We are a service company based in Wilton, IA. What is unique about us is we like to make what we do interesting. We repair, deliver, and sell fitness equipment and service is the heart of our company. But we like to have a little bit of fun.
We are here to help you and inform you about fitness equipment and it’s benefits, all while blasting you with information you didn’t know you needed.
You may see Bravo The Treadmill Hero pop up in our videos here and there. He’s our guy, he knows it all, and he can fix just about anything!
Don’t be shy, Check us out on Facebook, Instagram, Tik Tok, and even take a look at our website, treadhero.com.
Hm.. I cant turn the belt 90 degrees but it also has shavings so I am confused lol I also saw how to take the belt off but don't know what to do if the belt is too tight on the front. Ill have to try that drawing a line test.
I have a life fitness 95ti, just put a new belt on, no matter what I do, the belt slips, front roller will keep spinning. I have the rear adjustment bolts as tight as they will go. What could my issue be?
What if I did everything you just said not to do. I started adding more lubricant when I felt the heat and the friction but still give it a little quarter turn every time I did it. Can my treadmill be saved or is it too late to repair the harm caused?
Thanks for the video! I did everything you mentioned but unfortunatly my case was extreme. The metal support that supports the deck to the chasis broke after 6years and at least 5000km. I will try to solder it but it may only be a temporary fix. Nevertheless i watched your videos and i was able to change the belt 8months ago.
I have a model Q 37xi and it will shut down in the middle of my workout but it still has power so I can reset but have to start over. Bought new in 2014.
After I centered my new treadmill's belt (Horizon 7.0), it looks cocked as if it isn't centered at the OTHER END near the motor. Is it just a matter of it will center itself if I keep the bottom end centered. Or, do I have to take the motor cover off and fidgit with something at that end?
I answered and said, "If I have found favor in thy sight, O Lord, show this also to thy servant: whether after death, as soon as every one of us yields up his soul, we shall be kept in rest until those times come when thou wilt renew the creation, or whether we shall be tormented at once?" 76 He answered me and said, "I will show you that also, but do not be associated with those who have shown scorn, nor number yourself among those who are tormented. 77 For you have a treasure of works laid up with the Most High; but it will not be shown to you until the last times. 78 Now, concerning death, the teaching is: When the decisive decree has gone forth from the Most High that a man shall die, as the spirit leaves the body to return again to him who gave it, first of all it adores the glory of the Most High. 79 And if it is one of those who have shown scorn and have not kept the way of the Most High, and who have despised his law, and who have hated those who fear the Most High -- 80 such spirits shall not enter into habitations, but shall immediately wander about in torments, ever grieving and sad, in seven ways. 81 The first way, because they have scorned the law of the Most High. 82 The second way, because they cannot now make a good repentance that they may live. 83 The third way, they shall see the reward laid up for those who have trusted the covenants of the Most High. 84 The fourth way, they shall consider the torment laid up for themselves in the last days. 85 The fifth way, they shall see how the habitations of the others are guarded by angels in profound quiet. 86 The sixth way, they shall see how some of them will pass over into torments. 87 The seventh way, which is worse than all the ways that have been mentioned, because they shall utterly waste away in confusion and be consumed with shame, and shall wither with fear at seeing the glory of the Most High before whom they sinned while they were alive, and before whom they are to be judged in the last times. 88 "Now this is the order of those who have kept the ways of the Most High, when they shall be separated from their mortal body. 89 During the time that they lived in it, they laboriously served the Most High, and withstood danger every hour, that they might keep the law of the Lawgiver perfectly. 90 Therefore this is the teaching concerning them: 91 First of all, they shall see with great joy the glory of him who receives them, for they shall have rest in seven orders. 92 The first order, because they have striven with great effort to overcome the evil thought which was formed with them, that it might not lead them astray from life into death. 93 The second order, because they see the perplexity in which the souls of the unrighteous wander, and the punishment that awaits them. 94 The third order, they see the witness which he who formed them bears concerning them, that while they were alive they kept the law which was given them in trust. 95 The fourth order, they understand the rest which they now enjoy, being gathered into their chambers and guarded by angels in profound quiet, and the glory which awaits them in the last days. 96 The fifth order, they rejoice that they have now escaped what is corruptible, and shall inherit what is to come; and besides they see the straits and toil from which they have been delivered, and the spacious liberty which they are to receive and enjoy in immortality. 97 The sixth order, when it is shown to them how their face is to shine like the sun, and how they are to be made like the light of the stars, being incorruptible from then on. 98 The seventh order, which is greater than all that have been mentioned, because they shall rejoice with boldness, and shall be confident without confusion, and shall be glad without fear, for they hasten to behold the face of him whom they served in life and from whom they are to receive their reward when glorified. 99 This is the order of the souls of the righteous, as henceforth is announced; and the aforesaid are the ways of torment which those who would not give heed shall suffer hereafter." 100 I answered and said, "Will time therefore be given to the souls, after they have been separated from the bodies, to see what you have described to me?" 101 He said to me, "They shall have freedom for seven days, so that during these seven days they may see the things of which you have been told, and afterwards they shall be gathered in their habitations." 102 I answered and said, "If I have found favor in thy sight, show further to me, thy servant, whether on the day of judgment the righteous will be able to intercede for the unrighteous or to entreat the Most High for them, 103 fathers for sons or sons for parents, brothers for brothers, relatives for their kinsmen, or friends for those who are most dear." 104 He answered me and said, "Since you have found favor in my sight, I will show you this also. The day of judgment is decisive and displays to all the seal of truth. Just as now a father does not send his son, or a son his father, or a master his servant, or a friend his dearest friend, to be ill or sleep or eat or be healed in his stead, 105 so no one shall ever pray for another on that day, neither shall any one lay a burden on another; for then every one shall bear his own righteousness and unrighteousness." .....2 Esdras 7:75 ////////////
Hi there, unfortunately my treadmill running belt has in fact created that crease in the center, is there anyway to remedy that at this point? Or am I in need of a new belt?
I had this one boss. His writing was basically that. Once he wrote down the same town's name, 3 different ways. One of the drivers was called John, and I don't know why, he would wrote the OHN as a pentagram. The guy's name was J⭐️
Hi. Thanks for your video. Have tested my Nordictrack heat switch cct you highlighted in your video and comes up fine on multi meter. Getting a red light on the circuit board that flashes in 8 flash sequences when I start the motor from dashboard controls but nothing happening with the motor. Any tips??
How do you know if it's enough lubricant? How tight should the belt be? Is there a way to tell that? I've only had mine a year, and while the slipping isnt entirely impeding on my running, it still feels like its there a bit. Drive belt is still very good, and i feel like i added a bunch of lubricant, but its still kinda there. And right now, its tight enough that my hand just goes ⅓ of the way into the width of the deck.
Reebok zr9 relay clicks once but not turning on display is just blue no digital figure on lcd console have had motor control board sent off and checked
My treadmill belt is in the middle when not in use, but when I run on it after about a few minutes it is on the right scraping the edge making a high pitched whirring sound - any reason for this? I think it’s how I run, but based on this, anything I can do to counter balance this? Or is it safe to not do anything? Should I add more lube? Should I adjust the belt to always go to the left?
My treadmill(PRO-FORM 590QS Quiet Deck) starts and works as long as I am only walking but once I get to running speeds then it stops after a few seconds to a minute. What should I look for? I’ll definitely run the diagnostic that you have explained here. Another thing, for past few years the tread has become quite loud. It hasn’t bother me since it’s been moved from bedroom to the garage and I usually have my AirPods on but it used to be very quiet for the longest time. Don’t know if it’s aged or some parts can use some lubricants to make it quiet again? Btw, very well explained and easy understand video👍, thank you for sharing 🙏
My Nordictrack treadmill stops one minute after I step on it. Once I get off the belt, it moves again right away. Does anyone have an advise on how to fix this?
Hi Joe, first off , t hanks for the great video, I have an old pro Form and I have tested all the things in^ your video such as motor , belt, most of the wiring, and yet the motor still won't run, I have all working on the consuthl ,if I put the key in I hear the clicking ,I can program, but still no movement so I am stumped right know so I would be grateful if you could possibly send me a few pointers please I am in the UK and I am having difficulty getting help here my Email is mickytidman30@gmail.com thanking you in anticipation Kind regards Mick.
You are brilliant! Two years of fighting with this issue, receiving bad advice from techs at Nordictrack to replace both the control board and the resistance motor, which obviously were never the issue. They had no clue how to fix
You have patience of a Saint. Lol. I do service and can't stand how filthy you get from doing work on them. Great video. Keep up the great work. Thx again
Proform CARBON T10 - PFTL99720.0 treadmill turns on, screen lights up shows logo, sits there loading and does nothing but hit retry, it beeps when you hit retry but does nothing,,,, fans work on it, incline works.... speed does nothing but beep,, any idea ?
Proform CARBON T10 - PFTL99720.0 treadmill turns on, screen lights up shows logo, sits there loading and does nothing but hit retry, it beeps when you hit retry but does nothing,,,, fans work on it, incline works.... speed does nothing but beep,, any idea ?