRV, or shfw. Check the video description, and don't forget to subscribe. Thanks.
I don't have an ios device so cannot check, but checked on the internet and it looks like there are problems with the scooter flashing from ios. So the best choice is to borrow android from a friend for flashing. Sub. thx :)
First of all thank you for the video. It didn't work for me, but neither broke my scooter. I have done all the steps for s1 and everything stayed the same. Should I try to do it again? I didnt update the firewall in the mi app
If you have the latest official firmware, then you are no longer able to hack or downgrade the firmware. At least without a programmer and soldering. Check the video description and don't forget to subscribe.
Hi, successfully flashed on my scooter 1S Xiaomi. One question, if i want to upgrade firmware soon. How can i undo the flash ? I mean, back to its originated form?
On the same site, there is original firmware, you need to flash it in the same way. After that, you can update to the latest original in Mi Home app. Maybe you can update firmware straight to the newest in the Mi Home app, as it offers that, I tried just the 1st method. Subscribe, thank you.
So im wondering, since I don't own an android phone. Can i borrow my friend's android phone and flash the scooter? like do i need to have the phone with me when im riding the scooter or do i only need to flash it once?
@Mindaugas Jocionis Hi, thank you for the quick response! So I will flash the scooter and then delete my scooter from xiaomi mi home and then add it again and it should work?
@@MindaugasJocionis ohhh okay! But if i delete the app before flashing it and then after flashing it i redownload i can still lock my scooter in the xiaomi app and its still flashed?
Na sakyciau gal nelabai verta, su juo nuvaziuodavau apie 22km (neunlockintu), tai darbar kokia 17. Greitis taippat pakrito iki 28km/h matyt akumas pavargo (na arba padangas reik dasipust, tingiu tikrint) :) Is pradziu buvo 29-30, net 31 stadijone rode. Taip kad sakyciau geriau palikt kaip yra. Tiesa vaziuoja netaip nervingai kai kersas atjungtas, gali pariedet daugiau. Sub, aciu :)
Hi, having some problems connecting the Mi 1s to the down g app! Just keeps scanning and doesn't seem to connect, it connects fine with the MI app... Any pointers on what the problem can be? Thanks
Kill all your apps as they may be connected to the scooter in the background. Push "connect" few times as sometimes app can't find scooter from the first time. Subscribe, thanks.
Hi, after following the whole process i start speeding up and it reaches the 31km/h but then goes back immediately to the limit of 20 km/h. Can you help me with this?
If you have the latest official firmware, then you are no longer able to hack or downgrade the firmware. At least without a programmer and soldering. Check the video description and don't forget to subscribe.
They say: "Xiaomi M365 Standard with PRO dashboard : in this case you can proceed directly with the firmware flash" So it looks like the same procedure. Sub. Thx.
Links to the program for flashing, firmware, and other info are in the video description. Firmware - www.monopattinoitalia.it/wp-content/uploads/2020/11/smooth.zip App for flashing - play.google.com/store/apps/details?id=com.m365downgrade&hl=it&gl=US Subscribe, thank you.
Probably you have flashed the wrong firmware. Check the description of the video. If you can't connect to the scooter via Bluetooth, you need to reflash the main ESC controller using stlink: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kbj3A4aAlSU.html
@@chuikwonsimon No, dont flash original firmware. I showed that hacked fw works with mi home app. Is your ble less than 157 and main controller supports this drv? Check the video descriotion and don't forget to subscribe, thanks.
Hey i tried it but it didn't work i had already downloaded the latest firmware update. How do I fix this? Will it came a new update that works.i have the xioami 1s Nordic edition
This is not possible via Bluetooth. At least for now. Option 1 - buy an st-link, solder to the dashboard, and downgrade. Option 2 - find someone with a scooter that is still on old firmware, swap the steering wheel (in which is located BLE) then downgrade BMS and flash hacked (smooth) DRV firmware, then swap back the steering wheel. Subscribe, thank you.
@@MindaugasJocionis hey do you have a tutorial on how to do the whole process on how to swap the steering wheel. So i just swap the steering wheel with my friends scooter and downgrade the firmware and swap back the steering wheel again.
No, I don't have such a tutorial, but it's a good idea for my next video :) Probably I will make it in a few days. In general, you need to unscrew 4 screws holding the steer and disconnect the wire inside (it has a joint there). After that temporarily use your friend steer (BLE) to flash the DRV; BMS you want. Original 1S files: files.scooterhacking.org/firmware/1s/ Hacked DRV: www.monopattinoitalia.it/wp-content/uploads/2020/11/smooth.zip
Hi there. Did you have any problem charging it? I tryed one hacked firmware but then I couldn't use the original charger, the led on it remained green as it was disconnected and the scooter didn't charge. When I returned to original firmware, all went ok.
One subscriber had an issue like this on the original firmware, he had to change the charger, as it was defective. In your case, it must be something else, as charging recovered after returning firmware back. ¯\_(ツ)_/¯
Oh, and did you download the correct firmware? There are ones that are for scooters with external batteries. There are 4 types: 1. nonmodified scooters; 2. for scooters with 10'' tires; 3. the ones with an external battery; 4. with an external battery and 10'' tires. You need for unmodified scooter - "Smooth" firmware.
Sorry, I don't have ninebot scooters, some of them for sure can be hacked, ask in this telegram chat t.me/scooterhackingchat someone definitely will have an answer.
I have DRV 245 / BMS 141 / BLE 137 according to downG, flash goes to 100% but speed still lock and still old firmware after flashing. Any suggestions ?
I believe this is a model-locked drv. At first, you need to go to a specific drv. You can try using the "Scooter hacking utility" and do an "attempt drv downgrade". It will recognize your ESC and flash the correct drv. After that, you can flash any drv (of course, suitable for your ESC). Sub. Thx."
You have the latest official firmware, you are no longer able to hack or downgrade the firmware. At least without a programmer and soldering. Check the video description and don't forget to subscribe.
I assume that you tried to delete the app cache and rebooted the smartphone? If so, try asking this telegram chat group for help: t.me/scooterhackingchat Subscribe thanks.
Option 1 - buy an st-link, solder to the dashboard, and downgrade. Option 2 - find someone with a scooter that is still on old firmware, swap the steering wheel (in which is located BLE) then downgrade BMS and flash hacked (smooth) DRV firmware, then swap back the steering wheel. Subscribe, thank you. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YAexlwq47q4.html
Sveiki. Vis dar arba Stlink'u arba galvu sukeitimu. Na arba tiesiog uzsisakyt nauja dashboardo plokste su senu BLE. CIa video su galvu sukeitimu: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YAexlwq47q4.html&lc=Ugxc1_5zLTA09dlPcVl4AaABAg Turetu ateit neuzilgo stlinkas, manau taippat padarysiu video. Sub. aciu.
I flashed my 1S with the smooth package and my top speed dropped from 25 to 18. Any idea why it would do this? The acceleration seems better but the speed limiter now seems to be LOWER for S and D modes…
It's 1S right? 1. Check your speed limit with app "m365" tools. Once for no reason, it was set to 18km/h. by itself. (Even firmware flashback to the original didn't help, until I noticed that sped limitation with that app and removed it) 2. Check your region and speed limit (and change it) with the app "XiaoFlasher". If nothing helps: on the same site there is an original firmware (at the bottom of the article), you need to flash it the same way. Subscribe, thanks.
@@vaieldamatu You need to build your own firmware with some online toolkit (mi.cfw.sh/#) and deactivate KERS. I didn't try it, so take it at your own risk. Sub. thx.
@h0rny gurl Didn't understand what the problem is? You need to download this firmware on your android phone and flash it. www.monopattinoitalia.it/wp-content/uploads/2020/11/smooth.zip
Doesn't seem to work for me. It won't go over 25, flash seems to work but then not load properly or something and in my MI App it says it's the latest version when I check firmware. If I try factory reset it just disconnects, idk if that's intended?
If you have the latest official firmware, then you are no longer able to hack or downgrade the firmware. At least without a programmer and soldering. Check the video description and don't forget to subscribe.
@@MindaugasJocionis Ohh, that's the problem then. Wish I never updated lol, thought it was weird it was always saying the same version. Will this be fixed perhaps in the future ?
You should download the firmware that is suitable for your scooter. The link to the site is in the video description (www site shown at the beginning of the video). If it's 1S you should use "smooth" one: www.monopattinoitalia.it/wp-content/uploads/2020/11/smooth.zip Subscribe, thx.
It doesn't work only if you have BLE157, in this case, there are options: 1. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YAexlwq47q4.html 2. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IvQ4oT2u_vg.html 3. buy dashboard with old BLE If you flashed and nothing changed, that means that you have BLE157, and nothing has changed on your scooter. If you mean what could happen if flashing goes wrong, then probably you can brick your DRV, but it's a rare thing Subscribe, thanks.
Tam paciam www is kur partraukei hakinta DRV, apacioje yra originalus visu paspirtuku DRV, lygiai taip paciai isirasai ir viskas. Na arba gali is cia parsitraukt: files.scooterhacking.org/firmware/ Sub. aciu :)
I managed to climb to the hill, that earlier failed to. But, maybe then I was on flat battery, I can't remember now. Anyway, with the hacked scooter I was not fully charged as well. In where I live it's hard to find hills :) Maybe someone else with a more hilly landscape will share with you. Sub, thx.
Hello , Thanx for this videos it helps alot for a beginer like me . Im about to spoof ble , but im also trying to find firmware can you assist ? with hacking tool i get this info before i done anything : stm32f 3.2.1. The link i dont see any firmware numbers on and dont want to brake it .
So you have ESC3.0 that can be flashed by any FW version. Those from this video are prebuilt for ESC3.0 Only thing that you need to do is to downgrade BLE (if it's a locked version). And remember that shit can happen when flashing over BT, so a good idea is to have Stlink to be able to recover your hardware if something unexpected happens. Subscribe, thanks.
I updated my scooter with the newest update may 2022. Can I undo it in order to install the smooth firmware? Installed the firmware but scooters top speed still 20 km/h.
This is not possible via Bluetooth. At least for now. Option 1 - buy a st-link, solder to the dashboard, and downgrade. Option 2 - find someone with a scooter that is still on old firmware, swap the steering wheel (in which is located BLE) then downgrade BMS and flash hacked (smooth) DRV firmware, then swap back the steering wheel. Subscribe, thank you.
First of all, do you know your BLE version and Motherboard version? If you flash those files to mainboard V3.1 it will brick your scooter. With "m365 DownG" you need to point to that zip file. Subscribe, thanks.
Option 1 - buy a st-link, solder to the dashboard, and downgrade. Option 2 - find someone with a scooter that is still on old firmware, swap the steering wheel (in which is located BLE) then downgrade BMS and flash hacked (smooth) DRV firmware, then swap back the steering wheel. Subscribe, thank you.
Hi! I have 1s Nordic edition which has a limit of 20km/h. Same characteristics as 1s standard, just lower speed limit to meet the local regulations. My BMS firmware version: 1.4.1 My firmware version: 3.2.1 Do you know if it will work for me? 🙏
You have BLE157 which prevents flashing. You can do that: 1. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YAexlwq47q4.html or 2.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IvQ4oT2u_vg.html As far as I know, Xiaomi locks the speed according to the serial number of the scooter, and I don't know if the hacked firmware bypasses this in some way (perhaps yes). I can't check since I don't have a German or Nordic model. You can ask about that in this telegram chat: t.me/scooterhackingchat Someone definitely will help :) Subscribe, thanks.
@@1870gazman Those are locked firmware: Xiaomi Mi 1s - DRV321 BLE157 BMS141 Xiaomi Mi Pro 2 - DRV248 BLE157 BMS141 Xiaomi Mi3- DRV016 BLE155 BMS141 I assume you have mi3, so BLE155 is locked. Head swap bypass: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YAexlwq47q4.html Ble downgrade with stlink: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IvQ4oT2u_vg.html Before that, you must know your ESC version, more on that: rollerplausch.com/threads/neuer-controller-v3-1-bei-aktuellen-xiaomi-rollern-brickgefahr-bei-drv-downgrade-vorgehen.5187/ Subscribe, thanks.
Good evening I would like you to answer a question I took the steps you showed to increase the miles of the skate I did it two or three times it succeeded but I brought it back to normal because I was afraid something would happen to the police and again I try to do it now and nothing catches That is, burn which I do the steps you told me correctly that you showed in the video but do not go up the kilometers you can help
Probably you have updated to the newest official firmware with mihome app. I reverted today to stock firmware and updated it to the newest one with mihome app, after that there is no longer possible to flash custom firmware. Looks like we have to wait till someone will discover the way to flash from new firmware over BT. And that's what I found on www: "the DRV321_BLE157_BMS141 update was rolled out for the 1S on March 21, 2022. If you have already installed this on your scooter, then this is the end for you. The scooter must be written with a programmer (ST Link v2) so that you can use your own modified firmware. This is no longer possible via Bluetooth (as of today)".
Hey man! I tried doing this to my xiaomi 1s but it still only tops 26kmh/h with full battery. Do you know why? (Edit) I downloaded the smooth firmware and flashed the scooter with downG and I followed all of your steps in order
@@MindaugasJocionis just checked the tire pressure and the tires are rock-hard and the scooter is brand new as well. I got a bigger extra tire when I bought the scooter. Do I need that?
@@yo420-yo7 You need to measure exact pressure, as those tires are not like bicycle tires, they are like car tires (with a cord inside). Even deflated they are stiff. After some time my scooter dropped down from 29-30km/h to 24-25km/h, everything went back to speed after tire inflation. That spare tire is the same size, it just looks different :) Check tire marking or manual for correct pressure value. amzn.to/3HKDfJz
Probably you have the latest firmware. I reverted today to stock firmware and updated it to the newest one with mihome app, after that there is no longer possible to flash custom firmware. Looks like we have to wait till someone will discover the way to flash from new firmware over BT. And that's what I found on www: "the DRV321_BLE157_BMS141 update was rolled out for the 1S on March 21, 2022. If you have already installed this on your scooter, then this is the end for you. The scooter must be written with a programmer (ST Link v2) so that you can use your own modified firmware. This is no longer possible via Bluetooth (as of today)".
Ninebot has its own speed hacks, do not use this method for your scooter! Check this forum: www.scooterhacking.org/forum/viewtopic.php?t=529 maybe they will help you. And don't forget to subscribe, thx :)
I just bought the xiaomi 1s & in my country they do something to reduce the speed down to 20km. Is it possible to make back to its original speed 25km? Pls
Use option "change region" in-app "Xiaoflasher", and you will get 25km/h back :) play.google.com/store/apps/details?id=eScooter.m365Info&hl=en&gl=US Subscribe, thx :)
