Hello, wondering if you can help with a recommendation. I have a blackjack 42, have modified it, enjoyed it. But looking for something faster, better quality, and have been looking at Tfl boats. Seems like there are lots of model/variations. What has been your favorite one? Thanks
Thats amazing! Hard to believe it can go that fast without flying away 🤣 mine flips sometimes and im still running the stock props but maybe i just need ti make more adjustments. Do you have any prop recommendations? Id like to see around 85 mph but have no knowledge about prop sizes or what id need to get it around that speed.
Dear Sir, will CNHL 70C G+ 6S 6000mAh (48x69x170mm) fit into the Zonda, or am I better off with the 5000’s? (60x51x146mm). The weight difference is 886 vs 1075g.
Excellent work. It's a shame you have to run 3 gps units to get ppl to believe what you're doing is real. Running those speeds is your reality, not theirs. Keep killing it with these boats they run excellent!
Dear Sir, do you know if CNHL 6S 70C 5000mAh G+ LiPo packs will fit into the Zonda? They measure 60x51x146mm. Thanks for any advice. Sincerely, Chris Curry.
Probably the turnigy graphene panther 75c 5000mah fit and they are similar size, the HRB 6s 6000mah also fit so do all the other brands I tried so far.
Dear Sir, how sturdy is your Zonda, compared to the carbon version? Your boat seems to be pretty damn tough. Also, I haven’t seen the new versions with bigger esc’s, 4082 motors, and carbon hulls out run your rig. The one you have is possibly the best bang for the buck.
It depends on which version. carbon with no inlay might be weaker then the fiber version with kevlar inlay, now a carbon version with carbon or kevlar inlay should be stronger. yes in my opinion it is the best bang for the buck.
@@secretsquirrel1942 I finally ordered one like yours from Banggood, for $682.38 with shipping today. But it is on backorder until 8/15. I have a cool set of Doctorprops 4513 high efficiency CNC 3D Stainless props for general running. They are very stable on my Geico 36. Looking forward to the future project.
Dear Sir, As Banggood was back ordered, I finally ended up with the carbon Zonda from OSE with the 3674 2075KV motors and the new style switchless 180ESC’s. 6.0 connectors are standard. Can you please tell me your thoughts on the larger 4092 2140KV motors? Obviously you know what works.
I know you probably won’t say but what batteries do you run? No I’m no stealing your shit, I don’t even have a boat that’ll run over 80, don’t care too but I love knowledge and learning new shit
I run 65 and 75c and can't tell the difference between the two and they are better then most so called 100+c batteries. Usually 5000 sometimes 6000mah.
Dude you keep knocking it out of the park! Great job! Love your content! I still have that MG36 I want to send you. Let me know where to send it so you can “Send It”!!!
Well done again as always you know your stuff and run beautiful on the water,keep up the good work and maybe Tfl should be looking into you to promote there boats for free.nice vid keep it up.ur friend