No video :(

You Can Build A Fuzz Face (StewMac Fuzz Face Kit)

Подписаться 476 тыс.

Просмотров 111 тыс.

50% 1

This morning, Josh is starting a new series on the JHS Show called Short Circuit, where he is going to be doing some DIY projects and working on circuits! If you're into building pedals, if you want to know how they work, if you want to learn about electronic parts, this is the show for you! Today, Josh will be working on a Fuzz Face kit from StewMac. Basically, we're sitting at home with Josh while he works.
You can get the kit here: stewmac.com/
Get parts for building pedals here: stompboxparts.com/
or here: smallbear-elec...
If you like forums, this is a great place to go and discuss and learn about DIY projects: www.diystompbo...
www.thejhsshow...
www.jhspedals....
JHS Fresh Clips: / @jhsfreshclips7880
#jhs #thejhsshow #diyguitarpedal #diy #guitarpedals #circuit

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 523

@CarolMatzPiano Год назад

Thank you Josh for the free pedal! Chose the 3-Series Fuzz, of course. Watching you solder was really helpful...I see what I've been doing wrong. Thanks!!!! Great content... more please!

@davidpekarsky2977 7 месяцев назад

I think when that tool is in use, it should be called Carol Cam.

@zachariahpoltergeist4516 5 месяцев назад

The Carol Clamp!@@davidpekarsky2977

@acdclexu6296 3 месяца назад

we actually learned in electronic school you shouldnt bend the legs underneath on the solder side because if you need to chage something its pain in the ass and the solder doesnt flow as parallel

@gregheaney Год назад

I'm only a few months into pedal building and I've never heard a more reassuring phrase than "This is the part of the build where things start disappearing." It feels like at some point your parts and tools just sprout legs and toddle off and it's nice to know it's not just me.

@GuitarSoloReactions Год назад

Love the last name, I'm Brian Heaney

@nevermind4328 Год назад

Worry not. Happens to all of us. LOL.

@pabloveloso5790 Год назад

Sometimes mine just falls into oblivion.

@C33Fernandez Год назад

Haven't gotten into pedal building, but I have assembled things before with small parts and one tip is to use small containers to categorise and keep things in. That way, when those small containers sprout lets and go walk-abouts, at least you'll have the peace of mind that the little pieces aren't alone.

@gregheaney Год назад

@@C33Fernandez Smart. The buddy system is a classic for a reason.

@producerman10030 Год назад

You’re the Bob Ross of pedal builders. "Change the transistors, it's your world"

@sunchylde Год назад

😄👍

@timwatson4118 Год назад

Look at all the happy little components!

@robcerasuolo9207 2 месяца назад

Bob Ross of fuzz... who made a video about the Ross Fuzz... which made my head bob along to that song he played... coincidence?

@chilidogcowboy Год назад

Dude-thanks for teaching people how to catch their own fish.

@jhspedals Год назад

Any time!

@krisbradford8963 Год назад

As someone who's just started building kits I love this

@almendratlilkouatl Год назад

Yeah, I hate it too

@xb5883 Год назад

As someone who has built kits I love this

@DrJeebles Год назад

I had to walk away from the live stream for a few minutes so it didn't let me vote on the poll. My answer is YES. Please keep doing this series.

@adrianmiller1971 Год назад

Love the 80's opening, solid!

@themattlewisexperience Год назад

The theme song and logo is outstanding!

@stoatystoat174 Год назад

Equipment suggestion: You could use an Ipad (or non apple equivalent) to take a photo of the small component in front of you so you would instanly have a 10" picture of it you could point at various parts with human sized fingers. You could then just put the ipad out of shot and come back to it later if you think of another point or have another tiny component. Or a dedicated Tiny Objects camera with a Tiny Table and Wee Pointy Stick

@seangarland Год назад

Using a multimeter to test the resistors is essential for those of us with red/green colorblindness. It can be really difficult to discern the different colors of the bands.

@gerrykavanagh Год назад

I have a little fixture made for this exact purpose. It's basically a bit of PCB with 2 copper lands with banana plug leads soldered to them so as I go I can just touch a resistor off the pads, get a reading and carry on. Much handier than dealing with probes.

@zachariahpoltergeist4516 5 месяцев назад

Good Lord this! They print tiny little numbers on other components, why can't they just put numbers on resistors?

@rhymeswfamous Год назад

Just in time, I'm meeting a builder tomorrow to do my first build , a fuzz face circuit from scratch. This video is the perfect prep!

@sparksnguitarsmike Год назад

I've built 3 Stew Mac kits and have 3 more to build. Absolutely a blast to build. Thank you for this video.

@matthewh6119 Год назад

Josh is truly a gift to humanity! His desire to share his passions and his humble nature make it easy and enjoyable to watch. Guess that makes me a nerd! 🤓

@TribalScience Год назад

I build electronics professionally, but I've only made one pedal from a kit. This is super cool!

@mattwesthaver6909 Год назад

I've been breadboarding fuzzes all week so this is just lovely! I'd love to know more about substituting components, and identifying the different stages of a schematic! Thanks for the tone wisdom

@joshuahek4564 Год назад

You are the Bob Ross of pedal building. Today we're gonna build a happy little fuzz...

@mrstrypes Год назад

Wow! This is SO helpful! Even after having built around 25 pedals, I still learned things watching Josh! More, please!

@JulianHolmSteensen Год назад

Cannot wait for the breadboard episode! Thats where I'm stuck, somewhere between schematic and breadboarding. Also, talking to one self while creating is essential! Thanks, Josh! 👾

@JimmyHagerstrom Год назад

Hi Julian! You aren´t from Sweden huh? The surname Holm is very common here in Sweden anyway... Would you like to tell more precise where you are stuck, with what? Is the breadboarding where it takes stop for you? When you are trying to take a schematic and put a circuit on the breadboard? Is it something specific that you have been trying to do but haven´t been able to overcome? Some circuit you cant get working? I wouldn´t mind to try to help you overcome the obstacles so you can keep on advancing to your next level with electronics. Getting stuck is so un-fun and bad for creativity so i would be glad to help you with your journey. I´m no electrical engineer but i have made the journey myself with building kits - building from stripboard/vero layouts - building from schematics - making my own schematics and circuits - designing and making my own PCB´s for pedals/synthesizer circuits. I feel like this hobby is the best thing thats ever happen to me, it has been so extremely fun. Everything about it. To learn, create, advance, trying, failing, troubleshooting, getting ideas on the bus i have to draw a sketch of immidiately and try as soon as i come home. It is so rewarding and healthy for the mind and soul. Challenging and interesting. Electronics is not easy. You WILL get stuck. What i like about it though is that you physically can track down and find the faults. It doesn´t give you a error-code like a computer "FaultErrorUpdate404.exe is computing process corruption, bios delete C:. Erase the Cat. Press Try Again!. If you get how i mean. If you have a short circuit for example, there will be a physical short somewhere on the 10x10cm board that you will be able to find, sooner or later. In the beginning there is a lot of headscratching when troubleshooting but the more you do it the better will you be at troubleshooting. You will be a lot faster and it will be a lot easier when you have methodical ways and a better overall understanding of circuits so you know where to look when a certain fault is showing its ugly face. As a beginner you have to just be persistent sometimes, find A way. Maybe not the best or fastest way but atleast you now have a way that you know will work for sure, get you to your goal. It´s a lot easier if you have someone to bounce your ideas off of and talk to when getting stuck, we learn a lot by putting word to our thoughts. So if you want someone to talk electronics with back and forth and maybe share our current projects and learn from each other you´re more than welcome to send me a e-mail or text me att fb or something. You can find my mailaddress and my name here on my youtube page. I´m curious where you are stuck :-). If anyone else reads this and wants to talk electronics, feel free to reach out!

@matthewdenny6505 Год назад

Firstly, I love this content so I'm glad you're doing this. Secondly those instructions from Stu Mac are so visually easy to read, use and are super informative. Congratulations to their team for that.

@RobUttley Год назад

Could be my favourite video thus far - I've been watching a couple of years now, it's definitely a favourite anyway. More please Josh, this was fascinating and really encouraging.

@flatgroundtv7097 Год назад

This is the best reality show that I've ever watched. Organic & Natural. That is a good band name too. Your wife and Belle play a huge role in this episode. At last, we believe that you're a human.

@jacob_miller Год назад

Josh, i LOVE this concept! Real content warts and all, honesty & sincerity are wonderful traits 🙏

@dannyphantom907 10 месяцев назад

Josh you have literally impacted my life today, I watched from beginning to end. Yes, I took a 3 hour nap with my wife halfway through because it really is ASMR. But I finished it and I was SO EXCITED to hear how quickly you could change the sound of the fuzz, and once I saw you go through the bin of capacitors and continium transfunctioners I lost my marbles. I knew I was going down a beautiful, colorful, spiky, rabbit hole filled with unsoldered resistors and transistors and insistors and desistors and prosisters covered in germanium gelatin. I have a small shopping cart on amazon with a work mat, a soldering iron (a decent one) and some solder and remover wick. I just wanna find a cool pedal and build my first one. It also got me curious about modifying my pickups, and then I saw a video of another guy making a pedal with 12 oscillating capacitors on it to help change the tone of the guitar pickups. Alice, I will find you in Pedal Wonderland!!!!

@tone1798 Год назад

Please keep this series going! I learned so much!!! Thank you Josh you are the GOAT!

@mcam5087 Год назад

Came for the Barney songs, stayed for the pedal build. This was beautiful therapy I didn't know I needed. Thank You Josh. 🥰🥰

@OTR366 Год назад

Spectacular episode Josh!! I really enjoy this NERD-RAMA format of your shows. Looking forward to many more to come. Thanks!!!

@bldallas 9 месяцев назад

Just stumbled into this video; not sure how I missed it when it was first posted, but IT’S FASCINATING! I’m a civil engineer, so I’d say I’m fairly intuitive and mechanical, but electronics have always intimidated me. When I initially saw the parts for this build, I thought, yep, no way I could do that. But Josh has such an awesome way of explaining everything, and then to be able to actually watch him doing it, is just so cool! Now I want to build a pedal! Seriously. On a related note, I have the Notaklon solderless pedal on pre-order and was a bit concerned about whether I could put it together. Not anymore. Thanks Josh, you are an awesome teacher!

@LeeMurrman Год назад

Ive been building for years and already see 5 things Im going to change in my process. Im gonna love this series.

@kgrant67 Год назад

I bought this kit a couple of months ago and it's been sitting on my dresser because I've been a little intimidated to jump into it. So excited to build this along with you

@cebassplyr Год назад

I absolutely loved this episode!! Not only was it great to watch you build a pedal but it was really great to see you work through any of the minor hiccups you ran into and watch you troubleshoot them. Thank you soooo much!! Can't wait to see the next episode!!!

@mccmandrake Год назад

Please make a thousand of these ones!!! I loved it and learned so much!!!

@stringbladestudios Год назад

Josh thanks for doing this. It is important to show both being careful to follow directions but you also had the chance to demo troubleshooting.

@PiPArtemis Год назад

This couldn't be more perfectly timed I recently ordered a book on electronic circuitry so I could start learning how to modify or even build pedals thanks to the inspiration you, this channel, and your amazing team have given me

@thankyoumisterspell Год назад

What book did you order? Would love to dig in as well

@allenscarborough3484 Год назад

Thanks, Josh!!! I had already built the same pedal. Wish I'd put in the transistor adaptors as you did to play around. Loved it!

@millardbrown4769 10 месяцев назад

Watching Josh nerd out building a pedal - that's entertainment!! Thanks!

@AndrewWukusick Год назад

Nothing you've ever done has got me more excited than when you announced doing this. I absolutely love this kind of content and I can't wait to see more. I'm a beginner guitar pedal builder with a few pedals built so far and many more in the works.

@terryeaster1 Год назад

I am so freaking into this! I'm a flight simulator technician, I've worked on several military platforms and worked at the FAA's flight standards research and development platform where I was the lead tech. I've wanted to learn to build pedals forever. Thank you so very much for doing this. I hope you'll get way deep in the weeds on how to build great pedals. Edit: spelling

@kmasek77 9 месяцев назад

This was awesome. Thank You. For such a long time I have been going back and forth (contemplating) on trying my hand at kit pedals or kit amps. I really hope this becomes a series and goes into deep dives on component selection, easy modifications for swapping components, etc. Thank you for the content!

@skatertrev7 Год назад

Thanks for your humility! It's honestly great seeing you do this in real time and make a mistake. Very relatable and validating for me as I create plenty of mistakes too

@okayestguitar66 Год назад

It's funny... I was hearing him read off the color codes for the resistors and saying to myself "that's not right, doesn't make any sense." Then I realized he was reading them backwards! 😂

@d.ryonwilhelm9001 Год назад

Please continue this series! Looking forward to the breadboard show

@touchthesun2448 8 месяцев назад

I built drones for years, It's fun until $500 gets stuck in a tree. I sold them and bought a couple of cheap guitars, which I instantly modified and upgraded. My first build was a TUBE preamp for my board. It was fun, so now after 3 years, none of my guitars or pedals have gotten stuck in a tree. They don't fly away forever, and I don't have to go to a park to play my guitar. This is like a slice of heaven... Thanks for this Josh. I can't wait to get my NOTAKLON, so I'm going to order this fuzz and build it.

@nelsonw2096 Год назад

This is great. I don't usually watch videos this long and it took a couple of sessions, but this is great. I hope you keep doing this Josh!

@offdutyjie Год назад

THANK YOU SOOOO MUCH FOR DOING THIS JOSH! I HAVE, DREAMED, FOR A LONG TIME, ABOUT TRYING THIS BUT NEVER HAD THE GUTS TO TRY THIS.... BUT MAN, Your video goes me so much HOPE! When I finally get money again, I may go at this and get the same small Kit and wire it along with your video!! I really want to see the breadboard on the kit!!!!!!!!!!

@TommySprocket Год назад

I just got to tell you how much I appreciate you taking the time (as busy as you must be running your company) to educate the masses about this interesting and very rewarding hobby. You my friend are a true believer and King of pedal lore!

@Mdefelice 4 месяца назад

Just recently finished building you-Tuber tonegeek ts10 pedal build… and I am hooked. Josh great information, please continue this series!!

@UncleYeti Год назад

Oh yes! Thanks man, I bought a fuzz face clone kit for Christmas and not even taken it out of the bag yet due to time constraints. Now I'm inspired again

@aschilds Год назад

I really appreciate you making this video, Josh. As someone interested in learning how to create my own DIY pedals this has been a great resource. It helps a lot to see how different people approach their workflow and this makes the idea of creating my own pedals much less intimidating. I hope you will consider making more of these kinds of videos, I really learned a lot and enjoyed it. It's incredibly helpful to see a tutorial from an industry professional such as yourself.

@wodenmotorcycles9635 8 месяцев назад

Top job Josh. That's real life right there, own your mistakes and see it through to the end. Looking forward to the breadboard as I inherited a bag of fuzz face components in a box of bits that came with a fender body that I used to build a strat. There was also a 80's OD1 in bits that I managed to put together. Keep up the great work! Happily own an Angry-Driver pedal 👌 Cheers Adam

@ousley421 Год назад

I had Mac Stew for lunch, thanks Josh

@bradboll Год назад

Definitely keep this series going!! Really looking forward to the breadboarding video of this circuit!!

@brianruiz1644 Год назад

Very cool! Thanks so much for having us along!

@Mike_S_Swift Год назад

I coached my nephew through the build of the Ghost drive several months ago and came out great and he wanted me to coach him on the fuzz face about a month ago. Went for the smoke test and nothing on the pedal but we did get tone thru on bypass. Had a big voltage drop right off the get go using my dvm. He was discouraged and i proceeded to unsolder the power connector so I could remove the guts from the enclosure. I touched up a few solder connections before doing that to no avail. Upon close inspection I could see the tone pot was touching one side of the diode and the solder connection was pretty high so cut that down and told him to put another piece of the insulation tape in the small area where there was none. Temporarily hooked up the power jack and tested outside the case. Worked so reassembled and did the listen to bias but don’t know much about that. I liked your using the transistor bases so you can try different ones. I bought a couple for when I do my fuzz face. I’m also going to top mount the two trim pots and put a small voltage gauge in between for the bias so I can always go back to a certain setting. Great video I skipped past the build part to where you started testing. I’m going to be looking for the bread board fuzz build. Cheers!!!

@johnwelsh3739 Год назад

Man, you have to love Josh. Common to evil geniuses and pedal designer/builder savants alike, little attention is paid to pesky details and minutiae. He said he is missing parts, meanwhile there are parts all over his desk into which these "missing parts" could disappear. And I'll bet there are more than a few "missing parts" in that garbage can between his legs under his desk. He's like the heralded life-saving perfectionist surgeon that accidentally sews his surgical glove to the new heart he's just transplanted.

@simonpfleghar2919 Год назад

I build my first pedal this year in march. I ordered a kit for a Fuzz Face clone and a DS-1. I didn't expect much, i never soldered something since university 15 years ago. I f****ed pretty much, but with a little reaserch i found my errors and fixed them. Now i'm totally hocked. Finished my 8th pedal today (ElectricDruid DigiDelay). Give it a try, it is a lot of fun.

@petersage5157 2 месяца назад

"Failure is not an option, it's essential." - Adam Savage. Recovering from a mistake is an essential skill in the making process. "Wiring is the boring part of building a pedal. It's not glamorous. Nobody's gonna applaud you." I've seen some wire looming so beautiful and tidy it made me weep; I've seen some messy wiring that's made me cry. It's this attention to detail in assembly that marks the difference between a mass-produced CBS product and something hand-built by Howard Dumble or Ken Fischer. Dave Jones of EEVblog and Big Clive have done some great videos on hand soldering, both though hole and SMT. Those anti-rotation tabs on panel mount pots are brilliant, and with modern CNC milling capabilities, I think it's inexcusable not to have holes for them in the enclosure. It's just one bit change in the milling process, and if a face nut comes loose, not having those tabs introduces more potential points of failure.

@christopherstorz6184 Год назад

I'm most amazed by the fact that he still has his 10mm socket. Fun fact: as soon as you open and use a socket set there is a 90% chance that, when you put it away, a wormhole will open up and consume the 10mm and 9/16 sockets. They are whisked away to a pocket socket dimension where they spend all of eternity watching video of their previous enslavers searching for them.

@zachariahpoltergeist4516 5 месяцев назад

This dimension also contains all the single socks that disappear in the wash.

@orwellophile 4 месяца назад

I think they run off with your PZ-2 bits, and from time to time have an affair with that 1 particular Torx bit you need right now...

@jasonmayse5585 Год назад

I hope more content like this keeps coming JHS awesome job

@simonkormendy849 7 месяцев назад

Hey Josh, I've been into diy electronics since I was 13 years old, I'm 54 years old now, and have quite a bit of experience in building diy fx pedals, one pedal I built is a custom UniVibe pedal which includes an added 3-position voicing switch and an external speed-controller socket, as well as led status indicators for the bypass and Chorus/Vibrato footswitches, I also have a red Jim Dunlop JD-F2 Fuzz Face that has a genuine Jim Dunlop JH-F1 Turquoise Jimi Hendrix Fuzz Face PCB installed in it, sounds great.

@monsterbonsai9173 Год назад

Trying to learn bass, but got hooked on building pedals... and I totally agree it is therapy!

@mudgutzadventures436 Год назад

I talk to myself constantly when I'm doing something. Fixing the car, cleaning the BBQ, building a kit RC car, anything where I'm concentrating on what I'm doing. I find it actually relaxes me and by basically talking out what I'm doing keeps me focused and less stressed

@brokedownsuperman 3 месяца назад

So glad I found this, and Josh always talks up other people in his industry. I’ll be checking Wampler next.

@michaelherleman8200 Год назад

Enjoyed your process. Thanks for showing how to make a mistake, and recover from it. Everybody had an opinion and a solution, and no idea what was really going on.

@IamMusicNerd Год назад

That Midnight 30 Over Fuzz you demoed a few days ago might be the only Fuzz I ever use for the rest of my life :)

@VesselForHonor 6 месяцев назад

THIS IS SO AWESOME i can't wait to learn more. How the different transistors made such a huge difference was so cool, I am impressed. I was looking for this kind of introduction to building pedals, so neat

@mctweddle Год назад

I'm doing a few workshops on pedal building at my school. One of the options is a modded silicon fuzz face with the fuzz control replaced with a fixed resistor and a bias knob. We are using biscuit and chocolate tins as the enclosures. No circuit boards, just twisting components together, soldering, and praying.

@pascalhoberg6513 Год назад

Kudos to you and Brian, Josh! Knowledge dissemination is what it's all about. 👊

@hisproperty1438 Год назад

G'day Josh, I'm enjoying your "How To" video. I'm about ½ way through so far, but I had to write you a note. You've just encouraged us to write, so here's some tips I have to share (although, I feel really silly telling you this). I made a couple of volume boxes & A/B switches where I made some mistakes. So I ended up making some new leads for my multimeter to help find the problems. I bought a few 6.35mm TS jacks, a bunch of ¼" banana plugs, some 2-core wire, & made up a few test leads to connect my DMM to the boxes. Here's what I made; 1- Single jack to 2 banana plugs. I wired up the tip to a red plug, & the sleeve to a black plug. When I use this lead in the box, select the Continuity Test, & test is negative, then the earth & positive are not connected. I can also use this lead to test pickups in guitars. 2- Single jack to single plug (4 off). I wired up the tip of 2 jacks to 2 red plugs, & the sleeves of 2 more jacks to 2 black plugs(single wires can be used). When I run a continuity test, 2 black plugs should test positive, & 2 red plugs should test positive on a by-pass circuit. 3- Finally, I've connected solid core wires to 2 banana plugs. The solid core wire should be sized to fit breadboard sockets. I can then use these to test my breadboard circuits for voltage, resistance, or continuity. I hope this helps someone out here in JHS-land. Once again, I am enjoying your video. Thanks for the great program. Please please please do not stop making them. I tell you what - if you promise to keep making these videos, I promise that I will not start my own pedal company to put you out of business. Or, in other words, I promise to use what I'll learn for niceness, instead of evil. Keep up the good work Andrew BTW, your desk is a mess, which is good to see. :)

@Kameratzas Год назад

I got my jack wiring upside down on a pedal build recently. I didn’t stay calm… looked at the circuit multiple times over the next few days trying to find a bad solder joint. The relief when I finally worked it out!

@kennethmillemon3006 Год назад

Thank you for doing this video! I hope this series continues.

@justinb2924 Год назад

Josh I definitely loved this episode. Definitely keep on with this.

@gregjeanfreau8027 Год назад

Please please please do more of these!

@jwelliott74 7 месяцев назад

1: thanks for the tip on the Rocket Sockets - I use those for everything pedal and guitar wiring-related. 2: I’d love to see a workbench series exploring mods to pedals which are easily mod-able. I tried building a Klon replica, and made a lot of mistakes (don’t work tired, kids). I’m still unraveling them while I gather parts for a second round, but I see a number of things I need to do differently. Thanks for all your content, Josh!

@AndrewAlex92 7 месяцев назад

To me there are few things as reassuring as seeing someone with decades of experience still making the same mistakes a person with hours of experience makes. The beginner mindset is a powerful thing. Thank you for this format, and can't wait to follow along on more.

@orwellophile 4 месяца назад

They're totally different mistakes that experts who don't need read the instructions make. Totally unrelated to the mistakes made by beginners who are simply too foolish to read the instructions. They just look very similar, ... if you're not an expert. For instance, all experts ignore the recommended order to install components. How can a piece of paper know more than we do?

@collinoverbaugh5870 Год назад

What a coincidence, I just recently bought a fuzz face clone kit off Etsy. Its gonna be my first build! It's nice to hear an industry professional talk more candidly about pedals/circuits/electronics. This can be a very overwhelming and daunting hobby to begin learning about but thanks for helping to clear up some of my stress and confusion! Excited to see more from this series.

@TheSuperspyk Год назад

Loved everything about this right down to the name of the series! Please do more!

@theseaward4613 Год назад

i started building pedals because guys like You, Wampler, and fuzzlord made it seem so accessible. Like, some geniuses do this, but you don't need to be a genius, just get in there and start!

@wakelyb81 Год назад

I was definitely falling asleep. It was like when I watched Bob Ross as a kid after school. But now its after work and staying up for 36 hours. I really enjoy the content.

@KoaCharvel Год назад

Love this new series, please keep doing them!!!!!

@anthonylv64 11 месяцев назад

Thanks a lot for your teachings❤ I tried to build a pedal,20 years ago, but I was impatient, and didn’t follow the instructions, and I failed; Now that I’m hitting almost 60, I got plenty of free time, and I’ll try again! 😂😂😂😂😂

@johnnymiller5712 Год назад

You Can Build A Fuzz Face (StewMac Fuzz Face Kit)

Опубликовано:

Поделиться:

Ссылка:

Скачать:

Добавить в: