You NEED To CHANGE THIS In Season 16 (Apex Legends) 

No lower for fine aim and then use alcs I use 2-2 fine aim and then my alcs it’s aimbot the sense converts over to alc and alc per optics convert over to regular sense try it out go to alcs and put everything to a 10.0 then turn them off with the per optics with your regular senses you’ll see what I’m saying

​@@kellantothemax35wait what can u please explain a little more i am having a hard time understanding your comment bruh sorry 😔

@@kellantothemax35 stop giving away the sauce please 😂

@@Tyronebigggums i don’t think he knows what he’s talking about. You can’t do both ALCs and preset sensitivities at the same time.

@@Smiley957 he’s saying that alc per optics affect the default sensitivities, even if you aren’t using alc settings

Like the fact aim assist is so strong it messes up literally any sens. I wish aim assist was just lightly nerfed for everyone on controller

That slow down might be if your using the extra pitch and extra yaw settings, those add to your total sense when the analog stick is pushed to the outer threshold, but what they don’t tell you is that aim assist turns off that extra sense, and that can feel really bad if your base sense is too low. I run outer threshold - 1%, response curve - 6, yaw - 200, pitch - 160, extra yaw - 200, extra pitch - 160, ads yaw - 100, ads pitch - 80, ads extra yaw 50, ads extra pitch 40, and zero ramp up or delay, and deadzone should be as low as possible without getting drift. That’s basically a modified 4/3 that’s in between classic and linear. You could try something like that, or even switch the extra pitch and yaw values to zero if those throw you off.

Yeah unless you just get shat on by people smurfing and destroyed by like 6 people at the same time. Can’t believe they removed arena I hated that so much. It was so much easier to train your sim in arena matches much more fair 3v3 rather than 6v6 constant respawns

@@blakehughes661 skill issue

@@blakehughes661 skill issue forsureee

What sens do you play on steady

What are the alc for linear

@@alexanderfiehrer9447 response curve 0

Linear 4.3 ALC are yaw 220 pitch 180 ex yaw 220 ex pitch 100. I changed the ads values a bit. I got ads yaw 125 ads pitch 125 ads ex yaw 140 ads ex pitch 80. These settings slap.

Great input. Would you mind sharing your settings to try them out?

@Kmasse8 Sure Deadzone 2 Outer Threshold 1 Response Curve 2 Yaw 200 Pitch 140 Turning extra yaw 130 Turning extra pitch 60 Turning rampup time/delay 0 ADS Yaw 132 ADS Pitch 114 ADS Turning extra yaw/pitch 0 ADS Turning rampup time/delay 0 Per Optic ADS: 1x/iron sights 1.2 2x 1.4 3x 1.4 4x 1.4 6x 1.6 8x 1.6 10x 1.6 A range of response curves feel good to me on these sensitivities. Anything from 2-6 is good, but I've found that I have better movement with 2, so that's what I run. It really depends on your playstyle, though. If you're aggressive and get up in people faces a lot, then a lower response curve is better. If you tend to take fights a little slower and need more stability for ranged engagements, then I would recommend a higher response curve of 4-6.

Steady isnt even close to be like linear lol😂😂

That and I run 5-3 its odd but great for range!

verhulst plays on linear btw

Yeah it takes a long time to master linear and even then you can play inconsistent sometimes at least for me I've had genburtens settings nearly 2 years and I have finally got better then what I was when I was on classic or the default linear which is easier then gens settings

@@AEONIC_MUSIC don’t you have a lot of stick drift using gens sens?

@Itzzwrat not too bad I think you have to learn how to place your thumb to minimise it and also a decent controller

what helped me was giving it just little tiny response curve. so you have a little bit of acceleration on the small adjustments but still the feeling of linear

@@KeksKube can you explain this to me? would I have to change some alcs, and if i do would u mind giving me yours

@@LACshawn yeah alcs. Zero deadzone, no outer threshold but response curve I have on 3. I startet with 1 and couldn't really notice a difference to 0. With 2 I could notice a little acceleration but was still struggling on longer ranges. And 4 was already to much for me personally, didn't feel natural anymore so I kept it on 3.

Trying

What is it?

Bump up your dead zone from 0 up until there is no drift. For me that dead zone is 5 (with 4 there is drift).

its just green dude

Yea I’m a 4-3 classic user it just feels nice and I have good control close range with it

They do have a visual graph. Sarcasm?

4:30 😭😭 ur intrusive thoughts are hilarious

6:11 stop it! stop ur mum! Bro ur actually funny

Try small deadzone, its better on both medium-close and long rage

Linear will always be king in that regard it's all your input no game placing any restrictions on you unless you apply deadzone

@@Ninthtry9103 thanks

oh really i won ?

💯

Thats because they play on PC with higher frames per second. The game is much more fluid and a 4-3 classic no dead zone feels smoother. I'm guessing your on console?

@@rcbucs25 I get what you’re trying to say, but aim assist is still stronger overall on console. You think console players don’t get beamed too? lol

@@yahshua4928 I am a console player on ps5 and also use Alcs because I dont like default settings b/c it feels clunky. I was just reffering to your statement as to why so many people can play on normal classic settings because alot of those people are on pc (especially the youtubers we watch) classic feels better on pc

@@rcbucs25 ohh my bad gotcha