xTool F1 Ultra Overview

Подписаться 17 тыс.

Просмотров 2,1 тыс.

50% 1

xTool has released the big brother to the original F1 laser with the F1 Ultra! This dual 20w blue diode and 20w Fiber laser can do a lot but it is right for your shop? I'll show you how it performs and give you my thoughts on both the F1 and F1 Ultra.
Use this link to purchase the F1 or any other xTool product: www.xtool.com/...
Follow me on Instagram and Facebook for behind-the-scenes on what is happening in my workshop!
/ vintauri
/ vintaurisworkshop
Check out my Etsy and Amazon store for more ways to support this channel!
vintaurisworks...
www.amazon.com...
Amazon Affiliate Links
Digital Calipers - amzn.to/3THuR5e
3mm Baltic Birch Plywood - amzn.to/43BuYEd
CA Glue and Accellerator - amzn.to/3TZz2d5
Acrylic Paint Pens - amzn.to/4b8Ty2c
‪@xToollaser‬

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@Vintauri 16 дней назад

Use this link to purchase the F1 Ultra or any other xTool product: www.xtool.com/products/xtool-f1-ultra-20w-fiber-diode-dual-laser-engraver?ref=vintauri&

@nathanwolf5547 8 дней назад

I've added the in-line fan from XTool to my Ultra. I can cut with no flare ups now the exhaust is really moving that air. The cuts are a lot cleaner too.

@CaliVapor 16 дней назад

It’s more than double, 115x115 is 13,225…. 220x220=48,400…. Technically it’s 265% larger

@Vintauri 16 дней назад

You are correct on the math. I'll need to test the actual usable working space to know how much of it truly is workable. But having the extra area really opens up more working space to be more productive!

@CaliVapor 16 дней назад

@@Vintauri oh yeah it does open up a lot of doors, I can’t wait to see more of your projects using it. I have been learning with a 70w 800x850 laser and it’s 4 times the work area compared to 400x400…. although I find it’s more like 797x841… 🤦‍♂️ messed up a project with working so close to the edge.

@LindaGonzalez-c6h 2 дня назад

9140 Vern Station

@kevinrich4637 15 дней назад

Thank you for the review. I am enjoying my Ultra. Tried my first cut with the provided basswood and had my first fire. Small but the Ultra detected and stopped the project. Being ‘new’ to lasers if I may ask a question. I realize frequency is used with the IR. I have been playing with it but I cannot figure what that setting actually does.

@Vintauri 15 дней назад

Frequency controls the rate at which the laser pulses or fires. The frequency setting determines how many laser pulses are fired per second and affects the level of detail and precision of the engraving. A lower frequency tends to be better for deeper engravings while a higher frequency is better for detail work. Honestly for this lower power fiber laser, I don't see moving above 30khz very often as 20w is low power compared to the 60-100w fiber lasers out there these days.

@radutheimpaler62 16 дней назад

You use Fiber and Infrared as if they are interchangeable. They are not. While IR has a fixed wavelength of 1064, fiber wavelength varies depending on what element is in the optical fibers. Fiber wavelengths are all within the Infrared spectrum so technically they are IR lasers, but not all IR lasers are Fiber. No fiber optics = not fiber. Maybe you can pop the cover off and see if this has fiber optic cables or not. I'd be interested to know.

@Vintauri 16 дней назад

From what I'm told and in some of the marketing views the F1 Ultra does have a fiber element to produce the laser beam vs the diode emitter on the regular F1. I'm not ready to risk destroying this one just yet but hopefully someone can do a tear down and tell us the true type of source for this one.

@mikekleinschmidt3671 9 дней назад

I wonder if the using the Blue Diode part of the laser it will engrave bitmap or vector images in deer antler slices.

@Vintauri 9 дней назад

I did find a video of a guy using an xTool D1 to engrave deer antler slices, so I would think the 20w blue diode laser on the F1 ultra to do it as well. Deer season is coming up around here so I'll see if I can come across some to test at some point.

@kevinjensen9817 16 дней назад

My question is, why does Snoopy have Downtown Jenny’s part number on his tag?😂

@Vintauri 16 дней назад

Nothing but the best CNC bits for Snoopy!

@ClintonCaraway-CNC 15 дней назад

I'd spend a few hundred dollars more and get a 50watt Aurora Lite from Thunder Laser

@Vintauri 15 дней назад

@@ClintonCaraway-CNC if you are going for a pure fiber laser then yes you can get more power for the same money. But I don’t think that’s who XTool are going for with this machine.

@cliffgeter1105 16 дней назад

Thanks for the review. I have been using my F1 Ultra and conveyor to engrave 13.75 x 9.75 cutting boards...I am getting great marks. My customers love the boards. Getting great marks on slate as well...The F1 Ultra is not difficult to learn (my first laser)...I need to learn methods to speed up the engraving a bit. It takes 45 min to engrave a graphic intense project with laser marking from one side of the graphic to the other. Watch you and Clack every Sunday...Keep the great content coming...

@cubansli3099 15 дней назад

There are so many machines, can’t purchase expensive.

@Vintauri 13 дней назад

Hopefully as more machines come out the competition drives down the price some.

@cubansli3099 15 дней назад

Thanks though, I guess the LP 5 is more portable

@Vintauri 14 дней назад

The LP5 is more portable in it's stock setup, but it's also missing other features that this one has unless you add the optional enclosure to it. Then it's portability goes down as well.