Тёмный

XJ Rear Wheel Well Trim 

BleepinJeep
Подписаться 564 тыс.
Просмотров 222 тыс.
50% 1

Looking to move up a tire size, but not go up in lift size? This is your answer. Trimming your fenders will allow you to be able to fit a slightly bigger tire without more suspension modification. It is a cheap and simple way to minimize your center of gravity and optimize your coolness in the Jeep community!
You'll need an angle grinder: amzn.to/2dW5Ge4
I recommend these cutoff wheels: amzn.to/2fxMxzI
And a Rubber Mallet: amzn.to/2e6mV80
Website: www.bleepinjeep.com
FaceBook: / bleepinjeep
Patreon: / bleepinjeep
Music by WE FEED ALONE: apple.co/1PkBDpN
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.
03481

Авто/Мото

Опубликовано:

 

24 май 2016

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 89   
@tobysan9057
@tobysan9057 8 лет назад
Best video ive found on doing this, and finally after watching a couple times i cut into my cherokee lastnight, keep up the greatr work and great videos guys
@eclipsebmx
@eclipsebmx 8 лет назад
i did that for my XJ a while ago and i suggest you buy automotive caulk and before u fold the fender in, fill up the space between the fold and wheel well. otherwise the vertical cuts u did will stay open after folding and water will get in.
@DestDroid
@DestDroid 6 лет назад
Does that video exist?
@bradlfsh
@bradlfsh 2 года назад
that's a clean job for the rear. Great video too. I wish the Previous owner of my xj had watched this but I can tell he didn't know what he was doing or didn't care one
@L3th4LShad0w
@L3th4LShad0w 8 лет назад
I want to see a rear cut video where you don't comp cut but you cut out like the front and weld sheet metal in the gap, I've seen it on pirate and it came out awesome
@shadsikes
@shadsikes 8 лет назад
Good Video. Love the stache, and the chili peppers sticker!
@roccoliace7484
@roccoliace7484 8 лет назад
Good Work, straightforward and detailed. thanks for sharing.
@1SYCRYD
@1SYCRYD 4 года назад
It's a XJ, it was made for this
@jacobpollock4677
@jacobpollock4677 8 лет назад
I've been waiting for a video like this thanks
@dezertol
@dezertol 8 лет назад
That's a nice simple method good job .. I'll be doing that to mine soon.
@BradleyBeeksAdventures
@BradleyBeeksAdventures 3 года назад
I’m doing mine today, just finished the front up!
@benjaminvolesky1653
@benjaminvolesky1653 8 лет назад
awesome video! hope you do more!
@frankpryor2755
@frankpryor2755 8 лет назад
Super...! Good vid, that's cool👍
@traviscurtis439
@traviscurtis439 8 лет назад
Another good video, thanks.
@NeilKudro
@NeilKudro 7 лет назад
You could have also used the rubberized under carriage spray to prevent future rust. That stuff work like magic and around $5 a can and would go a long way. Thanks for the video bro
@timothymoran622
@timothymoran622 7 лет назад
Jeep I bought was for a toy seeing how the unibody was solid and liftable so I started to trim my wheel wells and due to some Michigan rust it went too far and some of the tub is missing, any cheap ideas how to make it look presentable
@Wildsurf52
@Wildsurf52 8 лет назад
do you have any videos on how to do this but with a zj?
@fraziermedina8488
@fraziermedina8488 8 лет назад
never mind.. I already did this, I was looking on how to cut it up further
@rickn.2437
@rickn.2437 7 лет назад
what size n brand are those tires? looks very nice bro
@randyanderson6110
@randyanderson6110 4 года назад
What's the thought process behind the stickers? Is your plan to cover the whole vehicle?
@bdr5150
@bdr5150 5 лет назад
How close did you get to the second piece of sheetmetal to the inside of the cab? It seems pretty close. Im about to do this and it just looks like my wheel will hit that second piece. You have any tips?
@moejr14
@moejr14 8 лет назад
what impact gun were you using? I'm looking for a decent one.
@leonelplascencia2990
@leonelplascencia2990 8 лет назад
what about front?
@waynesanders1406
@waynesanders1406 6 лет назад
I found out the hard way way a pinch weld was when I cut it open. Much regret. I still have to find a way to fix that. I was told fiber-glass resin is the sturdiest way to go about it. If I ever do that I might make a video because I'm sure I'm not the only one out there.
@ironicchannelname6457
@ironicchannelname6457 7 лет назад
mine was cut before I got it any way to fix it
@hotkeys9102
@hotkeys9102 6 лет назад
what size are your wheel spacers?
@welivejeep3054
@welivejeep3054 8 лет назад
So your that guy with all the stickers! I've seen your jeep from somewhere. I think it was Cherokee forum, maybe Instagram.
@AaronsAutomotive
@AaronsAutomotive 8 лет назад
i thought you said this wasnt a cut and fold video..... sure looks like one to me...
@jamesgrantham9311
@jamesgrantham9311 7 лет назад
Did this to my 94 country fully factory armor and can barely shut the doors it twisted up so bad. If i ran a tire up on a rock to show off, I wouldn't be able to open the door, if I did you'd have to roll off before you could. On that note... Also did this to my 96 sport, and had no issues at all. Not anywhere near the same armor. Same procedure exactly. Both no rust, no wreck chassis. Go figure.
@billlagudas
@billlagudas 6 лет назад
What kinda of rock sliders are those?
@DonAmorTejano
@DonAmorTejano 8 лет назад
What size wheel spacers?
@gatordave6629
@gatordave6629 3 года назад
Wish you would have show where the pinch welds actually were since you can't see them
@CrockasaurusHD
@CrockasaurusHD 8 лет назад
How many pounds of torque?
@abitbraindead8057
@abitbraindead8057 3 года назад
I know this is super old. But what if the previous owner cut past the pinch welds. How could I fix that
@ezdankie
@ezdankie 8 лет назад
What part of CT are you in?
@lycanfennex83
@lycanfennex83 8 лет назад
was wondering...i see that you have extensions for the tires...i have heard they will mess up the axles and such is that true?
@cb550rider
@cb550rider 4 года назад
They're called wheel spacers as long as you torque them down correctly you can go up to a 2 and 1/2 in and it won't give you any problems anymore than a wheel that is offset. 3 inch wheel spacers on a Toyota and didn't have any issues
@rcaragman
@rcaragman 3 года назад
I guess if u want to do this I cut pass the weld and made it higher up and welded back
@bdr5150
@bdr5150 5 лет назад
If i did this to my 99 4 door, what fender flares could i still use with this?
@bleepinjeep
@bleepinjeep 5 лет назад
Buy the flares first... then cut to fit. I think Napier fender flares has a set for this.
@IllRockYourSox1
@IllRockYourSox1 8 лет назад
My Cherokee has some bad rust eating through the passenger side rear fender. How can I get rid of the rust? I was planning on doing the cut and fold method, but I'll have to clear out the rust first.
@IllRockYourSox1
@IllRockYourSox1 7 лет назад
***** Thanks for the help, but I no longer have the jeep.
@pawcrawlowens8730
@pawcrawlowens8730 4 года назад
I can't do this to my one owner 32k. 2001 limited, the green paint is so beautiful, still has new car smell.
@lelandeggleston1041
@lelandeggleston1041 8 лет назад
Ty
@fraziermedina8488
@fraziermedina8488 8 лет назад
hahaha I was trying to search for this yesterday
@chadgdry3938
@chadgdry3938 8 лет назад
very nice...
@TheBulski
@TheBulski 8 лет назад
Did you torque the nuts while the wheel was off the ground? I've always been under the impression to tighten them, then drop the vehicle, then re tighten and torque
@ohsee1346
@ohsee1346 5 лет назад
Nah, its the same as having less backspacing on ur wheels
@halfchocolatecow3501
@halfchocolatecow3501 5 лет назад
@@ohsee1346 Wrong comment
@MrJayArt
@MrJayArt 7 лет назад
That is the cut and fold method 😂😂 and it's not a car hahaha
@lavachemist
@lavachemist 6 лет назад
When he said this isn't cut and fold, I think he was referring to the lower QP cut and fold.
@modifiedgarage1006
@modifiedgarage1006 6 лет назад
6 lug??
@michaelholguin690
@michaelholguin690 6 лет назад
So he cut at the lower body line by the bolts, is it possible to go all the way up to the upper body line?
@bleepinjeep
@bleepinjeep 6 лет назад
Not unless you want to see inside the vehicle
@michaelholguin690
@michaelholguin690 6 лет назад
just to clarify I was talking about the vertical cuts in between the pinch welds, you only went to the first line closest to the bolts if you keep cutting vertically up to the second line will still separate it?
@joshuapennekamp4333
@joshuapennekamp4333 3 года назад
Okay, dumb question, I would like to mount a set of larger tires. Stock suspension, (maybe upgrade to 2 shocks on each corner instead of 1, upgrade gearing ratio) and cut fenders, could I fit a 32" tire?
@schulzy1544
@schulzy1544 2 года назад
You could always use longer bumpstops if it rubs
@TwinSummrs
@TwinSummrs Год назад
im running 33s and it rubs with no lift. if your not offroading its fine but if you plan on wheeling you will need to lift.
@jacobdeem1328
@jacobdeem1328 8 лет назад
dude...that stache!
@khalidwalid3807
@khalidwalid3807 8 лет назад
I got a question for you Sir, Recently I installed a RC 3inch lift kit on my 1995 Jeep Cherokee. After installation I realized I wanted more lift than 3 inch. What do you suggest I should do now? should I replace the 3 inch lift kit with 4.5 inch or should I add something else and lift it more? Need your suggestion and help. Thank you Khalid from CA
@khalidwalid3807
@khalidwalid3807 8 лет назад
+Jacob BleepinJeep do you have to install a 4.5 inch all over again or you can modify the 3 inch into 4.5 inch
@khalidwalid3807
@khalidwalid3807 8 лет назад
+Jacob BleepinJeep how big i can go on tires with 3 inch lift. and how much offset on the rims with no rubbing
@bigmetal4194
@bigmetal4194 6 лет назад
And this still leaves enough material to add Napier flares later?
@bleepinjeep
@bleepinjeep 6 лет назад
Napier has some flares specifically designed for cut and fold quarter panels.
@bigmetal4194
@bigmetal4194 6 лет назад
I just watched your tire challenge vid you posted today, great stuff. Also ordered a sticker for my jeep to show my support, thanks Matt.
@bigmetal4194
@bigmetal4194 6 лет назад
Hey Matt I ordered a bleepin jeep fan decal but got a my other jeep is a jeep decal LMAO. I'll send it back if you like but can I get the other one thanks so much
@bleepinjeep
@bleepinjeep 6 лет назад
Sorry about that, please send us an email from the store contact page with your name and info.
@AlexLeon-ig2wm
@AlexLeon-ig2wm 7 лет назад
question; how much lift u got on thus xj?
@brandonlow27
@brandonlow27 8 лет назад
What axles are those? I notice they are six lug
@jeffreyanderson7349
@jeffreyanderson7349 8 лет назад
its a 5 lug to 6 lug wheel adapter.
@jeffreyanderson7349
@jeffreyanderson7349 8 лет назад
Oh ok then. Never seen a 6 lug jeep axle :P
@traemiller5523
@traemiller5523 8 лет назад
there's enough info on this mod, how bout something else?
@93cherokee37
@93cherokee37 7 лет назад
damn you hammer fast. lol
@stephenthompson1319
@stephenthompson1319 7 лет назад
93 cherokee I
@billyraybullington3038
@billyraybullington3038 8 лет назад
You referred to your Jeep as a car.....
@GT_V1nnyy
@GT_V1nnyy 8 лет назад
Jeep code 101.. I will refereth to my jeep, not as a car, nor suv, nor truck, but as a Jeep. Amen..
@chrispierson1004
@chrispierson1004 5 лет назад
facepalm*
@jenemcik
@jenemcik 7 лет назад
it's not a car!!!!!!!!!!!!!!
@moejr14
@moejr14 8 лет назад
sweeeeet
@edwardfinch2
@edwardfinch2 8 лет назад
Jacking up the car! He says! Wtf!
@chrisdubya
@chrisdubya 8 лет назад
As soon as he called the Jeep a "car" I NOPED out of the video.
@nibbzs15
@nibbzs15 8 лет назад
when a JDM boy buys a XJ SMH
@Tastauer
@Tastauer 6 лет назад
Please don't cut it!!! Get a a better lift kit or suspension system! Those poor man mods gonna screw up the XJ!
@cb550rider
@cb550rider 4 года назад
It's not a poor man thing it's a way to keep your center of gravity down without putting a stupidly tall lift kit on and flipping over
@ZenithClarity
@ZenithClarity 3 года назад
This just seems WRONG!
@jimjulie1
@jimjulie1 6 лет назад
Horrible idea................ Rust city.... here I come!!!!!!
@willgodwin674
@willgodwin674 8 лет назад
that facial hair is nasty lmao
@zcjt
@zcjt 5 лет назад
What you want to do is get a pair of trimmers and cut that damn mustache.
Далее
How to Cut & Weld rear fenders Jeep Cherokee XJ!
12:07
Lunchbox Locker Install
16:01
Просмотров 902 тыс.
2DROTS vs RISENHAHA! КУБОК ФИФЕРОВ 2 ТУР
11:31
Plastic DIY Rear Wheel Well Liners / Jeep Cherokee XJ
49:17
XJ Rear Tire Carrier Install - JcrOffroad
16:10
Просмотров 462 тыс.
XJ Cut n fold
11:01
Просмотров 18 тыс.
XJ Notch Customs Fender Flare Install (Rear)
14:55
Просмотров 3,8 тыс.
Jeep rear fender trimming - Cut and fold
6:32
Просмотров 30 тыс.
ВЫХЛОП НА ЯПОНЦА TWIN LOOP #shorts
0:52
Помыла и машину, и водителя
0:18