Тёмный

Xmaxx Vitavon MOD 1.5 GEARS!!! 25/30!!! 

Exocaged RC
Подписаться 74 тыс.
Просмотров 47 тыс.
50% 1

I LOVE EM!!! Quieter than any other mod 1.5 gears I've had so far!!! Links are below for the entire setup for this truck, use them to help support Exocaged RC, Thank you guys!!!
Vitavon Xmaxx Mod 1.5 gears and motor mount and gear cover on ebay
Motor Mount ebay.us/VO4cD3
Gears (appears to be sold out)
Gear Cover ebay.us/nmnZp4
All the Vitavon for the Xmaxx
ebay.us/Ra6SGT
Xmaxx Wide Kit
traxxas.com/ne...
Xmaxx
Amain bit.ly/3jiCOwR (Orange)
Amain bit.ly/3zneqQE (Red)
Amain bit.ly/2TYt7JD (Rock N Roll)
Amazon amzn.to/3EnWurc (Green)
Amazon amzn.to/31x9lsK (Red)
Amazon amzn.to/2ZWne34 (Orange)
Amazon amzn.to/3dmV44j (Rock N Roll)
Castle XLX2 with 1100kv motor
Amain bit.ly/3t8K7KW
Amazon amzn.to/3xV6Fkw
Ebay ebay.us/oHRcMi
Vitavon Bellcrank
Ebay ebay.us/V5Hq57
All Vitavon Xmaxx stuff on Ebay
ebay.us/SulCRQ
Traxxas 2085x Servo
Amain bit.ly/3osWosE
Amazon amzn.to/3omHFj3
Ebay ebay.us/olFTaA
Proline MX43 Tires with Beadlock Wheels
Amain bit.ly/3AI6Job
Ebay ebay.us/RunQli
Proline MX43 Tires with Beadlock Wheels
Amain bit.ly/3AI6Job
Ebay ebay.us/RunQli
CHANNEL MEMBER INFO
If you would like support Exocaged RC Directly, consider being a channel member. Cheap monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. Take a look! / @exocagedrc

Опубликовано:

 

6 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 181   
@daysdesigns
@daysdesigns 2 года назад
Better yet... check out the engineering behind the M2C motor mount and top brace, etc. It's amazing and stops that xmaxx flex in the chassis!
@Matt-zo2ju
@Matt-zo2ju Год назад
I installed this setup and I stripped clean that transmission gear
@MrBumbles2
@MrBumbles2 2 года назад
Yea sat down n priced a viti xmaxx, well I just bought a 97 f 150 with 60,000 miles cheaper. Lol.
@ExocagedRC
@ExocagedRC 2 года назад
😂😂 I can’t argue with that!
@MrBumbles2
@MrBumbles2 2 года назад
@@ExocagedRC there are a few different rear body supports out there to 3d print. i used this one , worked pretty good till the fire.....ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TpjOCDW7OV0.html
@slarmond38
@slarmond38 2 года назад
Yeah that hair! I like that shaft support though
@joseCalderon1976
@joseCalderon1976 2 года назад
Yeah 25/35 gearing is what the 1100kv motor should run. I think I tried running 25/30 on the HW Max 5 and 1100kv motor combo since that's the only spur gear that I had at that moment. My Max 5 hit thermal very quickly. So I went back to 25/35 gearing. Great video as usual. They should have added a support at the end of the motor TBH
@ExocagedRC
@ExocagedRC 2 года назад
Yeah man. The Max5 and HW 1100 is a smaller system
@shuster1921
@shuster1921 2 года назад
That thing sounds like a different truck!! Smooth and quiet, excellent upgrade!!
@runngunrc1991
@runngunrc1991 2 года назад
Joe Flex seal your body’s they should last longer that bearing is a game changer!!!
@Captinfun101
@Captinfun101 2 года назад
That is the best xmaxx aftermarket gear mod for 1.5 I’ve seen to date . Very nice ,I need one now!😜👍🏼🤜🏼🤛🏼
@jdsrcs8061
@jdsrcs8061 2 года назад
Wow cool mod!!! Did you get the new Vitivon Faux-Hawk!?!?!🤘🤞🤞
@jhawk1985
@jhawk1985 2 года назад
Its a pho-pony-hawk🤣
@jake4194
@jake4194 2 года назад
Haha
@markchrist3438
@markchrist3438 2 года назад
Hey joe I think you will be as pleased as I am with the BRUTE body for the Xmaxx, worth the money!!
@jakethole
@jakethole 2 года назад
I wonder how this compares to the new M2C mount. Wonder if you could combine the rear m2c motor mount with this setup. Looks like that would be the ticket.
@SolRayz
@SolRayz 2 года назад
It seems like a nice mount, but the m2c seems to have the advantage of adjusting your mesh from screws on the side of the mount.
@brentbocchetti4666
@brentbocchetti4666 2 года назад
I have the m2c motor mount system and just ordered the vitavon 1.5 gears and the cover. I'll let you know how it works out when everything shows up
@laylowreel1969
@laylowreel1969 2 года назад
@@brentbocchetti4666 any updates ?
@brentbocchetti4666
@brentbocchetti4666 2 года назад
@@laylowreel1969 yeah! I actually just got them in yesterday, and had a few mins today to get the gears in at least. I already ran into an issue with that little support piece that goes on the end of the shaft. The motor mount extends above that slot where it goes a little bit. So it looks like I'll have to grind the motor mount a little bit just to get the gears in. Because of that I'm not sure if the motor mount will with without some grinding, but I'll definitely keep you guys posted! I'm hoping I'll have more time later today or tomorrow mess around with it.
@brentbocchetti4666
@brentbocchetti4666 2 года назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-F0aIWdJbpts.html I just made a quick video talking about where I've got up to this point. I'll make an update one once I get some packs through it.
@gadgetmantwincities
@gadgetmantwincities 2 года назад
I would love to hear your impressions on the new XMAXX wide arms!
@gadgetmantwincities
@gadgetmantwincities 2 года назад
What I mean is are the standard arms better in any way. Did the wide arms change the way it flys, is the mod worth it etc.
@ExocagedRC
@ExocagedRC 2 года назад
Better for turns, I haven’t noticed a whole lot of difference in the air.
@777beanz
@777beanz Год назад
that hairdo Exo😂😂😂
@dayadam16
@dayadam16 Год назад
Do you loctite your gears? Ive always had an issue with keeping regular pinions on. Im currently running a d shaped bore but need to go up in gearing as 23/35 is to slow for me. I just ordered a 26t 1.5 cause it needs more wheel speed for more air control.
@Niobium23
@Niobium23 2 года назад
Great advice bro! I ordered the hobby wing kit with the 1100kv, I’m gonna convert to 1.5 and try the 20/35 ratio, we will see!
@DJ_SHANNIMAL
@DJ_SHANNIMAL Год назад
Hi. Did you ever get this done? If so how is the heat? I have 1100kv hw max5 lots of m2c. Now if I just get a good ratio of speed, performance, and not burn 🔥 it all down. I’d appreciate your feedback. Thank you
@solomongathings7724
@solomongathings7724 Год назад
What did yall end up seeing?
@alphaplus4162
@alphaplus4162 2 года назад
WFO, has some great options for 1.5 mods gears ⚙....
@ExocagedRC
@ExocagedRC 2 года назад
Yep
@picklewiickle.1583
@picklewiickle.1583 2 года назад
so at max temps half that of boiling water. these are good temps nothing to worry about.
@RuisRcAdventures
@RuisRcAdventures 2 года назад
Now he's.running sweet as man. Great work Joe 👏👍
@bbeckers24
@bbeckers24 2 года назад
Drill a hole and get a rubber plug to modify it to allow you to tight pinion without removing everything.
@andrewrichey7374
@andrewrichey7374 2 года назад
Super cool we have a few guys that run them and yes they are a little loud, appreciate you sharing great video
@gillyboyNY
@gillyboyNY Год назад
Can you review the new design of the Vitavon gear cover? Looks like it’s a two piece construction, where you can take off the top to modify it fix the pinion gear without taking apart the brace.
@Livlifetaistdeth
@Livlifetaistdeth 2 года назад
Alfalfa! I might have to get some Vitavon for my Xmaxx.
@ExocagedRC
@ExocagedRC 2 года назад
😂😂
@BigCheese85
@BigCheese85 2 года назад
Good video. I removed the wheelie bar and never looked back.... I think you would benifit
@garywynegarsvikingrc843
@garywynegarsvikingrc843 2 года назад
ok ace ventura!
@mikebird8290
@mikebird8290 2 года назад
HI JOE VITAVON IS KILLING IT GREAT HOP UPS ♥️🇬🇧🇺🇸🕊️✌️👍
@jeremyperry6241
@jeremyperry6241 3 месяца назад
10 min run time jumping on the lawn off ramp would 35 spur and 20t pinion be better?
@blacksheeprc8113
@blacksheeprc8113 2 года назад
I got them gears laying here with a little stand for the extra weight that you can put in but with the m2c motor mount I couldn't get videovon gears to work
@ExocagedRC
@ExocagedRC 2 года назад
Oh. Well heck that isn’t good
@blacksheeprc8113
@blacksheeprc8113 2 года назад
@@ExocagedRC yeah it's all good though man all I always switching stuff around I'll end up using them on a different setup eventually with their motor mount or something
@SolRayz
@SolRayz 2 года назад
So wait, let me get this strait. Instead of attaching the spur gear to a D shaft held down with larger grubs, the Vitavon spur relies on those Traxxas metal pins that are weaker than mic ultra...hmm not gonna fly.
@axlerodthegreatbauman6763
@axlerodthegreatbauman6763 2 года назад
That is kinda dumb
@GarageLifeRC
@GarageLifeRC 2 года назад
Glad to see another option. Seems like everyone is sold out for some reason.
@SolRayz
@SolRayz 2 года назад
I can't believe it, but actually destroyed a wfo 25t pinion over the weekend running a dirt course hard. My mesh was fine so that's not it. My theory is that heat and friction from continual usage such as running circles on dirt track hard over and over contributed to the break down. Most people are bashing and not running continual power. I'm now greasing the pinion and spur and running the larger cover to minimize the amount of dirt getting in there. Anyone else try greasing these gears to minimize heat and friction?
@JapanRCAdventuresS
@JapanRCAdventuresS 2 года назад
your issue is the substandard WFO gears, junk!!
@SolRayz
@SolRayz 2 года назад
@@JapanRCAdventuresS what gears do you recommend?
@subradiant_music
@subradiant_music Год назад
@@SolRayz saga and hot racing
@FataL-Gr
@FataL-Gr 2 года назад
Can someone please tell me the differences between 20/30 and 25/35?
@wills099
@wills099 Год назад
I installed mine and it’s super bound up. When I put the rear cover on it locks my gears up
@ashleyconnelley556
@ashleyconnelley556 2 года назад
Should be less vibration with that all solid like it is so they should be less likely to get loose
@blacksheeprc8113
@blacksheeprc8113 2 года назад
Love them batteries as well
@glenncarlson3161
@glenncarlson3161 2 года назад
Excellent video man!! I recently got my Xmaxx and thanks for the tips. I'm definitely jealous
@toolbaggers
@toolbaggers 2 года назад
The spur gear support should be a bearing.
@HighVoltageRC3080
@HighVoltageRC3080 2 года назад
There is a bearing in it.. its small but there is a bearing there.
@ExocagedRC
@ExocagedRC 2 года назад
There is a bearing in there.
@johngookinsable
@johngookinsable 2 года назад
Dude! That hair though! I love it lol
@a007raptor_3
@a007raptor_3 2 года назад
This thing is sick would like to see the traxxas maxx v2 with the powerhobby paddle tires
@ExocagedRC
@ExocagedRC 2 года назад
I will see if they fit but it’s geared all wrong for them.
@a007raptor_3
@a007raptor_3 2 года назад
@@ExocagedRC ohhh ok thank you very much I didn't know how big they were compared to the v2 maxx thought they would be sick 🤙🏼😂
@rc-daily
@rc-daily 2 года назад
Need an aluminum chassis to really pull the heat out!
@ExocagedRC
@ExocagedRC 2 года назад
Well we have aluminum bulkhead for the front and I’m sure more will be done.
@reznya2700
@reznya2700 Месяц назад
I know this is a older video but I cant get mine to turn I got a BEC running at 8.4 on a Perfect Pass Servo and alum servo saver turned all the way down and the wheels servo just breaking the servo saver open
@ExocagedRC
@ExocagedRC Месяц назад
You will have to tear the steering down and find out what’s binding. It could be a screw too long and catching on something.
@Jeff.55649
@Jeff.55649 2 года назад
No D-bore is a big fail in my opinion!
@ExocagedRC
@ExocagedRC 2 года назад
Do you need the D?
@DeRock401
@DeRock401 2 года назад
@@ExocagedRC lmaoo
@Jeff.55649
@Jeff.55649 2 года назад
@@ExocagedRC haha :P
@timmytfpv7316
@timmytfpv7316 2 года назад
love those gears and cover my cover is on the way im looking for belted tires any clue whats the lightest belted set for x maxx
@matthewmetzger7012
@matthewmetzger7012 2 года назад
Hey Joe are you going to post a video of the Big truck bash from this past weekend. Very cool video.
@ExocagedRC
@ExocagedRC 2 года назад
Yes sir I sure am. Almost done and gotta upload it
@Imenough.
@Imenough. 2 года назад
Wish i can find these gears!!!!!
@JaySingh-ex6xc
@JaySingh-ex6xc 2 года назад
Hi Joe Great video will Vitavon be making the rear upper and lower bulk heads from aluminium as well ??? Atb. Jay.
@ExocagedRC
@ExocagedRC 2 года назад
Probably yeah. He usually gets both ends on his projects
@JaySingh-ex6xc
@JaySingh-ex6xc 2 года назад
@@ExocagedRC Thank you.
@BrianRiotHobbies
@BrianRiotHobbies 2 года назад
Do you think the gears and gear cover would work with the M2C motor mount?
@ExocagedRC
@ExocagedRC 2 года назад
Honestly I don’t know.
@BrianRiotHobbies
@BrianRiotHobbies 2 года назад
@@ExocagedRC Thank you for your reply. You make some of the best videos! I just got the wide X-Maxx kit myself but I hope to one day set mine up similarly to yours. It's awesome!
@theirishaxe9405
@theirishaxe9405 2 года назад
I gotta try those the 1.5 gears i have now are triple atleast as wide as those gears and are so loud it makes me not wanna drive.
@clayton8465
@clayton8465 2 года назад
I have a set ordered.
@daleblake8922
@daleblake8922 2 года назад
I like what you done to your hair.
@KingKrashArah-Cee
@KingKrashArah-Cee 2 года назад
Sir Exo, I've been a sub for over a year now and just to let you know I have learned a lot from you and thank you for your content. Keep it up. My question to u is: I keep stripping the rear diff ring gear. What do you recommend I do or what ring gear can I get that won't strip? Thx!
@GhostRider-ii7tz
@GhostRider-ii7tz 2 года назад
The x max is sounding good joe.👍
@butzaman5139
@butzaman5139 2 года назад
I did this on mine. Max5 esc 8ookv castle. Melted the conectors no matter what I tried. Game changer fans on motor and esc. Thinking motor kv is the culprit?
@jorgeayala2326
@jorgeayala2326 4 месяца назад
If I want to run 20/46 in my xmaxx. What gears size 1.5 should I buy to have the same power?
@BigCheese85
@BigCheese85 2 года назад
Good video man. I'm on my 4 pinion stock and I'm onto other options.
@lexsteel12
@lexsteel12 2 года назад
Can you use that Vitavon motor mount system with the Kraton 8S? Or, is it specifically for the X-Maxx? And those mod 1.5 gears, can I install them on the Kraton 8S? They really look and sound sweet.
@ExocagedRC
@ExocagedRC 2 года назад
It’s just for the Xmaxx. He has one for the 8s Kraton
@johnnymckissick2735
@johnnymckissick2735 8 месяцев назад
That tiny little beating is gonna be high maintenance. Good idea though.
@zap5026
@zap5026 Год назад
Great video Man 👊 Just got myself a max6 combo for the xmaxx, what vitavon gear ⚙️ set would you recommend for some good all round bashing without her gettin to hot 20/35??
@modzilla74
@modzilla74 2 года назад
Nice hair joe!!👍👍
@ExocagedRC
@ExocagedRC 2 года назад
Thanks!!
@jeremyperry6241
@jeremyperry6241 3 месяца назад
what are ur temps mine is at 190f hobbywing max5 and 1100kv
@pyroman6695
@pyroman6695 2 года назад
Question.. I have a stock motor in my Xmaxx but it keeps stripping my gears. Using the stock pin system to line the gears. What gears will stop stripping after a couple runs.. 18/46 gears 95% flat surface runs and I change to 18/54 when I go off roading but they all strip even being the stock Xmaxx options that come with the truck.
@ExocagedRC
@ExocagedRC 2 года назад
Have you tried some of the aftermarket gears from hot racing or even integy?
@pyroman6695
@pyroman6695 2 года назад
@@ExocagedRC I purchased a hotracing set of 18/46 gears and even they stripped. Could the pin system not not be lining the gears properly?
@SebastianLong
@SebastianLong 2 года назад
You know, the X-Maxx shouldn't need the upgrade to 1.5 mod as it SHOULD come with them in the first place. I've seen 1/10 scale RCs with 1.5 (can't recall what it was atm) and most 1/6 scale and up come with 1.5. I know my Losi's and Arrma do. I don't like how that gear is relying on a small drive pin. You'd think it would have some kind of spline system like the outdrive going into the diffs do. I've have way too many drive pins snap off in multiple RCs. One specific I can remember is the drive pin sheered of in my rear axle on the UDR. Couldn't extract it out of the axle and it took out the axle housing and the aluminum foh disk brake hex. Have them break on my Super Rock Rey axles a lot and I bought 100 extra for it.
@RichB07
@RichB07 Год назад
Very nice set up .
@AutoBodyEverything
@AutoBodyEverything 2 года назад
How’s the cnhl 8000 130C compared to the hobby 7200 100C? How much better, how big is the difference in performance?
@killaharliii4797
@killaharliii4797 2 года назад
Do you know if the vitavon motor mount will work with m2c's Esc mount system?
@BrianRiotHobbies
@BrianRiotHobbies 2 года назад
Did you ever find out if the 30/20 set would fit with the castle system?
@ExocagedRC
@ExocagedRC 2 года назад
I haven’t tried. I don’t even have those gears with me.
@BrianRiotHobbies
@BrianRiotHobbies 2 года назад
@@ExocagedRC Thanks can't wait to see the bulkhead video!
@howardsadofsky7694
@howardsadofsky7694 2 года назад
Do you think giving up the Cush drive will put stress on the drivetrain?
@tommykotlicki2839
@tommykotlicki2839 2 года назад
If I will be running a 800kv motor with 30/35 gearing and can’t use the gear cover (only fits over a 25t pinion) would the setup still function properly? I am a little confused why the gear cover is so necessary to hold it all together?
@DeRock401
@DeRock401 2 года назад
Right now I’m running the xlx2 with the 1100kv hobbywing. I got B&m gears 20/35. Wonder what I can gear it up to? I was thinking keeping my spur 35 and going 25 pinion. One thing about b&M is the gears aren’t too strong. I already broke a tooth on a spur gear and I now replaced with a WFO 35spur gear.
@ExocagedRC
@ExocagedRC 2 года назад
Well Vitavon has 20/30 and these 25/30. For the smaller 1100kv the 20/30 would be good. I like these 25/30 though.
@DeRock401
@DeRock401 2 года назад
@@ExocagedRC ok 👌 thanks
@axlerodthegreatbauman6763
@axlerodthegreatbauman6763 2 года назад
I did this two years ago….to both my xmaxx’s
@nick_stag
@nick_stag 2 года назад
Man don't you love when your rc just performs well and correctly. Can you link me to your tool tips ! Please! I need some new ones I stripped out my 2.5
@ExocagedRC
@ExocagedRC 2 года назад
Bowhouse RC is what I use the most.
@ajrenn15
@ajrenn15 8 месяцев назад
Can it be used for 30 30 gears 1:1 ratio?
@JmanZ71
@JmanZ71 Год назад
What kind of speeds can you get on that setup buying the parts to do mine. Do you think those gears would be compatible with m2c complete motor mount setup?
@DoubleADay
@DoubleADay 2 года назад
You need to design a parachute mod to avoid the inevitable body damage
@ExocagedRC
@ExocagedRC 2 года назад
LoL that would be epic. But then I’d want to put it 50ft up to test it.
@lowblueranger
@lowblueranger 2 года назад
Have you ever had an mx43 tire blow out on you? I did tonite, not even wot or air born? I’m running 30/50 gears with 1100 hobbywing motor.
@subnova91
@subnova91 2 года назад
So when is Vitavon going to make HD Diff ring gears?
@jrambo8784
@jrambo8784 2 года назад
25 is the pinion 30 is spur, correct?
@oscarmike131
@oscarmike131 2 года назад
all this set up with the 1100kv motor can i use the stock esc with this set up? thanks
@allanmrozek4414
@allanmrozek4414 2 года назад
No end bell support?
@RichB07
@RichB07 Год назад
Just got the max6 combo 1100kv . i'm confused now . Whar gears is best to run ? i've seen so many different ones .
@johngantner9314
@johngantner9314 2 года назад
will the pinion, spur, and gear cover work on stock motor and mount?
@ExocagedRC
@ExocagedRC 2 года назад
No sir these are set for 8mm shaft motors
@senseiDi
@senseiDi Год назад
man those shocks are soft !!!
@epicdemic215
@epicdemic215 2 года назад
Will the 1717- 1650kv Traxxas XO-1 motor fit? It’s the motor made by castle creations
@rcpete7055
@rcpete7055 2 года назад
You were definitely that kid who stuck his hair up in the bath into a mohawk 🛀😂👍👍😎
@ExocagedRC
@ExocagedRC 2 года назад
LoL yep!!
@johnmcmurphy1007
@johnmcmurphy1007 2 года назад
Man that's great! I have have the same Vitavon Setup now with a Leopard 58113 V2 1050kv! 😁😃 Will change from 25/30 to 25/35 because of heat issues with the Max5. How tight do you align the gears? Do you leave some space between the teeth or do you set them close together?
@MrCovain
@MrCovain Год назад
Did you ever switch to 25/35 gears? I have 1100kv motor with mamba x with 25/30 gears. Haven't ran it yet. You got me worried about heat
@Totemwolfdog
@Totemwolfdog 2 года назад
Anyone information on the vitavon xmaxx diffs? I saw them and wasn't sure if they would be worth it.
@NCMOUNTAINSbackyardRC
@NCMOUNTAINSbackyardRC 2 года назад
Wicked power man” yeah 💪
@homeworkpictureshq
@homeworkpictureshq 2 года назад
Awesome rc car
@terryporch5332
@terryporch5332 Год назад
What speed you get from those gears
@Rudedawgmoto
@Rudedawgmoto 2 года назад
New hairstyle??
@kaptkronik135
@kaptkronik135 2 года назад
reminds me of spaceballs
@johnboy6955
@johnboy6955 2 года назад
This is the xmaxx you put the widemaxx kit on right?
@rcbasher-thelawfamilyprodu6914
@rcbasher-thelawfamilyprodu6914 2 года назад
Do you know the approx. Top speed with this set up? I have a 1100kv with a max5. Thinking maybe doing the 20/30, but Ill need to get this motor mount too right?
@TorchedRC
@TorchedRC Год назад
Love the hair bro!
@urdonercjeremyburris7541
@urdonercjeremyburris7541 2 года назад
Awesome
@jrambo8784
@jrambo8784 2 года назад
25/30 which one is pinion which one is spur??
@tonylamas8682
@tonylamas8682 Год назад
Ahahaha oh no my new body.after couple big jump and back flips we don't care the body 🤣👍
@chrisseek3771
@chrisseek3771 2 года назад
Yeah but how fast is it with that gearing?
@ExocagedRC
@ExocagedRC 2 года назад
I didn’t put a GPS on it. I’d guess maybe 50-54 in a grass field.
@frisos3944
@frisos3944 Год назад
Hey guys, Can any one tell me the diameter of the spur hole. Looks like 6mm?
@onefeather75
@onefeather75 2 года назад
Would the mod1.5 fit the stock motor?
@tegridyfilms4380
@tegridyfilms4380 2 года назад
Where did you purchase that gear shaft support, been looking all day for that piece. Also if you are a dealer, do you have a set of gears on hand, or have a website I can order from??? They are sold out on eBay.
@runngunrc1991
@runngunrc1991 2 года назад
Message the seller on eBay
@DeRock401
@DeRock401 2 года назад
Will that gear cover work with the WFO mount.
@ExocagedRC
@ExocagedRC 2 года назад
I think it will but I haven’t tried.
Далее
Xmaxx WFO gears
13:17
Просмотров 27 тыс.
Cheap Amazon MOD1.5 Gearset for the XRT and XMAXX
16:07
НЕДОВОЛЬНА УСЛУГОЙ #shorts
00:27
Просмотров 24 тыс.
GIANT RC Jet with 2 real Jet Turbine Engines
21:52
Просмотров 515 тыс.
Bowhouse RC Big Bore Motor Mount in Xmaxx 8s
15:47
Просмотров 17 тыс.
7 worst Traxxas X-maxx problems - and how to fix
10:52
НЕДОВОЛЬНА УСЛУГОЙ #shorts
00:27
Просмотров 24 тыс.