Xmaxx Powered BY Hobbywing (MAX 6 G2 5690 1250KV)  

@Improvise_Adapt_0vercome . Thanks 🙏🏾

@liamquinlan9445 I used some of the Traxxas foam that come with the aluminum accessories to move it up in that spot. You would need a motor mount for the motor tho if you get the combo. Esc plate wouldn’t hurt if you don’t like to think to make it work for you. 👊🏾💯

@@LBizzyRC thank's man much appreciated.

@teeboy .Thanks for watching, got them off eBay www.ebay.com/itm/234828513108?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=CYSQMZ1TSFC&sssrc=4429486&ssuid=_qHN5f8oTRC&var=&widget_ver=artemis&media=www.ebay.com/itm/125755967886?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=j3IB6bVsR9m&sssrc=4429486&ssuid=_qHN5f8oTRC&var=&widget_ver=artemis&media=COPY

@NS-cd5yg . No complaints here with that 1250kv setup perfect. I would definitely do it again🦾.. went with that motor to try to keep everything looking stock didn’t want the ESC sitting to far foward and high 👊🏾💯

If you go 1100kv, get the Max5 or you will have heat issues.

@NS-cd5yg . I use the extra battery foam protector that comes with the xmaxx . Had a couple of them laying around, then double sided tape it in place where the sensor wire wasn’t binding.

@@LBizzyRC Thank you sir! Im actually surprised that holds up with all the bashing! Will look for a similar solution over here then!

@danny1483 . All I can say is, it has better throttle response,smoother way more power curve and control. Not throwing shade but Stock esc is lacking tuning options. Plus the sensored set up has a better feel IMO. 👊🏾💯

@normankeller1975 . Running 1mil in front / rear and 20mil in center 👊🏾💯

Thanks brother keep it going those vids!!

@Symbio7e I use some leftover battery foam spacers just to lift it up bit.

@@LBizzyRC interesting I never thought to do that. I'll be checking to see if this can work for me.

@user-xq5tb4vf3b . Everything sounds/feels real smooth no problems at all👊🏾💯

@Xbot4Life . Yeah punch 9 is the new 5. But you have to mess wit the initial throttle response too when you turn the punch up,It’s a lot more too it then the old max 6. I just left everything stock . If you turn the punch up make sure you have high C rated packs.👊🏾💯

@@LBizzyRC 9000Mah 100c Zees 😎 Thanks dude 👍🏾

@@Xbot4Lifebash on bro👊🏾💯

@timbootz8894 . I took out the TQ running spektrum

@@LBizzyRC ok I might be doing the same if this sensor wire acts up on me.

@Xbot4Life . I would just leave it on there for now and shrink wrap it, you might want to use it later if you decide to get the motor. 👊🏾💯

@@LBizzyRC True, thanks!

@joshuahead2375 . That’s a PNWRcmadness motor mount.

Yes sir so much power🦾

@Harvz78 that’s a PnwRCmadness motor mount

@LBizzyRC Thanks!👍

@johnnymckissick2735 . Yes sir!!! Temp guns and burnt fingers is a thing in the past 😂😂😂🤣

@@LBizzyRCwhats the top speed with that set up?

@@johnnymckissick2735 I hit 60 mph probably could’ve got a lil more if I had more room

@prestondillon9279 . That spur and pinion I got off eBay. www.ebay.com/itm/234828513108?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=CYSQMZ1TSFC&sssrc=4429486&ssuid=_qHN5f8oTRC&var=&widget_ver=artemis&media=COPY

@ProperSkill . Sorry you’re having bad luck wit Hobbywing, i just run mine stock settings,only adjust bec voltage for my servo. Never had battery connectors melt. I guess when you max out everything and run weak batteries/connectors that’s what happens.👊🏾💯

user error

@gonzodetroitify . Thanks for watching 🙏🏾 👊🏾💯