Actually, you don't have to do what I did in this video. Just push this little rod in (the center piece and all the adjustment parts should be on it), twist it 90 degrees, and pull out - it will fix in place.
Great video oli. I’m sure many of us were wondering how this was put together. I might actually get one now that they updated the core. Did you feel any difference in performance or turning feel between the two versions?
Thanks. No, I don't feel any difference in feel or performance. They both perform great. I also don't recommend taking all this apart unless you have to for some reason. I don't remember, you don't have any Tornado v3? If not, get one, it's amazing!
@@OlgaFyodorova No problem! I don’t have any Tornados whatsoever haha (Moyu fanboy alert) and I’m going back and forward between the WRM lite and the WRM 2020 as my main (didn’t like the purplev so much). In any case I‘m curious to try out magnetic-cores once and for all and this seems like a good first step into that world. I agree that there’s no real benefit to taking this apart since it doesn’t seem to need core lubing. Still it’s very confidence-inspiring to see how it’s put together. I hate having a black box where you don’t know how things work, if it’s super fragile or not, etc.
@@cubejunkie1906 Gan cubes have the most prominent core magnets, but for a WRM lover, I certainly recommend the Tornado Pioneer. The core magnets are not as intrusive as in Gan cubes, and the cube is really fluid.
OMG , Thank you so much this vedio showed me how to Fix my cube , thank you thank thank you so much or else its would be 46 dollars down the drain. 😀😀😀😀😀😀🤟
@@OlgaFyodorova i have the old pioneer since i bought it right when it came out, is there anywhere i can buy just the ballcore and put it in my pioneer?
@@her_manisz why did you buy Standard in the first place? You can buy a maglev core from The Cubicle, but you won't have magnets on corners. If you wanted ball core and maglev, you should have bought the Pioneer.
It's a GMMK full size - totally worth it in my opinion. But the keycaps are more expensive than the keyboard itself, it's GMK Fox - probably too much for most people.
Так он есть, просто не такой выраженный, как на ганах. Если не замедлять куб чересчур смазкой, то он прекрасно доворачивает, но при этом магниты не ощущаются слишком сильными. По сути, для более заметного автодоворота нужны более сильные магниты + минимальное трение граней. Это просто некомфортно в сборках. Неприятно собирать, когда куб дергается в руках из-за очень сильных магнитов. Поэтому я не очень люблю ганы. На них хочется крутить побыстрее, чтобы не чувствовать этих дерганий, и весь лукахед летит к чертям.
Take all the pieces out. Try to insert the rod in the core, pushing it and turning it 90° there. Then pull to fix it in place. If it doesn't work, carefully take out the screws and assemble everything together like I did in the video. Please reply on how it goes, because it may be useful to other cubers!
Ольга здравствуйте) Не знаете случайно как отличить ревизии куба? В новой ревизии под крышками не должно быть винта? А есть только система регулировки?
В первой были винты. Во второй пластиковые крепления, как я показываю в этом видео. Потом еще магниты на ножках поменяли - раньше они были вставлены в отдельные прозрачные детальки, а потом сделали ножку цельную с держателем для магнитов. Я думаю, сейчас уже старой ревизии нигде нет, только новые.
@@OlgaFyodorovaну в нормальных магазинах может и нету, а на Али распродают всякий хлам… Заказал уже. Не помню когда я услышал об этих крестовинах, до заказа, или после🥲
@@Krasi4 Я заказывала несколько торнадиков, себе и знакомым, все на алиэкспрессе, и первая ревизия мне досталась только при первом заказе, вскоре после релиза. Дальше были свежие. С UV-покрытием мой торнадик - самой последней модификации, с цельными ножками.
@@OlgaFyodorova еще раз спасибо за ответ) Та я сам натупил, там же на картинках все было видно. Реально в некоторых товарах куб с винтом, а в других с пластиковой заглушкой. Посмотрим, что приедет. Но вряд ли он будет отличаться от того, что указано на картинах..( С меня лайки каналу за Ваши подсказки)
It's ok, but the Tornado is overall more fragile than most cubes. I've had a few and they all have been fine, but it's the most returned cube according to SCS.
Great video, it's cool to see how everything works, but hopefully I never have to see the interior of mine lol. I'm curious about how the spring versions tensioning system work because the misalignment system doesn't translate at all to a spring if I'm understanding correctly (or do the magnets both misalign and separate?).
Also, are the core magnets slightly stronger, is the transparent ball bigger than the previous version's core? It bothers me a little feeling the contact between corners and core tbh. I put some lube directly on the magnet/plastic pieces of the corners and it made it a bit better.
@@Nehimsupacac Huh, I didn't notice any difference in magnet strength, and the corners didn't touch the core in my friend's cube. Unfortunately, I didn't compare the core sizes, and now it's too late because I sent the cube to my friend.
@@zxuuumi5420 I’m not sure. I never heard of an updated core in the standard version, and the ball core doesn’t make sense, so maybe it’s the same old core
Привет. Получается если я сейчас куплю Торнадо v3 то скорее всего он будет с новым крестом? Это была единственная вещь которая останавливала меня перед покупкой этой версии, значит круст с винтами, которые в принципе невозможно одинаково ровно отрегулировать по сравнению с вот второй версией где винтов как таковых не было.
В старой версии винты не надо трогать, там же такая же цифровая настройка. Но старые крестовины у многих ломались. Если будешь заказывать в России, то смотри отзывы или задай вопрос продавцу - у многих еще старая версия. С Алиэкспресса скорее всего новая версия будет. Я заказывала из Aircube Store - новая крестовина.
@@OlgaFyodorova Какой быстрый отзыв) Спасибо и удачи в развитии канала, у тебя классный контент, особенно интересно было посмотреть ролики про UV coating.
What screwdriver did you use to unscrew the ball core? The screws look extremely small, I'm a little scared to buy a screwdriver that's too big... Also, my core has a weird issue where even if the plastic screw is locked into place, if I push on it with a little strength, it can still fall deep into the core. It only happens to two of the screws though, the rest don't fall into the core even if I push really hard. I was wondering if you experienced this as well.
Just a little Philips screwdriver I had at home. Can't advise on brands, sorry. Why do you have to take the core apart at all? It's really tedious to put everything back together. I think it's normal. I never tried pushing the rods in (just to avoid the hassle of fixing that), but from the Cubicle help video, that's how you fix a rod that fell out. Insert it, turn it, pull at it to fix.
@@OlgaFyodorova I essentially wanted to take apart and reattach all of the pieces of the core as you did in the video to see if the rods would truly lock into place after doing it that way. I've seen that Cubicle video as well, and using that method my rods don't come out of the core, so they're "locked in" in that sense. However, they still fall into the core, sometimes when I use force, sometimes naturally. I normally wouldn't be concerned about that, but I found that my cube always catches and locks up during solves specifically on the faces with the messed up screws.
For Tornado v3, there is Standard (no core magnets), Flagship (core magnets and springs) and Pioneer (core magnets and maglev). Get Flagship or Pioneer. Standard is worse.
@@oblivionofyou5956 No, there's no difference. The new core is sturdier, but if you have an older revision of the cube with the older core, just keep using it, it's the same thing.
Привет! Если крутишь легко и любишь быстрые кубы, чтобы поменьше усилий прикладывать, то Pioneer. У меня он основной. Если крутишь более агрессивно и хочешь постабильнее - то Flagship. Мне лично в Flagship не хватает большей гибкости, что ли, я люблю кубы легкого кручения. Gan вообще не рекомендую. У меня он валяется без дела.
I want to buy the standard version, did QiYi update their plastic core to transparent core on the tornado v3 standard version?I afraid I buy it and get a fragile core (sorry my English is bad)
@@desmondchngkhaijiemoe3604 The WRM v9 standard doesn't have a magnetic core. If we compare the factory WRM v9 Standard and WRM 2021 Maglev, I'd choose WRM 2021 Maglev hands down. I'm not a fan of v9 Standard.