ZOSKAY 35kg 270 degree servo - review, install, test 

Thank you! Since this video, I have tried the same servo on with my Futaba gear. With it, I can set the endpoint past 100%, and it does provide even further angle that way at least.

If I'm understanding. You would want the 180° and not the 270° . I have both but It is one that went bad. The only way to tell the difference is the 3 colors of the wire. Other then that they look exactly the same.. .but you kinda lost me about the pwn. It digital so it should be ok

Awesome! Glad to hear it. They have been really good for me.

Great! I have been very happy with it also. It is STRONG!

Great! Glad it came across in the video.

Thanks for the support. It is hard to catch everyone's videos - we are all lucky to have such a large hobby community.

Glad to help! It has done really well for me!

Sure seemed like it was better! I will be interested to see the longevity, but looks good so far!

Thank you! It seems like a really nice one.

@@RoadsideRC Hooah brother

Hope you like it!

Thank you!

Hope you like it - they have done well for me!

@@RoadsideRC :)

Glad to hear it. There is also a new "pro" model that is even better, and is only a few dollars more.

Awesome! Glad to hear it!

Void X RC how are you getting on with the servo?

@@dangavin It's still going great! I've not had any problems with it.

Thanks for the feedback!

Just ordered one for my everest gen 7 pro

Glad it was helpful! I tried to figure out ways to show the power difference.

I use the 35kg you gotta watch getting wheels pinned between two immovable objects it will break something or strip the horn before giving up. its fun though when you steer in a bunch of big flat rocks it will throw them around

Thank you!

Thank you.

Awesome! I have been very happy with it.

Good choice!

Seems like it is! Good price also!

I think my wife/kids got me some metal links for Christmas...although to be honest, much better to break a cheap plastic link than a metal one. We crawl HARD :)

You are right! Those certainly have an influence. Since this video, I have tried this servo with one of my Futaba radios. It does give it more swing, but still not the full 270*

Thanks! I found another controller (Futaba) that allowed it to go much further.

Nice! Hope you like it!

Thanks! Yes, the seller reached out and asked for it. I thought that was kind of cool!

Exactly! These are really good, especially for the price!

Great! Hope you like that power!

@@RoadsideRC love it i can put my foot on the front and it still goes

I think or maybe your transmitter goes only a bit more than 100% Try using a programmable radio and program it to increase the end points

Great point! I hadn't thought of how some controllers go past 100%. It always is outside of my Engineer mind to think past 100! :)

Roadside RC I don’t know why all controllers don’t have max end points and then you can dial them down. Some things are a bit strange. Thanks for the vid I am thinking about modifying the servo on my vkar bison.

@@officialflippers6944 Agree. I would certainly recommend this one based on my experience.

Roadside RC thank you

Yes! Used it for a long time without issues. Been putting this servo in my other vehicles ever since.

Straight off of the receiver!

Yes!

I would suggest you try this 35kg. Link is in the description!

What chassis are you putting it in? I expect it should work great.

@@RoadsideRC I'm putting it in the 2020 Kyosho Mercedes AMG GT3, the new MK2 chassis. 😁 I'm doing 2 builds as I have time on my channel, one Drift and one Speed...

Gotcha. Steering speed is not very important with an AWD drift car. The steering doesn't do a lot for control of the car.

You are right again! That would have worked. Honestly - I did mess with some metal bars I had around to see if I could rig something up...but didn't get it to work. Still, I really enjoy this servo and run it in most of my trucks.

They asked of they could use it!

I'm sorry, I have never used it with arduino.

@@RoadsideRC thank you anyway

Yes - the TRX6 uses a standard servo dimension.

@@RoadsideRC thanks! I heard that traxxas servos kinda suck lol

I am sorry, but I have never used an arduino for programming.

As far as "should you be able to use any digital servo" yes, as long as you're sending the correct signal which I believe is just PWM so you shouldn't have any issue (there are plenty of articles that show / explain the correct frequency range for servos online). In fact most digital and analog servos work the same way it's just digital is way more precise. The control signal to servo is the same (unless you buy a specific servo that uses sbus or some other type of signal) it's just the analog servo only updates the signal to motor at 50hz but the digital servo updates at over 300hz. This is crucial in some cases, this update also applies to the self sustaining angle hold that servos do. If a outside force tries to push a servo the servo will attempt to hold its position. The 50hz update of the analog servo may be to slow for what ever it is you're trying to do and the servo will allow the outside force to effect it more then the digital will.

Thanks Billy!

When I used it with my Futaba controller, I got more angle.

Yeah - these have been GREAT for me. I have them in multiple trucks without an issue. Are you setting your endpoints correctly? If trying to overextend, it will fry them.

@@RoadsideRC Yes, I am. They work fine for one or two months and then, they stop working, so I am looking for other servo, but not sure which one is better than that one.

The warranty on amazon was 4bucks and covers you 3 years....I bought thr warranty..

Yes! They asked me if they could do that.

You are correct! Thanks!

Never tried!

Thanks. I am not 100% on how these work. Another viewer said if I could turn my endpoints past 100%, it would turn farther.

You are 100% correct! I have since used this with my Futaba radio, and it gets much more travel when set at 120% steering end point. Still, no where near 270*.

Less than $40! I think it was $38

31.99 on amazon. 4bucks for 3 year warranty

You are right! Since this video, I have used one of these servos with one of my Futaba controllers, and I was able to get more throw from the servo. Either way, it works good, and since the 270* is the same price as the 180* - I don't see why not to get it. Thanks for the comment!

I see you are close to/around cookeville tn. I live on the va/tn line, in Bristol Virginia. 2 "groups" of crawler ppl here. The 1 I'm with (laid back, crawl together when we can) & te other 1. LOL! WE outta get together sometime!

@@old-rcplane-phart Sounds great! I keep meaning to get over to the RRW Krawlzone. Ever been there? It is between us.

Thanks for the tip - I will certainly check it out. I have been using this servo horn on multiple vehicles without an issue though!

Nice! These servos have done really well for me.

@@RoadsideRC that's good can't argue with the price point!

Update on this: they are made of glass so I've tried the injoras since. Also made of glass. Now I'm using some powerHD units 😅 come full circle here

Interesting - I have literally never broken one...and I have them in MANY vehicles at this point.

270 allows more ability for wider turning. 180 is also OK

You are right!