The SK 500 is designed for repetitious straight (90°) cutting Aluminum extrusions. The SK 500 is equipped with a servo motor to drive the automatic material feeder and a PLC unit so the feeding process is fully automatic with an accuracy of +/-0.1mm. Saw blade is straight up-stroke. The operator can enter feed rate, cutting speed, cutting length, cutting height, and number of cuts via touch screen display or through the cutting list.
Modes of operation include: Cutting From List, Normal Cutting (manual entry), Single Cut
Cutting lists are prepared in Microsoft Excel (csv) and transferred to the machine with USB memory stick. Alternatively, they can be made by using the touch screen. If the cutting list function is not used, “Normal Cutting” mode allows the operator simply to enter the required length and quantity and start the process. Also single cuts are possible just like a traditional upcut saw.
The work table separates before the saw blade retracts to avoid back-cutting. SK 500 can cut from 5mm (0.2”) to 1000mm (39.4”) lengths in one stroke and no limits with step feeding. Equipped with profile detection sensor for auto shut down when job is completed or profile is finished.
Safety hood is interlocked and cannot be opened during the cutting operation.
In case of additional question, please contact us at 647-642-3646.
22 май 2024
