Xiegu X6100 I/Q Out with HDSDR - Walkthrough Tutorial - Rig Control! 

You could be right. I pinned the comment in the event others don't have the 192000 option. Thanks!

You're correct. You usually need a higher end audio interface. There are some stereo line in sound cards but most are mono mic inputs. However a sound card with a line-in is usually stereo.

Most USB sound cards nowdays are stereo and the sampling rate is typically 48khz unless you have a high end sound card.

Thank You, Sir.

Thanks Dude need to whatch this again

you're a regular Dr. Xie

You Too buddy!

Thanks!

Thank You!

Many thanks!

I'm terribly sorry. I had it working with V1.2 and had no issue. I did upgrade to 2.1 and had some issues, but eventually got it working. I would suggest V1.2 for now. I updated my description (my fault). Let me know on discord if you are still having issues and we can walk through it

Ive yet to figure out out, but I'm assuming it has to do sm with another setting in the software that needs to be tweeked. I'll look into more when I had a few moments

Wider bandwidth available to view

I like SDR Console a lot and has built in server so I can use the radio remotely on another Windows machine, for RX, I get exactly the same SDR experience remotely as I do from the main computer. SDR Console can TX too but not sure what radios are compatible for this.

I got rid of the radio when xiegu started the elimination of features like IQ out. Sorry to say

It worked great for me for both line in and mic in. Both of those I can set to 192000. Although that's a good point about stereo. Thanks for the input, it'll probably help others having an issue

You're welcome. I am uncertain if this still works though. Xiegu has a history of pulling features from Firmware.

@@HAMRADIODUDE sadly, I discovered this when I tried to set this up. ¯\_(ツ)_/¯

Thank you!

Also, use the tune offset by at least 10 kHz up or down from the centre.

I don't think so.

Hi Robert. At the time I finally decided to get rid of the radio, xiegu had removed the capability for IQ out. Horrible decision on their part. Since getting rid of this radio however, I'm on certain whether or not the features available again. Everything I see kind of says no. Sorry to be the downer. Maybe there's a workaround, this radio is just too pieced together for me

@@HAMRADIODUDE that's a marketing mistake. It's not as if their non-Chinese customers can replicate the hardware at Xiegu's price point. Opening up that HW for end user tinkering means free engineering NRE. Hmmm. I bet they are worried about counterfeit and copy cats from other Chinese manufacturers. Karma's a bitch, eh?

Thank you!

I got rid of the radio

I was fairly disappointed after this video came out, because I wasn't able to find a way to use IO anymore. I sold the radio

@@HAMRADIODUDE Oh Right they have removed the option that's a bit of a pain then.

@@ciscokiduk Yes, this radio no longer works with HDSDR, Ham Radio Dude should update this video.

To be honest I'm not sure. Unfortunately they took this feature away from the radio and then I got rid of it

SDR-DXobserver, Which input do you use in SDRconsole? I asked Simon, and he replied that he did not know if it is possible to use SDRconsole for this specific task.

I don't have the answer, I no longer have the radio and can't test it again. Sorry

Unfortunately I don't remember

Yeah. It's silly they got rid of it

It may just work without having to enable it

What type of antenna?

@@HAMRADIODUDE Alpha J-pole Sr 6-160

I heard they disabled it in the latest firmware (12/29). Kind of upsetting

@@HAMRADIODUDE Damn. Still not there in 1/17 firmware either

Yes, SDR Console is really fantastic and so is it's built in server function which allows someone to use their radio from anywhere with full control with SDR console installed on the remote laptop. With SDR Console one can TX too but not sure if the 6100 is compatible with TX using SDR Console and 6100 ? I use it with my 7300 and Airspy HF+, got the ptrx 7300 panadapter, was never happy with the audio quality from the 7300, too much sacrifice was made in order to have so many features, I like the 7300 but the audio is not good, my FT-891 sounds vastly superior. But having the waterfall on a 24 inch monitor made a massive difference.

I've been playing around trying to get it to work.

@@HAMRADIODUDE It's been a while since I set up SDR Console to work with my Airspy HF+ but you need to add some DLL to the sdr console folder. Might be better to ask on groups.io. But once you have a compatible DLL you can then select the radio from the definitions on SDR console.

Same here, SDR-console every day of the week. It is more flexible, accurate, way better waterfall and more usability and feature rich. Here there is an I/Q crossover suppression, so there is no fat (fake) signal in the centre of the screen. Also, the S-meter is spot on when set correctly, and you have an SNR metering, which is the one to use to evaluate real signal strength.