A fast and precise way to zero almost any workpiece without expensive equipment like edge finders or touch probes. All you need is a cheap strip of aluminum tape... www.estlcam.com
Hey Christian - great video. Have been following a lot of Estlcam discussion on the MPCNC forums. Can you tell me what boards Estlcam supports or is optimized for? Thanks!
hi, how you move the motor to the corner or zero postions with all axis moving simultaneously at 2:06? I thought it should be automatic after you press "ok" on the "Touch off edges" menue, but when i tried, i did not achieved that result. plz help
Hallo Cristian, tolles Video... welches Klebeband benutzt du? Habe mir welches aus dem Bauhaus gekauft und danach festgestellt, dass dieses Alu nicht leitend ist, toller Misst.... Gruß, Klaus
Have you considered porting your code to Linux, or releasing the source so that a Linux version could be created by the community? I would love to use these advanced controller features but I run a Linux shop and while it seems to work well enough in Wine for gcode creation, the com port control doesn't seem to work and I don't like relying on a translation layer. Thanks for all your efforts with this software!
Hi, im having problem with the measurement output from estlcam to my mpcnc. I inserted a 50mmx50mm box to estlcam from autocad dxf file, eastcam software shows it as 50mmx50mm box but when i feed the gcode to my mpcnc the result is larger by 14mm. The ouput box is 64mmx64mm. Hope you can help me with this.
Hi, Estlcam uses an Arduino UNO or Nano as motion controller. The alligator clip is connected to the probe input (pin digital 6 if the "Estlcam" pin layout is used or pin analog 5 if a "GRBL" compatible layout is selected). The tool is connected to GND. More info: www.estlcam.com
thank you, so, as I am using a Arduino Mega and a Marlin as a firmware of my cnc, I am not able to make this? Thanks again, you do a nice job with that software
Estlcam requires its own firmware. It also offers an experimental Arduino Mega2560 / Ramps1.4 compatible pin layout - but I'm not sure if this will work with your machine. The probe input pin for this layout would be Aux4 / Pin17.
is there an english documentation or something about that on your website? I am a bit confused with mixed english/deutsch here... I am using a mostly printed cnc by vicious1.com where I found that its possible to use estlcam, so I this way I found you... but I am very new to cnc machining, I come from 3D printing industry :) sorry for dumb questions and thanks for reply :)
Hey Houba i suggest you downloading estlcam from the website and check it out.everything is good explained. If you have any questions about cnc you can contact me. I made one on my own a half year ago :-)
Gutes Video, nur schade das es nicht auf deutsch ist.Mir ist ja klar das es so von mehr Leuten gesehen wird aber die Generation die dem englischen nicht so selbstverständlich mächtig ist haben leider das Nachsehen. Das Estlcam auf deutsch ist, war mit ein entscheidender Grund es zu kaufen aber wenn es jetzt die Anleitungen und Tips nur noch auf englisch gibt fände ich das schade.
Hallo, bei den Videos muss ich mich leider auf Englisch konzentrieren, da es einfach zu zeitaufwändig ist alles in 2 Sprachen zu produzieren. Fragen beantworte ich allerdings gerne auch in Deutsch und die Hilfetexte im Programm sind immer in beiden Sprachen auf dem aktuellsten Stand.
Ich halte das für eine schlechte Entschuldigung, seine Generation dafür vorzuhalten, des Englischs nicht mächtig zu sein. Heutzutage gibt es m.E. generell keine Entschuldigung mehr für Nicht-Wissen. Jeder kann alles lernen, dafür gibt es Apps, Onlinekurse, Englischsprachigen Content an jeder Ecke. Wenn man sich damit nicht auseinandersetzt verpasst man viele schöne Aspekte des Lebens ;-) Ich hab mir Englisch auch jahrelang quasi im Selbststudium beigebracht. Jeder kann das! Und aus sicht eines Content-Producers: Mit Deutsch erreicht man eben nur sein eigenes Land, mit Englisch die ganze Welt.
Scho wieda oina, der auf RU-vid sinnlose Kommentare raushaut. Wie stellst du dir das vor? Soll er sich mit seiner Software ausschließlich auf den deutschen Markt beschränken oder wie? 🤦