Yamaha 9.9 to 15hp Upgrade!

Подписаться 17 тыс.

Просмотров 62 тыс.

50% 1

These old motors are bulletproof! Im not much of a mechanic, but they have never given me trouble. Everything is easily accessible and straightforward. I can't believe how good of shape this motor is in. It's almost like it's been frozen in time for 14 years. This upgrade is simple, and it makes a dramatic difference!
Follow Tricked Tins on my other social media accounts for giveaways and special offers👇
bit.ly/TRICKEDTINSFACEBOOK
bit.ly/TrickedTinsJonboats
www.TrickedTinsJonboats.com
Follow my videographer👇
/ ricomarcelophotography
/ ricomarcelophotography
/ _rico_marcelo
Follow SBFISHINGTV👇
bit.ly/sbfishingtv
My brother's company check him out👇
bremmystrong?ig...
bremmyproducts.com/2Y=
bremmyproducts.com/
Tricked Tins Crew 👇
DruYoder with Yoder boats.
www.Facebook.com/yoderboats
yoderboats?igsh...
Casey Bass With C bass welding.
/ @cbasswelding
/ cbasswelding
Simeon Terrell aka Sham4reel
/ @sham4reel764
sham4reel?igshi...

Хобби

Опубликовано:

15 май 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 120

@c.shoefish Год назад

Everything you said about that set up is completely true....I've worked on a lot of outboards in my day, and yes 4 strokes are nice...but these older 2 strokes (especially Yamaha) are just dead reliable. I'll take reliability over noise, smoke, and MPG any day on my smaller boats....big boats, the 4s are definitely nice to have. I have a Yamaha 25 and 70, and both have been amazing. Cool video bro.

@TRICKEDTINS Год назад

Thanks brotha!

@jbreefer148 11 месяцев назад

I'm learning to repair outboard motors at my Technical colledge, and recently picked up a 2003 yamaha 15hp 2 stroke. It has no spark so I did some tests and discovered that the CDI is bad. New one was ordered and hope to test it out soon. Thanks

@erichildreth7562 2 месяца назад

Good stuff and thanks for sharing and juat some info in the off road MX world Boyesen sells replacement reeds and these stock reed stops are eliminated completely. If you have thick reeds the top end power will be better and if they are thin then the low end power delivery will be better and the top end will not be due to the thinner reeds will flutter. I know this is an outboard motor but typically the two stroke motor designs tend to follow similar processes. Just an FYI.

@TRICKEDTINS 2 месяца назад

Good to know. Thanks for sharing

@rodconner9079 Год назад

Don't know anything about these things .... but dang sounds like a hellova deal!!! And yes -- 5hp is big power difference. Be Safe

@TRICKEDTINS Год назад

Forsure! The 2 stroke yamis are very sought after motors!

@andrewcoligan8044 9 месяцев назад

Hi, really enjoy your channel. I have 2 of these motors and agree completely they are the best. My 2004 has a 100:1 sticker on it and that’s what I use. I recently saw the identical motor (2009)on Craigslist and the photos clearly show a 50:1 sticker?

@TRICKEDTINS 9 месяцев назад

The old ones say 100-1 they changed it to 50-1 bc motors were blowing. Id run 50-1.

@shawnmiller8 Год назад

I've got a 2010 Yamaha 9.9 in excellent condition are there any horsepower upgrade options for this one? Any info would be appreciated for the T9.9GPLR or similar model from 2010. Thanks for any help. Cool video.

@TRICKEDTINS Год назад

Thank you, unfortunately. I don't think that motor is upgradable. They stopped making the two stroke motors in 2009

@SuperflyFootballHD 10 месяцев назад

Importing and selling 2 strokes were banned in Europe in 2007 as well. The Yamaha Enduros are sold and manufactured only for Asian markets if I remember correctly.

@TRICKEDTINS 10 месяцев назад

I didnt know that. Thanks for sharing

@smannee 9 месяцев назад

I had the 15hp version. They are bulletproof.

@TRICKEDTINS 8 месяцев назад

Definitely. I still have 2 in the shed lol

@polarisstar4958 Год назад

I got one, its the best engine ever. It just works and only sips gas😊

@TRICKEDTINS Год назад

Yessir

@seniorLu48 9 месяцев назад

I have a smaller boat so weight is my concern what is the weight of your motor? Thanks great info.

@TRICKEDTINS 9 месяцев назад

84lb

@isaiahpatterson3079 3 месяца назад

Did you ever do the video for the tohatsu motor ?

@TRICKEDTINS 3 месяца назад

Unfortunately not. I will try to get on to that shortly

@great0789 2 месяца назад

Well... I may soon be adding the Yamaha to my search for new-to-me motors! Thank you. Also, I have been looking HARD at just getting one of the new tohatsu 9.9 to convert to 20. I just looked through your video list over the last 11 months and didn't see it. Have you made that conversion video yet? (Can you point me in the right direction?) Thank You for all you do! ~ Marty M. (a local)

@TRICKEDTINS 2 месяца назад

No I have not made that video. It is stupid simple though. Just get a new 9.9 and buy the 20hp ecu. Plug and play.

@great0789 2 месяца назад

@@TRICKEDTINS Awesome! Just like the Suzuki then? With the Suzuki you replace the ECM, and remove the choke disc from the intake and replace with the OEM spark arrestor screen. Done.

@WokeYtube 9 месяцев назад

Its not HP but torque in middrange that get boat over water pressure and make it go to plane. Cc capacity is important for boat engine to get him, and load over point of max pressure.. Older 2 strokes have much bigger cc engines then newer 4strokes.. And 2 strokes can be retuned to higher power just with 2 thing. . bigger intake&carb and bigger exhaust.. And off you go..

@Truth_Seeker-79 4 месяца назад

I have a 15 hp 4 stroke Yamaha, can it be upgraded to higher? I appreciate the video!

@TRICKEDTINS 4 месяца назад

Nope

@josephatnip2398 29 дней назад

They're just like the hangKai 18

@TRICKEDTINS 29 дней назад

Idk?

@tynubernard 3 месяца назад

Don’t forget after the reeds to unlock the limiter from the accelerator canker ist a stainless little bit

@TRICKEDTINS 3 месяца назад

I have no idea what you talking about. Lol

@tynubernard 3 месяца назад

@@TRICKEDTINS the 9.9 to 15 hp need reeds adjust , and 9.9 have on the throttle inside the outboard, where the cables meet on the round thing, have little limiter from stainless steel , 9.9 if you look at carb opening , on full throttle does not open full . If you search on google you will find pictures from a guy that did this . And he test 15 , next to 9.9 also need carb adjustment just a little. If yours is not fitted with the limiter , maybe someone else take it off. I have mine from new and was there

@Leendertjuh97 21 день назад

@@tynubernard Do you have some more info? I've also converted my 9.9 to 15hp, but on low rpm it does run a little bit shaky.

@triwaves757 Год назад

I was just about to make a video on this! Let’s go fishing

@TRICKEDTINS Год назад

Ha, that's funny. Honestly, I wasn't planning on doing this video. It was on a whim. Recorded and edited last night. Im ready to fish. This weekend isn't looking to good tho.

@triwaves757 Год назад

@@TRICKEDTINS let’s roll man. Time to hit the bay

@dennisross3477 Год назад

That could be the most popular kicker motor in the N.W. for salmon and steelhead fishermen.

@jeffhenry9329 3 месяца назад

I have the exact same motor, Curious what fuel to oil mixture you are running? Yam recommends 100:1 but a lot of guys say to run 50:1??

@TRICKEDTINS 3 месяца назад

I sold this motor the day adter this video dropped. I recommend 50/1 if you want it to last

@Gruin 2 месяца назад

Fuel mix is based on the burn of the spark plug, not getting Fouled. If the book says 100:1 Mix and your running 50 parts Fuel to 1 part oil and plugs look good Burn clean, I like the idea as it Gets better internal lubrication.

@zfontes Год назад

Hey! I have a 1994 Yamaha 9.9 I’m trying to convert to a 15. Do you know if I can just pop new 15 reeds or would I have to switch the carb too? This was a great video thanks

@TRICKEDTINS Год назад

Thanks brotha. Reeds is all you need man.

@zfontes 8 месяцев назад

Thank you for responding, helps me a ton!

@r.seaboats6666 6 месяцев назад

Just picked one up, so do I need to order 15 horsepower reeds? So basically 4 parts of the reeds

@TRICKEDTINS 6 месяцев назад

Its one part. 15hp reeds

@jussialanko9197 2 месяца назад

In addition, the 9.9 hp teddy bear has a smaller carburetor throat and the 15 hp carburetor has larger nozzles. At least I saw it in the European versions. There will be a little more power, but with the replacement of the carburettor it will increase properly. Many here also think that there is only a difference in the opening of the intake valves in these older models

@gregboyes6932 Месяц назад

So I have a 1993 9.9mshr, do I need to get the reeds for the same year and model 15hp? Or are their specific ones for this upgrade?

@TRICKEDTINS Месяц назад

This video pertains to 1998-2009 models. Not familiar with yours sorry

@JohnBraman413 Год назад

where do you get the part to replace? have a link?

@TRICKEDTINS Год назад

www.ebay.com/itm/353868605968?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=hz0kde0qqda&sssrc=2349624&ssuid=xZ6HgZKcSHK&var=&widget_ver=artemis&media=COPY

@FISHERYIN Год назад

YinTin is gonna be fasttt once I do this!

@TRICKEDTINS Год назад

Lmk when you are ready. I'll do it for ya, brotha! Saw your video. Can't believe you caught a fish on that bird! Solid content!

@tomwalters100 6 месяцев назад

Great video, Thanks. Do you know if a 2004 Yamaha 8hp 2 stroke can be upgraded to a higher horsepower?

@TRICKEDTINS 6 месяцев назад

No 8hp are maxed out

@tomwalters100 6 месяцев назад

OK, thanks for getting back to me@@TRICKEDTINS

@az-9658 Год назад

Good day boss Actually I have a 9.9 engine and I don't know how much space is required to expand the reed valve

@TRICKEDTINS Год назад

I'm not sure I understand. I'm assuming you want to try to bend your own reeds?

@TRICKEDTINS Год назад

You can do that but i'm not sure what the specs should be. I would recommend just buying the fifteen horsepower reads and replacing it

@az-9658 Год назад

@@TRICKEDTINS Excellent. Have you had any engine problems?

@Leendertjuh97 21 день назад

Just bend it to 6mm!!

@patdelaney9957 Месяц назад

A little confused here...I have a 1999 Yam short stroke and plan on the upgrade. I only need to replace the reeds and use the old carb ? Or do I buy a new carb with the 15 hp reeds ? Also, do you recommend me changing-out the impeller ?

@TRICKEDTINS Месяц назад

All you need is 15hp reeds. Carbs are the same. Impeller has nothing to do with power that's for the waterpump and yes if you haven't changed it I recommend it.

@patdelaney9957 Месяц назад

@@TRICKEDTINS Thank you for the response, have a good one !

@user-ek8dy3xo8c 10 месяцев назад

QQ - I have 2002 8hp high thrust 4 stroke- can I jump that to a 15HP or just to 9.9?

@TRICKEDTINS 10 месяцев назад

8hp mptor can only go to 9.9

@user-ek8dy3xo8c 10 месяцев назад

Thank you! Does anyone have the part number for the 9.9 carb that is needed?

@thatdudetroy Месяц назад

will this work with bigger motors like a 20 hp?

@TRICKEDTINS Месяц назад

I don't think so

@marcomantovani5425 2 месяца назад

question I have a Yamaha f9.9 fmhs 4 stroke is it possible to bring it to 15 hp? Thank you

@Gruin 2 месяца назад

I have a T9.9hp - 1994 4 Stroke, Electric Start Called a "High Thrust" The only Difference I Can Find is the Huge Size of the Propeller, looks almost out of place on the Motor? 11 3/4" Diameter X 9 1/4 Pitch R --- Right Hand

@TRICKEDTINS 2 месяца назад

I dont think so

@fonsspeelman589 Год назад

dont i need a different prop if i switch the reed?

@TRICKEDTINS Год назад

The prop is determined off of your weight displacement and size of the boat

@zombienugz4772 2 месяца назад

I have a 15hp yamaha 2 stroke 2003...could i get away with bigger reeds? Say 20hp reeds maybe?

@TRICKEDTINS 2 месяца назад

Unfortunately, not. That engine is maxed out without doing machine work

@omieyouknowme Месяц назад

Had one few years ago. Had to sell needed $. Tried to find another for lingest time a ither just fell in my lap. Gonna keep this one. My ya these motors are dirt simple The enduro models are wasted spark so both plugs fire at same.time. Keeps cost down and easier cheaper cdi unit. I love my 4 strokes and dont touch two anymore, except then 9.9/15 yamaha

@TRICKEDTINS Месяц назад

They are one of a kind

@jerryandjennie 10 месяцев назад

Can this be done with a Yamaha 4 hp 2 stroke to upgrade to a 9?

@TRICKEDTINS 10 месяцев назад

I think the 4 and the 6 are the same? Not really sure tho.

@iballlp 5 месяцев назад

4 hp is a single cylinder

@leifgramford2138 9 месяцев назад

What is the PART # on the thing that makes it a 15HP

@TRICKEDTINS 9 месяцев назад

Its called the reeds and ive already shared it in the comments

@chadreeves403 Год назад

The 60 hp 4 stroke on my 16.5 foot foot told me it feels like a 75 hp. Does that count? Lol

@MrTriple660 9 месяцев назад

I've got a 1991 yamaha 9.9 with only 110 hours done just as clean as this one

@TRICKEDTINS 9 месяцев назад

Nice

@wonjkimchi9891 5 месяцев назад

is it possible to do this to a 1969 mercury 9.8hp 2 stroke?

@TRICKEDTINS 5 месяцев назад

Hahaha i have no idea. That motor is 14 years older than me.

@wonjkimchi9891 5 месяцев назад

@@TRICKEDTINS aww man. Those Yamahas are hard to come by

@stuartdeane9618 Месяц назад

OMC all the way..

@garrettzrallack6546 3 месяца назад

Can you convert a 2018 Yamaha 15hp into a 20-25hp?

@TRICKEDTINS 3 месяца назад

2018 is 4 stroke. Maybe the ecu can be upgraded but not sure. That's why everybody is running the suzukis and tohatsu outboards...

@tonydunn3985 Месяц назад

Do you have another for sell

@TRICKEDTINS Месяц назад

Have 2 more that need work

@barawhitewaterrafting9846 11 месяцев назад

Can you upgrade a 4 stroke 9.9 to a 15?

@TRICKEDTINS 11 месяцев назад

I'm not a hundred percent sure I think you can swap the carburetors out

@barawhitewaterrafting9846 11 месяцев назад

@@TRICKEDTINS might have to order one and try. Seems like there’s not much info on it. Everyone says something different which makes it hard.

@lucaspeterssson 11 месяцев назад

i have a yamaha 9,9 hp and its fourstroke, is there any chance i can upgrade it to get 15 hp? please help

@TRICKEDTINS 11 месяцев назад

I really don't know. Sorry

@Gruin 2 месяца назад

Consider Propeller My 1994 4 stroke T9.9hp called "High Thrust" Has huge Prop. 11 3/4" Diam X 9 1/4" Pitch R - Right Hand

@rapido2963 26 дней назад

Just bend the throttle stop out of the way. As told to me by Yamaha outboard mechanic.

@aaronwalderslade Месяц назад

Can I convert my 4 stroke 9.9 to 15 hp?

@TRICKEDTINS Месяц назад

No only 2 stoke

@ReidDavies34 11 месяцев назад

Would a 20hp reed work?😅

@TRICKEDTINS 11 месяцев назад

Different engine

@ThePocketRoad 7 месяцев назад

Hi guys dose anyone know if the cabis are different

@TRICKEDTINS 7 месяцев назад

Cabis?

@ThePocketRoad 7 месяцев назад

@@TRICKEDTINS carburettors

@TRICKEDTINS 7 месяцев назад

Same

@robins9938 Год назад

Can i bend up the reeds by myself ?

@TRICKEDTINS Год назад

Yes but they need to be spot on.

@robins9938 Год назад

@@TRICKEDTINS thank you for the quick response :-) Can i take those China reedvalves from ebay or do you recommend to take the original Yamaha reedvalves?

@lttuang Год назад

@@TRICKEDTINShi, I just bent mine to have 6mm gap, as seen in another blog. Problem is the prop spins really fast once I shift into gear. What do I need to adjust? And what do you mean by “it has to be spot on”?