Yamaha Ténéré 700 | HeliBars Tour Performance Handlebar Risers Install

Просмотров 2,1 тыс.

% 21

Installing some risers that bring the handlebar closer to me. I felt the stock handlebar position was a reach for me and it made my back hurt after a while. The addition of these risers and rotating the handlebar towards me h as helped my ergonomics tremendously.
Here is a list of the equipment I use. Some items are no longer in production or I could not find so I have listed a similar item. If you have any questions about any of the items below, just ask!
Motorcycle Parts:
• HEED Bunker Bars - heedshop.eu/en_US/p/Crash-bars-for-Yamaha-TENERE-700-Bunker/504
• HEED Rear Crash Bars - heedshop.eu/en_US/p/Rear-crash-bars-for-Yamaha-TENERE-700/511
• Kriega OS-Base Yamaha T7 Combo12 - kriega.us/osadventure-packs-1/os-base-tenere700
• Perun Moto Top Luggage Rack - www.perunmoto.com/collections/yamaha-tenere-700/products/yamaha-tenere-700-top-luggage-rack
• Vortex V3 2.0 Clutch Lever - www.revzilla.com/motorcycle/vortex-v3-20-clutch-lever-yamaha-2002-2023?sku_id=1154503
• Dash Stabilizer - amzn.to/45WnMSO
• Chain Guide - amzn.to/3R3o8Ty
• Quad Lock - amzn.to/3P08LZC
• Headlight Protector - amzn.to/3Z4ZiVw
• Camel ADV Side Stand - camel-adv.com/collections/yamaha-700-tenere-t7-parts-and-accessories/products/yamaha-700-tenere-t7-camel-toe-sidestand?variant=32705742536764
• Camel ADV 1-Finger Clutch Kit - camel-adv.com/collections/yamaha-700-tenere-t7-parts-and-accessories/products/yamaha-700-tenere-t7-1-finger-clutch-kit
• OEM Center Stand - amzn.to/3ElmbdA
• OEM Lowering Link - amzn.to/3R6MsE7
• WRS Oversize Side Deflectors - www.wrsusa.com/collections/2023-yamaha-tenere-700-xtz07/products/pair-oversize-side-deflectors-wrs-yamaha-tenere-700-2019-2023
Riding Gear:
• Bell MX-9 MIPS - amzn.to/3Rb95aF
• Klim Marrakesh Jacket - amzn.to/3ZhcE13
• Oxford Utility Bright Top - www.revzilla.com/motorcycle/oxford-utility-bright-top?sku_id=10019799
• Aether Ramble Pants - www.revzilla.com/motorcycle/aether-ramble-pants
• TCX Boots - amzn.to/3YZTX1w
• REV’IT! Boxxer 2 H20 Gloves - www.revzilla.com/motorcycle/revit-boxxer-2-h2o-gloves
• Cardo Spirit HD - amzn.to/45BVFIS
• Mission Cooling Neck Gaiter - amzn.to/3PpTHpz
Bike Maintenance and Consumables:
• Motul 7100 4T 10W-40 Synthetic Oil - amzn.to/45Wov6O
• HiFloFiltro HF204RC Oil Filter - amzn.to/3ElBRO0
Creator Gear:
• Insta360 ONE RS 4K Edition - amzn.to/3Z35Jbr
• Insta360 ONE RS Microphone Adapter - amzn.to/3sIhU18
• Insta360 ONE RS Battery Base - amzn.to/481Vngf
• Insta360 ONE RS Screen Protector - amzn.to/3Pnd4Q1
• Purple Panda Microphone - amzn.to/45B1fLB
• Dead Cat - amzn.to/3PoaN7e
• Chin Mount - chinmounts.com/products/bell-mx-9-action-camera-chin-mount?gad=1&gclid=Cj0KCQjwusunBhCYARIsAFBsUP8WTIP-zJ0OvsJP-nQ2XP6FAvQUayQDk1Ng7diIFc61ZZrm_CF5xg0aAozfEALw_wcB
• Sugru Moldable Glue - amzn.to/45FuYmH
Disclaimer: I Some links are affiliated with me and if you purchase an item using them, I may receive a small commission. I am an Amazon Associate. It will not change the cost to you. I appreciate you and thank you.
#yamaha #tenere700 #motovlog

Опубликовано:

26 июн 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 6

@olliechristopher467 11 месяцев назад

Hi there Elliot, I had a chance to ride my buddies T7 with these risers installed. Made the bike feel natural with zero shoulder pain. HeliBars are a game changer. I also have their risers on my Super Tenere. Nice install and you can't go wrong with these. BTW, I had to laugh when you mentioned the bars being loose when removing them. Same thing for me when I was removing mine!! After that I was going over the whole bike making sure all the dealer installed stuff was secure.

@MotoBumT7 11 месяцев назад

These have helped me so much in terms of comfort. I know they're called "risers" but it was more about moving the bars closer to me. Although without them I will say the steering response is a bit better, I was leaning forward quite a bit to reach them which put a lot of pressure on my shoulders. Thanks for the view and the comment! Ride safe out there.

@pascalm1163 4 месяца назад

Couple of things for you to know Handle bars clamps is first the top then the bottom There is a gap, yes, but that's by design The handle bar has a dot on the right central side. This is a position marker Look for the shop manual, you'll have more details Tale care

@MotoBumT7 4 месяца назад

Thanks for the tips! I found that out after I already made the video. I have tightened the top bolts first, then the bottom.