I have a manic condition that raises the urge to design and build stuff and explore new things outdoors. Since my wife is a good sport, she lets me experiment with new ideas, tools and gadgets and whatever seems entertaining I post online: LGB trains, Amateur Astronomy with my Skywatcher 127 AZ-GTI telescope, and my homebuilt ROV Touch Muh Hull. Also a few extra Videos that I just feel like sharing. Mostly in English, some in German. :-)
Ich muss regelmäßig was basteln, weil ich sonst total unausgeglichen bin. Das meiste davon sind irgendwelche Dinge, die man im Freien einsetzen kann. Da meine Frau cool drauf ist, unterstützt sie mich dabei 100% und was immer zum Schluss dabei unterhaltsam erscheint wird online gepostet: LGB Eisenbahn, Hobby Astronomie mit meinem Skywatcher 127 AZ-GTI Teleskop und mein selbstgebauter Unterwasser Roboter (ROV) Touch Muh Hull. Und ein paar extra Videos. Das meiste in Englisch - wegen der schnöden Geltungssucht und einige wenige in Deutsch. :-)
Spitze !! Genau danach hab ich gesucht. Endlich kann ich überschlägig die Holzkonstruktion bzw Dimension meiner Pergola/Holzschuppen selbst berechnen. Vielen Dank dafür. !!
@@tyngchinchillachang838 i think it’s mostly a no-name thing. I doubt that it is still available. Just look for a usb-endoscope with the desired cable length. Newer models probably have a much better resolution anyway. Generally I would recommend the fishing cam from eyoyo or any other brand. There you get an entire system with a cable with 30 to 50 m length (100‘ to 150‘)
@@tyngchinchillachang838 just browse through my other videos. I have two about that particular topic. I never programmed anything: just relays and switches.
Im doing this for my college final year project i can clearly understand the making of ROV thank you.But can you please help me with making the controller although i have seen you already posted videos i cant really understand how to do so can you help me with it or post any easy alternative controller video thank you man❤
Impressive diy housing for the endoscope camera……… Can u share what’s the materials and items used to make the endoscope waterproof housing show in 2:34?
@@renewable8051 you have to get a fixed system. An underwater camera with cable. Or - if available - a waterproof and pressure tight case to allow an auxiliary cable to be connected to your camera. The plug into pc or an above-water transmitter is a matter of software which has to be compatible with the camera system.
Super Video. Vielen Dank dafür. Bezüglich der Dachaussteifung: kann man auf die Windrispenbänder verzichten, wenn man das Dach mit OSB Platten vollflächig verschraubt?
I thought the painting wasn't quite as precise as it might have been, but the construction and rigging were outstanding. As was the incredibly complex lighting... Much more ambitious than mine, so far! My own ones I do in sections, so the fo'castle, poop deck of a galleon, etc., have to be put in after the hull (as otherwise the ship won't fit into the bottle) which makes the construction quite fun! My next project is a Roman galley -- so I have oars as well as a mast, bowsprit and sails to think about! (Wish me luck: I'll need it!)
I watched the video just two days ago after a long time and thought the same thing about the paint. But my question is: will you post a video? That would interest me a lot! And I’m sure you’ll do fine! 😃👍🏻 And I’ve just subscribed to your channel.
Hello. Excellent video. I have a question for you... How can I configure my Meade tripod considering that my city is located at 10° North latitude? Thanks in advance. Greetings !
Hervorragende Frage, die schon öfters aufgekommen ist. Nein, auf keinen Fall. Beim Stahl gibt es ein ganz großes Problem, was nicht so einfach zu lösen/berechnen ist: Biegedrillknickversagen. (Ewig langes Wort; auf Englisch einfach: „buckling“) Der einfache Biegeknicknachweis (wie hier im Video) wird beim Stahl natürlich genauso geführt, wie beim Holz (max. Moment geteilt durch das Widerstandsmomet). Bei sehr leichten Konstruktionen wo man für die reine Tragfähigkeit mit einem sehr schmalen (billigen) Stahlträger auskäme, ist das maßgebende Problem die Schlankheit. Und das wiederum führt zu einem deutlich stärkerem Träger oder zu zusätzlichen Einbauten, welche das Biegedrillen verhindern. Kurz und knapp: es ist einfach zu komplex und aufwändig, um es in ein 20 Minuten RU-vid ausreichend zu behandeln. Hoffe das hilft weiter. 😀🙋🏼♂️
@@agermangineer schade , denn wir gehen davon aus das wir ein Carport Konstruieren sollen in unserer Meisterprüfung. Da wir das nie hatten wäre es cool gewesen es irgendwo erklärt zu bekommen 😅 trotzdem danke
Echt Klasse erklärt, auch für Laien wie mich. Wir planen gerade unseren Carport und möchten dem Statiker dann gerne unsere Rechnung zeigen. Mal sehen, ob wir das mit deiner Hilfe richtig machen. Nur eine Frage: Wir möchten auf dem Dach eine extensive Begrünung. Deren Gewicht wird mit bis zu 150 kg/m² angegeben. Ab Minute 9 sagst du, das Gewicht der Begrünung muss bei der Ermittlung des Gewichts addiert werden. Du addierst aber kg/m und ich habe das Gewicht der Begrünung in kb/m². Ich berechne das dann so wie die Dachhaut, also geteilt durch den Trägerabstand, korrekt? Also ~ 120 kg / m ...
Absolut richtig, nur nicht geteilt durch den Abstand sondern mal. Aber ich sehe, dass Ihr das richtig gemacht habt: 1,5 kN / m^2 x 0,8 m = 1,20 kN/m. 😀👍🏻
@@agermangineer Ja, klar, falsch aufgeschrieben :-) Danke für die Korrektur. Wir haben nun mit der Dachbegrünung einen Wert von 2,85 kN / cm berechnet, was über die 1,66 kN / cm für Nadelholz rausgeht. D.h. wir wählen nun die Balkenstärke, -abstände, Maße und Auflage der Begrünung so, dass das passt. Wenn wir nun kein Nadelholz nehmen, wo finde ich die S10 C24 Werte anderer Holzarten?
@@tomglasauerden rechnerischen Widerstandswert von Holz zu bestimmen ist kompliziert. Deshalb hab ich das bewusst pauschal gemacht, damit das Video unter 1 Stunde bleibt. Es stimmt zwar, dass es bessere Holzarten gibt, aber ich wüsste gar nicht wo ich die herholen sollte, weil im Bauwesen grundsätzlich C24 verwendet wird. Von daher: besser die Konstruktion verstärken. Allgemein ist Laubholz natürlich stabiler. Aber auch hier gibt es Unterschiede - das bedeutet, dass Eiche mit D24 mit C24 Nadelholz gleichzusetzen ist. Sollte man aber tatsächlich Laubholz mit D30 (mit entsprechendem Zertifikat) bekommen, kann man grundsätzlich den hier genannten Widerstand um ca. 20% erhöhen. 😉 Also… machbar schon, aber wissen was zu beachten ist.
@@agermangineer Verstanden. Also verstärken. Danke 🙂 Nach meinem Verständnis macht die Verstärkung in der Höhe der Träger am meisten Sinn, oder? Mit Dachbegrünung würde zumindest der Wert von 1,66 nie erreicht. Bei einer Erhöhung der Breite x Höhe auf 10 cm x 24 cm passt das.
Hallo ist zwar schon älter das Video aber ich hätte eine Frage zu der Endoscopekamera. Die ist doch mit USB oder? Wie funktioniert das mit dem langen Kabel?
This is absolutely amazing! This design has so much potential! Your ingenuity in this project had so much attention to detail and I'm thinking of trying this myself to recover a lost camera from the bottom of the ocean.
great project, i wonder what if you just install the bilgepump (not reassembly by other propeller). Will the thrust just same or weaker or maybe stronger?
Inside the pump is just a little pelton turbine. Meaning you have very little thrust: forward you have water exiting a hole and reverse… suction into a hole - no thrust and a bit of thrust through the pump intake… going into a different direction. So: I wouldn’t recommend it. 😀🙋🏼♂️
oh i see@@agermangineer , i want to make sea scooter. Is it recommended use this type of bilge pump for cheap and simple project? maybe need more than two of them 😁
@@imacoid well, if you use one for each direction (forward only) and if you have a good power supply with a short tether you will be able to operate it. A colleague of mine did that to steer a small buoy.
i love to hear it@@agermangineer , what do you mean by good power? it is possible to use more than 12v? and good tather mean change the cable to the bigger diameter i guess. Sorry if you hard to understand my english, i'm Indonesian
Die Sache hat einen Haken: Stahl hat eine Form des Versagens, welche man nicht mal eben so mit ein paar einfachen Faustformeln berechnen kann. Von daher eignet sich das nicht für ein DIY Heimwerker-Video. Sorry.